Specifications for 20 used shipping containers 2024.pdf

Specifications for 20ft Used Conex shipping containers

All quantities are estimated.

This bid solicitation has been reserved for Small Business Contracting. Only those Bidders certified as DGS Small Businesses through the Small Business Contracting Program may submit a bid for these materials.

Please complete and attach the BOP-2201 Worker Protection Form to your bid.

WORKER PROTECTION - Pursuant to Executive Order 2021-06, Worker Protection and Investment

(October 21, 2021), the Commonwealth is responsible for ensuring that every Pennsylvania worker has a safe and healthy work environment and the protections afforded them through labor laws. To that end, contractors and grantees of the Commonwealth must certify that they are in compliance with all applicable Pennsylvania state labor and workforce safety laws. Such certification shall be made through the Worker Protection and Investment Certification Form (BOP-2201) and submitted with the bid, proposal or quote.

The container must be wind & watertight All rust is hammer-tested prior to delivery.

Rusty pinholes and thinning steel are repaired with an overlay patch, extending beyond the affected area. Scratches and Dents should not exceed 4 inches inward or outward.

The seals must be intact The door seal gaskets secure the wind and watertightness of the moving door parts of the shipping container. The door gaskets will show no daylight from the interior of the container outward. The retainer strip holding the door gaskets will be intact and secured.

The floor is intact and in good condition All container floors must be inspected to ensure they are intact, providing a secure environment for storing goods. Flooring will not be broken or show holes, especially through to the undercarriage. Delamination may be present but will not exceed multiple layers. The floor should not be flexing or "spongy. “Holes and excessive delamination must be repaired with a wooden or steel plate. Crossmembers must be checked in conjunction with flooring. No broken welds should be present, and the crossmember should remain flush with the flooring.

The doors on the container open & close The doors to be able to be fully opened and peeled back. Container doors are heavier;

however, they should open without maximum effort involved.

The door hardware has no malfunctions To close and lock the container from outside elements The lock rods to be able to rotate open and close, to lock or unlock the latch.

Delivered to:

4 qty- 20 ft Conex containers PENNDOT 160 SR 519, Eighty Four PA, 15330

Specifications for 20ft Used Conex shipping containers

2 qty- 20 ft Conex containers PENNDOT 550 Lewicki Road, Canonsburg PA 15314

2 qty- 20 ft Conex containers PENNDOT 1064 National Pike, Washington PA, 15301

All containers need to face the cab of the delivery truck.

Site contact: Bonnie Cunningham RPC- 724-223-4480

Please contact Bonnie Cunningham for scheduling delivery. Inspections of units will be carried out at the time of delivery.