Specifications.pdf
PDF 132 KB Posted
- Attached to
- AFS FUEL BLADDERS Federal contract opportunity
- Solicitation number
- 140L0225Q0003
About this file
This is a technical specifications document detailing requirements for three sizes of military-grade fuel bladders (500, 1,000, and 2,000 gallon capacities) and associated berms for the Department of the Interior Bureau of Land Management Alaska Region.
The fuel bladders share common features including 3" overlap welds, two 2" capped Camlocks for fill/discharge, one 2" capped Camlock for vent, vented spark arrestor, and 180 Mil reinforced corners. The 500-gallon bladder requires 40 oz. Mil spec Grade "A" fuel fabric with 80 Mil reinforcement patches and 120 mil abrasion patches, while the 1,000 and 2,000-gallon versions use 30 mil fabric with 60 Mil reinforcement patches and 90 mil abrasion patches. All units include serial numbering, military-style emergency repair kits with clamps, and operation manuals. The berms are constructed with polyester 1,000 Den base fabric (8.1 Oz/yd), have a total weight of 29.5 Oz/yd, and meet specific strength requirements including breaking strength strip ASTM D 751 440/415 lbs/inch, breaking strength grab of 600 Lbs, and can withstand cold crack/bend at -41 degrees F.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B08_Combined_Synopsis_and_Solicitation.docx | DOCX document | |
| Sol_140L0225Q0003.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fuel Bladder / Berm specifications.
500 Gallon Fuel Bladder
Constructed of 40 0z. Mil spec Grade “A” fuel Fabric
3” overlaps weld
2- 2” Capped off Camlock for fill/discharge.
1- 2” Capped off Camlock for vent.
1 Vented Spark arrestor.
All Ready Fuel Bladders meet the minimum below specs.
All fittings are placed through 80 Mil reinforcement patches.
Opposite all fittings are 120 mil abrasion patches to protect tank inside and out.
180 Mil reinforced corner.
Each tank will be serial numbered for inventory and warranty purpose.
Tanks will include military style emergency repair kit with clamps.
Operation manual
1,000 Gallon Ready Flexible Fuel Bladders
Constructed of 30 mil. Mil spec Grade “A” fuel Fabric
3” overlaps weld
2- 2” Capped off Camlock for fill/discharge.
1- 2” Capped off Camlock for vent.
1 Vented Spark arrestor.
All Ready Fuel Bladders meet the minimum below specs.
All fittings are placed through 60 Mil reinforcement patches.
Opposite all fittings are 90 mil abrasion patches to protect tank inside and out.
180 Mil reinforced corner.
Each tank will be serial numbered for inventory and warranty purpose.
Tanks will include military style emergency repair kit with clamps.
Operation manual
2,000 Gallon Fuel Bladders mlstewart Reviewed
Constructed of 30 mil. Mil spec Grade “A” fuel Fabric
3” overlaps weld
2- 2” Capped off Camlock for fill/discharge.
1- 2” Capped off Camlock for vent.
1 Vented Spark arrestor.
All Ready Fuel Bladders meet the minimum below specs.
All fittings are placed through 60 Mil reinforcement patches.
Opposite all fittings are 90 mil abrasion patches to protect tank inside and out.
180 Mil reinforced corner.
Each tank will be serial numbered for inventory and warranty purpose.
Tanks will include military style emergency repair kit with clamps.
Operation manual
Berms
Base Fabric, Polyester 1,000 Den 8.1 Oz/yd
Total Weight 29.5 Oz/yd
Breaking Strength Strip ASTM D 751 440 / 415 lbs/inch
Breaking Strength Grab ASTM D 751 600 Lbs
Tear Strength 77 / 55 lbs
Coating Adhesion (RF Welding) 22 Lbs
Blocking Resistance #1
Cold Crack / Bend -41 degrees F
File details come from the government source that posted it. Updated .