Specifications_Motors_for_Parker_Boat.pdf

Engine Type V6 Displacement 4.2L Bore x Stroke Prop Shaft Horsepower 250hp at 5500 rpm Full Throttle RPM Range 5000 - 6000 rpm Alternator Output at W.O. T. 50 - 70 amp Compression ratio 10.3:1 Fuel Induction System EFI Weight Ϯ

Octane 87 Recommend Engine Oil Recommended Fuel filtration Exhaust Intake 24 Ignition TCI Microcomputer Spark Plug LFR6A-11

50 - 70 Amp Electric

Lubrication Wet Sump Engine Oil Capacity 6.3L/6.0L w/with filter Recommended Cooling Thermostatic Control

Gear Ratio 1.75:1 Shaft Length Degree of Tilt DES: 69°, Mechanical 70° Degree of Trim 3° through + 16°

Dry Weight without built-in DES Dry Weight with Mechanical controls Mounting Centers 28.5" Steering Steering Angle (maximum)

CARR. 301 KM 5.1 - BO. COROZO

CARIBBEAN ISLANDS NWR

BOQUERON, PR 00622

SPECIFIFICATIONS FOR PURCHASE OF MOTORS FOR BOAT

UNITED STATES DEPARTMENT OF THE INTERIOR

25" - 30" - 35" (F250 DEC Only)

96 x 96mm (3.78 x 3.7 in)

250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs) Recommended Fuel

Yamalube 4M (See owner's manual) Yamaha 10 Micron Fuel / Water Sefparating Filter (external)

DESCRIPTION OF EQUIPMENT: Parker 2501, Small Craft, Boat include Power & Non Power, 25 ft.

Through Propeller

Alternator Output Starting Systems

Ethanol Blend Limit 10% Maximum

NOTE: Ϯ weight refers to shortest shaft length, and is measured without motor oil, gearcase oil and propeller (except models 25 hp and under, which include a standard propeller). All jet model weights include the jet pump assembly (weight estimated).

Dry Weight with built-in DES 25" shaft 277kg (611 lbs.), 30" shaft 283 kg (624 lbs), 35" shaft 288 kg (635 Lbs) 25" shaft 255 kg (562 lbs.), 30" shaft 261 kg (575 lbs), 35" shaft 265 kg (588 Lbs) 25" shaft 255 kg (562 lbs)

Integrated, Electric Actuation 32° from center, either direction