SPECS - Bead Breaker 02-24-2025.pdf
PDF 119 KB Posted
- Attached to
- Aircraft Tire Bead Breaker Federal contract opportunity
- Solicitation number
- FA489725SS007
About this file
This is a specification sheet detailing requirements for one pneumatic wheel and tire bead breaker for the 366th Maintenance Squadron at Mountain Home Air Force Base, Idaho. The document outlines minimum technical specifications including 25,000 lbs load capacity, hydraulic drive motor, pneumatic power supply, and adjustable forks for wheels up to 22" in diameter.
The contractor must provide installation, equipment setup, and training of government personnel, with a 1-year warranty on both components and labor. Delivery is required to the Crash Recovery Section at Mountain Home AFB within 30 days after contract date. The contractor is responsible for ensuring proper operation, maintaining facility cleanliness during installation, and providing post-installation technical support either by phone or in-person. This document appears to be a draft dated February 24, 2025, supporting a sources sought announcement (FA489725SS007) for the Department of the Air Force Air Combat Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPECS - Bead Breaker 02-27-2025.pdf | ||
| SS Notice - FA489725SS007 - Bead Breaker.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAFT - 2/24/2025
SPECIFICATION SHEET
Mountain Home AFB, ID
Wheel and Tire Bead Breaker 12 Dec 2024
1. GENERAL: The 366th Maintenance Squadron on Mountain Home AFB, ID requires one (1) pneumatic bead breaker to include installation and onsite training of Government personnel on all equipment.
2. Bead Breaker MINIMUM SPECIFICATIONS: The Bead Breaker must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics
2.1.1. Load Capacity: 25,000lbs
2.1.2. Drive Motor: Hydraulic
2.1.3. Power Supply: Pneumatic
2.1.4. Adjustable forks suitable for wheels up to 22” in diameter.
2.2. Warranty
2.2.1. All components: 1 years
2.2.2. Labor: 1 year
3. INSTALLATION: The Contractor shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the requested Bead Breaker.
3.1. The Contractor shall install all requested equipment in accordance with (IAW) manufacturer’s specifications.
3.2. The Contractor shall ensure proper operation of the installed Bead Breaker.
3.3. Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the Contractor.
3.4. The Contractor shall ensure cleanliness of Government facility is maintained at all times.
3.5. The Government will inspect facility for cleanliness prior to Contractor’s departure.
3.6. Any damage done to Government property by the Contractor shall be repaired by the Contractor at the Contractor’s expense.
4. TRAINING: The Contractor shall conduct training of entire system to Government personnel.
4.1. Following completion of installation by purchaser, the Contractor shall provide technical support if there are any issues either by telephone or in person.
5. SPECIFICS:
3.1. Shipping must be included in the quotation.
3.1.1. Contractor shall deliver to Crash Recovery Section – 865 Alpine St Suite 105, Mountain Home AFB ID, 83648
3.1.2. Delivery will be no later than 30 days after date of contract (ADC).
File details come from the government source that posted it. Updated .