Specifications_Fish_Hauling_Tank.pdf
PDF 143 KB Posted
- Solicitation number
- 140FS224Q0179
About this file
This document provides the technical specifications for an aluminum transport tank with two compartments to be used for hauling live fish at the Saratoga National Fish Hatchery. The tank has detailed dimensions, compartment sizes, features, and equipment requirements such as discharges, drains, aerators, oxygen diffusers, and electrical controls.
The related federal contract opportunity is for the fabrication and delivery of this live fish hauling tank and a flatbed truck. The solicitation number is 140FS224Q0179 and is being issued by the Department of the Interior Fish and Wildlife Service. The key requirements include the aluminum tank dimensions, compartment sizes, and various features and equipment as specified in the attached document.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Truck Bed Specifications for Live Fish Haul Tank Saratoga National Fish Hatchery
Aluminum transport tank with two (2) compartments
• Outside dimensions 240”L x 90” W x 42” T
• .190 inner and .125 outer smooth aluminum walls. 3003-H14
• Aluminum framed walls and base of tank
• 2 compartments inside dimensions o Rear 86” W x 118.5” L x 38” T o Front 86” W x 116.5” L x 38” T
• Approximately 1414 gallons rear tank and 1419 gallons front tank
• Sloping floors to discharges
• (One) horizontal baffle per compartment.
• Horizontal full width x 10” tall and starts 12” below water line
• 2X2 tube framing on side and interior walls
• 2X4 tube framing on base of tank
• 2” insulations on all walls, floors and ceilings
• Exterior will be mill finish aluminum color
• (Two) 10” discharges with dust caps
• 10” pass thru tube from front compartment to rear
• Internal slide gates by each discharge
• (One) Slide gate by entrance to the pass thru tube
• (Two) 10” female couplers with 48” long pipe
• (Two) top open lids 52” wide x 30” deep. One for the back edge of each tank
• (Two) top open lids 45” wide x 30” deep. One for the driver’s edge of each tank o Stainless steel piano hinges and rubber gaskets on all lids o Gas shocks stainless steel latches and aluminum handle for each tank
• (Six) Ram air vents sets, three (3) sets per compartment
• (Six) Oxygen line port into each compartment.
• (twelve) Oxygen diffusers. Point Four Brand, two (2) diffusers per line.
• (Six) Aerator holes with plug, three (3) per compartment.
• (Six) Model TT fresh flow Aerators.
o Includes de-sta-co latches and cover, three (3) per compartment
• (Two) 2” screened overflow drains, one (1) per compartment
• (Two) Holes for dissolved oxygen probe. Probe not included
• (Six) Lift points, three (3) per side.
• (Seven) Bolt down heavy angles on each side of tank
• Enclosed electrical control box
• (Six) Illuminated toggle switches. All wiring run in flexible conduit
• (One) electrical outlet by each aerator.
• Green ribbed oxygen hose from flow meter to oxygen diffusers enclosed in tube.
• Brackets to hold diffusers in place.
• (One) 2” screened ball drain valve per tank.
• (Six) Place oxygen flow meter
• D-tube hand railing across rear only.
Truck Bed Specifications for Live Fish Haul Tank Saratoga National Fish Hatchery
• (One) Recessed sight tube per compartment. Driver side.
• (One) 4” brass screened gate valve between tanks. Passenger side. Used to flush front tank.
File details come from the government source that posted it. Updated .