Specifications IFB 24IFB11154.pdf

Trailer-Mounted Fish Distribution Tank

Tank and trailer combo to be bid as a turn-key operation that includes delivery to South Dakota Game, Fish and Parks; 20641 SD HWY1806, Ft. Pierre, SD, 57532. Agency contact: Mark Fincel, 20641 SD HWY

1806, Ft. Pierre, SD, 57532; phone –605-223-7704; email – Mark.Fincel@state.sd.us

Delivery by May 1, 2025

Distribution Tank –

Distribution tank to have three compartments 250 gallons each for a total capacity of 750 gallons. Tank footprint designed with dimensions to maximize workspace along each side when mounted on trailer but not to exceed a height of 40 inches.

Distribution tank walls, partitions, and floor to be double-walled and insulated (minimum of 2 inches;

closed cell foam that will not absorb water).

Inner walls to be constructed of aluminum; outer walls constructed of aluminum or fiberglass. All construction materials of a thickness that meets or exceeds the industry standard with additional re-enforcement where needed (e.g., floors, corners, lift points, etc.).

Each compartment with –

Sloped floor toward bottom (belly) outlet with 8-inch valve or equivalent that is watertight and can be easily opened/closed from drivers-side of tank/trailer; t-pull handles (or similar) to be recessed or positioned to avoid being a tripping hazard when working along driver-side of tank.

Aluminum door that provides a large opening to facilitate fish loading. Door to include gas charged lift support struts, a durable handle for opening/closing, two stainless steel locking latches setback from drivers-side edge of compartment to reduce snagging when loading fish, and a durable hydraulic cylinder style lid support to hold door open during loading. Doors open from the drivers side.

Three vent scoops to allow air circulation (≈3-inch opening, 1 per tank) –located on passenger side

(opposite of doors).

Three 12-volt Fresh-Flo Model TT (PM8014) each held in place with toggle clamps for easy removal, if needed. Wiring to include all necessary components (e.g., central junction box with fuses, indicator lights, toggle switches, etc.) for each fresh-flo. Central junction box with indicator lights and toggles to be located on passenger side of tank.

Oxygen Delivery/Monitoring –

Includes “mount” or “bracket” for two compressed O2 cylinders [industrial size 200 or K (5 ft. tall and 10” diameter); not included in bid] that is located near front passenger side of tank/trailer.

Oxygen supply line with Victor dual stage regulator (connected to O2 cylinder) to supply oxygen to 3-outport oxygen manifold located at front (cab end) of tank. Oxygen manifold equipped with three flowmeters (prefer Victor flowmeters with 0.5 – 7.0 lpm capacity; one for each compartment) that meter oxygen flow to Point-Four microbubble ceramic plate oxygen diffusers (27.50 long x 3.25 wide) or mailto:Mark.Fincel@state.sd.us similar product in each tank. Ceramic diffusers not to be inset in tank bottom (diffusers to lay on bottom so can be pulled from tank without draining the tank)

Trailer –

Aluminum constructed deck-over trailer (maximum width 8ft 6 in) capable of hauling above fish distribution tank safely and efficiently. (not to exceed 14,000 lb GVWR).

Bumper-pull trailer with standard 2-inch coupler, if possible.

Include custom or pre-built step(s) with tread depth of at least 4 inches on each step and a rail/handle near front driver-side of trailer for easy and safe access onto flatbed

Include appropriately sized tongue jack, LED running lights, spare tire and rim (mounted on trailer).

Include aluminum toolbox set on passenger side of tank to allow storage of 5-gallon buckets, nets, hoses, etc. provided sufficient room is available.

Successful bidder to contact Agency contact prior to construction for review of specifications.