Specifications_Double_Auger_Snow_Blower.pdf
PDF 423 KB Posted
- Attached to
- FWS MN DOUBLE AUGER SNOW BLOWER Federal contract opportunity
- Solicitation number
- 140FS224Q0008
About this file
This document outlines specifications for a double auger snow blower solicitation issued by the Tamarac National Wildlife Refuge. The Refuge requires a double auger snow blower compatible with a John Deere 333G Compact Track Loader that has direct drive 6000 class motors producing 60 GPM and 4500 PSI, a 36" intake height with 29" deep dish four blade fan, two 84" width augers that are 3/4" thick and heavily gusseted with tight spirals, greaseable bearings on both augers, four skid shoes for adjustability and float, a hydraulic chute and deflector with poly gasket and easy flow design to prevent freezing and allow for longer casting distances at high snow volumes. Additional requirements include a heavily reinforced frame, powder coat finish for corrosion resistance, and protected hydraulics, solenoids and hoses routing. The completed snow blower must be delivered to the USFWS Tamarac NWR located at 35704 County Highway 26, Rochert, MN 56578-9638. The related solicitation is numbered 140FS224Q0008 for the FWS MN Double Auger Snow Blower opportunity issued by the Department of the Interior Fish and Wildlife Service.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140FS224Q0008.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
140FS224Q0008 Double Auger Snow Blower Tamarac National Wildlife Refuge
Specifications for Double Auger Snow Blower
The Tamarac National Wildlife Refuge has a requirement for a double auger snow blower that has high flow and direct drive motors. This double auger snow blower needs to be compatible with a John Deere
333G Compact Track Loader.
Minimum specifications:
Direct drive 6000 class motor fan with 60 GPM and 4500 psi output
The intake should be 36” in height with a 29” deep dish four blade fan
Two 84”width augers of ¼” thick, heavily gusseted, tight spiral snow augers
Greaseable bearings on both augers
4 skid shoes (2 side runners – 2 rear shoes) for adjustability and float
Hydraulic chute and deflector with poly gasket no freeze and easy flow chute for longer casting distances and high snow volume output without freezing
Heavily reinforced frame and components are required
Snow blower must have a powder coat finish for corrosion resistance
Protected hydraulics, solenoids, and hoses routing
Deliver to USFWS Tamarac NWR, 35704 County Highway 26, Rochert, MN 56578-9638
File details come from the government source that posted it. Updated .