Specifications1301239804.pdf

Required specifications for maintenance of a L3-ESSCO M96 metal space frame radome in Guam:

• Provide all labor, travel, materials, and equipment to wash, scrape, and fully paint a metal space frame radome in Guam

• The specific radome to be wash, scraped, and fully painted is a L3-ESSCO Model M96-86-7108, S/N 14-3197A-001, metal space frame radome

• The vendor must have at least ten years of experience with the required maintenance of L3- ESSCO metal space frame radomes

• The washing, scraping, and painting of the above defined metal space frame radome must be done in accordance with all applicable instructions provided in the the L-3 ESSCO, Inc TM14-21 Installation, Operations & Maintenance Manual for the M96-86-7108 Radome

• The vendor’s employees to perform the maintenance must be US citizens and hold rope access certification, first aid, OSHA 10, and certifications associated with working from heights

• The vendor must abide by all OSHA, HTSI, and local safety regulations

• The vendor’s Standard Operating Procedures must be based on a Health & Safety Program

Guide approved by NRL Code 8124

• The vendor will be responsible for providing all tools, materials, safety gear, and lift equipment necessary to perform the required maintenance

• Once the required maintenance is completed, a final acceptance document will be signed by

NRL Code 8124 and the vendor’s on-site supervisor

• The vendor must have experience with the maintenance of a L3-ESSCO Model M96-86-7108, S/N 14-3197A-001, metal space frame radome

• The period of performance is six months after receipt of order