Specifications Reeling Machine.docx

This is a Statement of Work specifying the technical requirements for a heavy-duty reeling machine required by the U.S. Coast Guard Surface Forces Logistics Center (SFLC). The solicitation seeks a Model NK5-015-001 RH shafted take-up machine capable of supporting reels 24 to 60 inches in diameter by 38 inches wide with a 5,000-pound lifting capacity and approximately 8,000-pound maximum pulling capacity. The machine must feature a 7.5 horsepower hydraulic variable speed, bi-directional drive system powered by 240 VAC single phase, a 1704 heavy-duty measurer for material ranging from 1/8-inch to 4-inch outer diameter equipped with knurled wheels and double spring for no-lube wire, and an electronic pre-determined stop-to-length counter with slow down and pre-scaling capabilities and LED display for in-field calibration.

The equipment will be located at U.S. Coast Guard, 2401 Hawkins Point Road, Building 88A, Curtis Bay, Maryland 21226, with contracting and technical points of contact identified as Thomas Sparr (COR) at Thomas.F.Sparr@uscg.mil and (510) 220-8081, and James Morehouse at James.T.Morehouse@uscg.mil and (302) 242-5178. This is a combined synopsis/solicitation for a commercial item issued as Request for Quote (RFQ) 52000QU260002937, with awards anticipated on a Best Value basis considering complete requirement fulfillment, required timeframe compliance, and price. Payment terms are NET 30 in accordance with FAR 52.232-25, and vendors must maintain active SAM.Gov registration or provide proof of registration submission.