Specifications.pdf

PDF 19 KB Posted

Attached to
Open Cell Foam Joint System
Solicitation number
300000297578597
Issued by
Missouri

About this file

This is a specifications document for Section 1073 - Joint Material for Structures, specifically detailing requirements for an open cell foam joint system for bridge construction. The specifications establish comprehensive technical requirements for a single-manufacturer joint system comprising three primary components: cellular polyurethane foam impregnated with hydrophobic polymer and factory-coated with highway-grade, fuel-resistant silicone; field-applied epoxy adhesive primer; and field-applied silicone sealant bands to seal gaps and lock field splices. The seal system must achieve a working range of 50% in tension and 50% in compression, with factory-fabricated watertight transition assemblies for changes in plane and direction.

The joint system components must meet specific performance standards including a temperature service range of -40°F to 185°F per ASTM C 711, zero bleeding at 180°F under 50% compression for three hours, and no UV changes at 2000 hours per ASTM G 155. The epoxy adhesive shall be a 100% solids, two-component moisture-sensitive modified epoxy meeting ASTM C 881, while the silicone sealant must be a one-part, cold-applied chemically curing sealant conforming to ASTM D 5893. A pricing table is provided indicating various universal 90-degree joint configurations with depths ranging from 1 inch to 4 inches, supplied in 12-linear-foot reels or 6.56-linear-foot sticks, though specific unit prices and product codes are not completed in the submitted document.

View the file

Other files

File Type Posted
MODOT SL 0000000092SL_SUPPLIER.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Section 1073 - Joint Material for Structures

1073.6 Open Cell Foam Joint System. All components of the system shall be supplied by one manufacturer.

The joint system shall be comprised of the following components.

(a) Cellular polyurethane foam impregnated with 100% hydrophobic polymer, water based emulsion and factory coated, on the roadway surface, with highway-grade, fuel resistant silicone.

(b) Field-applied epoxy adhesive primer.

(c) Field-applied silicone sealant bands that seal the gap between the edge of the bridge and the silicone topping on the joint. This silicone will also be used for locking field splices in the joint together.

1073.6.1 General Movement Requirements. The seal shall have a working range of 50% in tension and 50% in compression. Changes in plane and direction shall be executed using factory fabricated watertight transition assemblies conforming to the plans and specifications.

1073.6.2 Seal Properties. The seal shall be able to meet the following properties:

Property Requirement Temperature Service Range, ASTM C 711 -40° F to 185° F Bleeding None at 180° F @ 50% compression for 3 hrs.

UV Resistance, ASTM G 155 No Changes at 2000 hrs.

Polymer impregnation agent Free of any waxes or asphalts

1073.6.3 Adhesive Properties. The epoxy adhesive shall be a 100% solids, two component moisture sensitive modified epoxy adhesive which meets ASTM C 881.

1073.6.4 Sealant Properties. The silicone sealant shall be a one part, cold applied chemically curing silicone joint sealant which meets ASTM D 5893.

Pricing:

Supplied Length Product Code Joint at MeanT Depth of Seal Price/LF Univ. 90’s

12 LF Reel ________ ½” 1 ¾” ______ ______ ________ 1” 1 ¾” ______ ______ ________ 1 ¼” 2” ______ ______

6.56 LF sticks ________ 1 ½” 2 ½” ______ ______

________ 2” 2 ½” ______ ______ ________ 2 ½” 2 ¾” ______ ______ ________ 3” 2 ¾” ______ ______ ________ 3 ½” 3 ½” ______ ______ ________ 4” 3 ½” ______ ______

File details come from the government source that posted it. Updated .