Specifications Wildlife Panels 16 Foot.pdf
PDF 89 KB Posted
- Attached to
- Wildlife Panels, GFP Annual
- Solicitation number
- IFB 24IFB10263
- Issued by
- South Dakota
About this file
The provided document contains the specifications for 16-foot wildlife panels to be manufactured and delivered under an annual state contract in South Dakota. The panels are to be constructed of 14-gauge, 1-inch square steel tubing with squared top corners and hinge pins made of 1/2-inch steel rod. The panels will have four horizontal crossbars, with vertical spacers between the top three bars, and will be attached to standard 16-foot, 50-inch, 4-gauge galvanized cattle panels either by welding or using L-channel. The contract opportunity is for the manufacture and delivery of these wildlife panels to designated locations within the state of South Dakota on an annual basis.
The contract opportunity does not provide any details on pricing terms, set-asides, incumbents, funding requirements or sources, or other salient commercial information. The document focuses solely on the technical specifications for the wildlife panels to be provided under this annual state contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SDVendorManual_20211221.pdf | ||
| Specifications Wildlife Panels 12 Foot.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Wildlife Panel 16 Foot Specifications:
• Dimensions, 194.5” long X 84.25” high. (*length dimensions can be slightly adjusted to tightly fit cattle panels for welding simplification)
• Steel tubing 1” square, thickness 14 gauge.
• Top corners of panel tubing are to be squared.
• Hinge pins constructed from 1/2" diameter steel rod.
• The upper hinge pins are 5.75” long with 3.5” exposed below the strap and .25” above the strap for welding.
• The lower hinge pins are 5” long with 2.75” exposed below the strap .25” above the strap for welding.
• The bottom of the lower hinge pin strap is 18” above the bottom of the panel.
• The bottom of the upper hinge pin straps is 70.5” above the bottom of the panel.
• The bottom of the lower hinge loop is 15.75” above the bottom of the panel.
• The bottom of the upper hinge loop is 69” above the bottom of the panel.
• Hinges loops constructed from 2” X 1/8” steel strapping.
• Panel to be made up of 4 horizontal tubes; one 8” above the ground, one at 59” above the ground, one at 71” above the ground, one at the top of the panel.
• Standard galvanized cattle panel 16’ X 50” X 4 gauge, welded to gate every 16” with 2” welds all the way around the entire panel OR held in place by 1” lengths of L-channel every 16” all the way around the entire panel.
• Vertical spacers between the top 3 horizontal bars 65” (horizontal) inches from either side of the panel.
File details come from the government source that posted it. Updated .