Specifications Sheet_FA930225Q0036.pdf

1. P/N QSX-VQR8-1110-10-64-24AL-C7-DP-HR-LD6-STC

L/S/C-band telemetry dual STC transmitter

(V) Variable Rate, auto-scaling of deviation and filter BW

(Q) 1435.5 MHz to 1534.5 MHz

1750 MHz to 1855 MHz

2200.5 MHz to 2300.5 MHz

2300.5 MHz to 2394.5 MHz

4400 MHz to 4950 MHz

5091 MHz to 5150 MHz

Tuning in 0.5 MHz steps

(R) RS-422, 120 ohms differential

(8) RS-422, 115,200 baud rate

(1) ARTM Tier 0 (PCM/FM), 0.05 - 14 Mbps: YES

(1) ARTM Tier I (SOQPSK-TG), 0.1 - 28 Mbps: YES

(1) ARTM Tier II (Multi-h CPM), 0.1 - 28 Mbps: YES

(0) BPSK, QPSK, OQPSK 0.05 - 14 Mbps: NO

(10) 2 x 10 Watts

(64) Pin Out Configuration

(24AL) Package: 4" x 3" x 2" = 24 inches³

Primary Connector: Female MDM-15

RF Output Connector: 2 x SMA Female

Input Power: On Primary

Options selected:(LD6) LDPC Forward Error Correction Encoding (all six IRIG 106-15 codevariants) k=4096 r=1/2 k=1024 r=1/2 k=4096 r=2/3 k=1024 r=2/3 k=4096 r=4/5 k=1024 r=4/5

(HR) High Bit Rate (23 Mbps PCM/FM and legacy, 46 Mbps SOQPSK and MultihCPM)

(DP) Dual Power (64 settings, user selects one for "high" and one for "low,"chosen via baseband connector pin)

(C7) IRIG 106-07 control protocol (see www.quasonix.com/documents/quasonixinterpretation-irig-106-13-appendix-n-rev-10 to learn how this differs fromthe "standard" transmitter protocol)

(STC) Dual Channel Telemetry Transmitter with Space Time Coding (STC)

Primary Connector (Female MDM-15) Pins

1 DC Power In

2 DC Power Return

3 Serial Control Reply Positive from Transmitter (TXD +)

4 Differential Clock Positive

5 Differential Data Positive

6 Serial Control Ground

7 RF On/Off

8 Serial Control Input Positive to Transmitter (RXD +)

9 DC Power In

10 DC Power Return

11 Serial Control Reply Negative from Transmitter (TXD -)

12 Differential Clock Negative

13 Differential Data Negative

14 Dual Power

15 Serial Control Input Negative to Transmitter (RXD -)

2. P/N - QSX-RDMS-1C37-Q0-1111-04-14-EQ-ET

Single-channel compact receiver

(RDMS) Third-Generation RDMS™ Telemetry Receiver / Demodulator / Synchronizer

(1C37) Single-channel compact receiver

DISPLAYS: None

FRONT PANEL CONTROLS: No Controls

GRAPHICS: Eye pattern, Constellation, Spectrum

DATA QUALITY ENCAPSULATION: Included, bypassable

(Q0) FREQUENCY BANDS, TUNED IN 1Hz STEPS:

1435.5 MHz to 1534.5 MHz (Lower L - Standard Range)

1750 MHz to 1850 MHz (Upper L - Standard Range)

2200.5 MHz to 2394.5 MHz (S Band - Standard Range)

4400 MHz to 5150 MHz (C Band - Standard Range)

(1) ARTM Tier 0 (PCM/FM), 24 kbps - 23 Mbps: YES

(1) ARTM Tier I (SOQPSK-TG), 100 kbps - 46 Mbps: YESSpace-Time Coding Demod with

SOQPSK-TG: YES

LDPC Decoder with SOQPSK-TG: YES

(1) ARTM Tier II (Multi-h CPM), 1 Mbps - 46 Mbps: YES

(1) BPSK, QPSK, OQPSK, AQPSK, UQPSK, AUQPSK, Digital PM: YES

(04) PINOUT CUSTOMIZATION: RS-422 serial control interface: 115,200 baudrate

Options selected:

(14) (14) 14 SAW IF Filters

(EQ) (EQ) Adaptive Equalizer

(ET) Extended Temperature (-40°C to +85°C)

I/O Connectors:RF IN (1) SMA female

IF IN None

IF OUT (1) SMA female

TTL C&D None

RS-422 C&D 3 sets on MDM-37 male

ETHERNET None

ANALOG OUT 4 on MDM-37 male

AM OUT 2 on MDM-37 male

AGC OUT 2 on MDM-37 male

3. P/N QSX-AC-34-HS-28V-SP

Accessory

Fan-cooled heat sink for 4" x 3" transmitter. Operates from 21 VDC to 34 VDC, powered from existing transmitter wiring. No separate power leads for fan.

Includes MDM-15 jumper cable to connect heat sink to transmitter. Includes BG35352, 4X3