Specs.pdf

USAG WP CSD-2013-01

JAN 2012

SPECIFICATIONS

Cadet Swim Trunks

1. Scope: The intended use is by the United States Corps of Cadets for strenuous long-term training in indoor - outdoor pools and fresh or salt water bodies.

2. Basic Material:

a. Shell - 100% nylon supplex

b. Liner - 100% polyester or nylon mesh

3. Color:

a. Shell - all black

b. Liner - all white

4. Basic Design: Boxer style with liner, covered elastic waistband with a one piece inside drawstring, There shall be cut side pockets on side seam – beginning two and three-quarter (2.75) inches down from the top of the waistband. The pocket opening shall be six and one half (6.5) inches in length. There shall be no manufacturer logos, emblems, insignia or other visible markings. The inseam shall be five (5) inches in length.

5. Construction: All seams shall have a clean finish – no raw edges. All stress points shall be tacked for reinforcement. Bottom hem (approximately one half (0.5) inch) shall be turned under and topstitched. All seams, stitches and threads shall be of a durability and quality level to match the garment’s intended use.

6. Performance: The entire suit shall remain colorfast. Overall shrinkage shall not exceed 5% (percent). The finished product shall be produced to endure daily wear in a swimming environment as described above. The garment shall be constructed so to withstand standard commercial laundering to include both a wash cycle and a commercial drying cycle in a machine dryer.

7. Evaluation and Acceptance: Quote samples will be inspected and measurements taken to ensure compliance with the provided specifications.

8. Label: A permanent cloth label with size, fabric content and care instructions shall be stitched into the inside, back of the garment.

9. Sizing: Basic sizing requirements (in inches)

Small Medium Large X-

Large

XX-Large

Waist Relaxed (+/-0.5”) 24 26 28 30 32

Waist Extended (+/- 0.5”) 33 39 41 44 46

Hips (7” down from top of waistband +/-

0.5”)

41 45 49 53 57

Leg Opening (+/-1.5”) 27 29 31 33 35

!! NOTE: ALL OTHER SIZE DIMENSIONS TO BE PROPORTIONAL TO ABOVE DIMENSIONS. !!

10. Bar Code Labels Characteristics:

a. The barcode shall be in the Three of nine (3 of 9) format

b. The barcode label shall be affixed to each individual package, (each individual swim trunk package) so that it can be read without opening the package

c. The barcode label shall be easily removable by the customer

d. The barcode label shall remains intact while in storage in a warehouse environment

e. The size of the barcode label shall be large enough to be read, proportionate with the size of the item and package. Approximate size suggestion: Two and a half inches (2.5”) by Three and a half inches (3.5”)

f. Barcode Label may also be affixed to carton as well and shall be obviously displayed.

Each Bar Code should contain the following information:

BARCODE (with start and stop characters of *)

STOCK NUMBER

DESCRIPTION

SIZE

Contactor shall submit a sample of the barcode label for acceptability and government approval.

A sample label for format follows

OR

TRUNKS SWIM MEN

Size: XX-LARGE

11. Packaging:

a. Each swim trunk shall be individually wrapped or packaged

b. Barcode label shall be clearly visible without opening package

c. Each box, carton, case or shipping container shall contain only one size. If boxes, cartons, cases or shipping containers are shipped on pallets sizes may be mixed on same pallet

d. Each box, carton, case or shipping container shall be clearly marked with contents to include item, size and quantity