SPECIFICATIONS.pdf
PDF 94 KB Posted
- Solicitation number
- W911SD26Q123
About this file
This document contains specifications for a 4-wheel drive diesel utility vehicle with dump body and debris blower equipment.
The primary deliverable is one (1) Kubota 4WD diesel utility vehicle with ROPS-certified hard cab, fully assembled, operational, and serviced. Required accessories include cab door kit, washer bottle kit, door-mounted mirror kit, beacon light, LED work light kit, HD series signal light kit, interior mirror, horn kit, cab heater, 2-inch receiver hitch kit, Toro Pro Force debris blower, and miscellaneous bed-mount parts and materials. Two complete operator's, service, and parts manuals must be provided.
Engine specifications require a rear-positioned 3-cylinder, inline vertical, 4-cycle, liquid-cooled 898cc diesel engine producing 23.3 horsepower at 3600 RPM, EPA Tier IV compliant, with 12-volt 540 CCA battery and 60-amp alternator. The transmission must feature rear transaxle with twin axle drive, 3-speed synchromesh H-shift pattern with high/low range (6F/2R speeds), manual differential lock, and automatic on-demand 4WD with center differential. Additional powertrain requirements include 7.5-inch clutch and pressure plate; 4-wheel 9.5-inch disk hydraulic brakes with twin piston calipers; fuel, coolant temperature, hour meter, oil pressure, and battery charge gauges; and tachometer/speedometer.
Suspension, steering, and hydraulic systems must include independent A-frame front suspension with dual coil springs and shock absorbers; independent rear axle with leaf springs; power-assisted 4-position tilt steering wheel with 70-degree front wheel steer and 32-inch inside turning radius; and hydraulic system with lift control valve, quick disconnects for dual lift cylinders, three-position valve with spring return, and 100-mesh minimum strainer. The hard cab requires steel and glass construction with ROPS, vented windshield, interior dome light, 2-speed wipers, hot water heater, and solid door configuration with sliding glass operator window. Safety features include twin halogen headlights, dual taillights, rear stop lamps, horn, turn signals, clutch pedal interlock, tow hitch, and rear wheel fenders; OSHA-certified 2-post ROPS meeting SAE J2258 and ISO/DIS 21299 standards.
The tow hitch must be formed steel bolted to rear with capacity for 600-pound maximum tongue weight and 3,500-pound maximum trailer weight. The debris blower shall be bed-mounted only, featuring twin-cylinder 27-horsepower air-cooled gas engine with 12-volt electric start and 5-gallon fuel tank. The blower must be axial flow design turbine with 90-degree round discharge chute on 360-degree swivel, remotely controlled by electric motor with gear reduction and belt drive. Two handheld wireless RF remote controls must operate engine start/stop, RPM adjustment, and 360-degree chute rotation in both directions. A poly 90-degree nozzle must be supplied.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATIONS
Item Quantity
4WD Diesel (Kubota ) ROPS Certified Cab
Cab Door Kit 1
Washer Bottle Kit 1
Door Mounted Mirror Kit 1
Beacon Light 1
LED Work light Kit 1
HD Series Signal Light Kit 1
Interior Mirror 1
Horn Kit 1
Cab Heater 1
2 Inch Receiver Hitch Kit 1
Toro Pro Force Debris Blower 1
Miscellaneous parts and materials for bed mount
Utility Vehicle 4Wheel Drive with Dump Body and Debris Blower
Equipment shall be furnished fully assembled, operational, and serviced.
Two- Operators, Service, and Parts manuals for Utility Vehicle must be supplied.
Engine: Must be a rear-positioned 3 cylinder, inline vertical, 4 cycle, and liquid cooled
898 cc diesel engine. 23.3 hp governed to a speed of 3600 RPM. Must be direct coupled to transaxle with a 12 volt, 540 CCA battery and 60 amp alternator. Electronic fuel pump, 4.5-gallon fuel capacity, 2 stage air cleaner and a radiator with removable screen constructed of aluminum with 10 fins/ inch dual pass. Thermally controlled with
DC electric cooling fan. Engine must meet EPA Tier IV compliance.
Transmission: Rear transaxle is to be connected directly to engine with twin axle drive.
3 speed synchromesh, H shift pattern with high/low range providing 6F/2R speeds. Must have a manual differential lock. The four wheel drive shall be automatic, on demand with center differential to prevent scuffing during turning, operational in forward and reverse. 7.5" clutch and pressure plate.
Gauges: Must include fuel, coolant temperature, hour meter, oil pressure, glow plug and battery charge indicator lights. Tachometer/speedometer.
Brakes: Minimum shall be 4 wheel 9.5” disk with hydraulic service brakes using twin piston fix mount calipers. Parking brake uses mechanical cable actuated caliper on rear wheels.
Suspension: Front should be Independent A frame control arm, dual coil springs, and dual shock absorbers with anti sway bar and a steel space frame front frame. Rear should be a weight carrying axle that is independent of the transaxle, with leaf springs and dual shock absorbers. A heavy duty C channel rear frame is required.
Steering: Must be power assist with a 4 position tilt steering wheel. Front wheels shall steer 70 degrees for optimum maneuverability with an inside turning radius 32".
Hydraulics: Hydraulic system should provide hydraulic flow for power steering and lift in series. A lift control valve with quick disconnects for dual lift cylinders or for attachments when quick disconnects are switched is required. A three position hydraulic valve with spring return to neutral and ball checks to maintain load is required. System shall have a spin on hydraulic oil filter, with 100 mesh strainer minimum.
Hard Cab: Should be of steel and glass construction and include ROPS. Also required are vented front glass windshield, interior dome light, 2 speed windshield wiper, hot water heater, solid door kit (operator door has sliding glass window, passenger door is solid), interior rear-view mirror, and exterior mirrors and beacon (Strobe) kit.
Safety and Lighting: Must have twin halogen headlights and dual taillights, rear stop lamps, horn, turn signals, clutch pedal safety interlock switch, tow hitch, and rear wheel fenders. OSHA-certified 2-post ROPS. Certified to meet SAE J2258. Certified to meet
ISO/DIS 21299 for ROPS.
Tow Hitch: Formed steel hitch bracket bolted to rear. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight 600 lbs. Maximum trailer weight 3,500 lbs.
Debris Blower: Bed Mounted only. Must have a twin cylinder 27 hp, air-cooled gas engine minimum. Include a 12-volt electric start, 5 gallon fuel tank. Blower must be an axial flow design turbine. The turbine is a stand-alone unit. The 90-degree round discharge chute must be on a 360-degree swivel. The chute must be rotated by remote control through an electric motor with gear reduction to a belt drive on the swivel. Poly
90° nozzle must be supplied. Two hand- held wireless RF remote controls of engine start/ stop, RPM and 360° chute rotation in either direction is required.
File details come from the government source that posted it. Updated .