Specifications.docx
DOCX document 16 KB Posted
- Attached to
- Tank Lids
- Solicitation number
- 12305B23Q0187
About this file
This document outlines specifications for a federal contract to provide Parr tank lid inserts. The United States Department of Agriculture Agricultural Research Service requires 220 durable, washable, and removable lid inserts made of ABS plastic 0.1 to 0.15 inches thick to fit onto existing fiberglass tank covers at its National Cold Water Marine Aquaculture Center. The lid inserts must be 12.5 inches tall with 12 inches sitting atop the covers and 0.5 inches below, angled slightly inward at the center, and include a flange no more than 1 inch wide to support the lid. The opening diameter is 20.25 inches with a 12.5 inch radius. Delivery is required FOB to the National Cold Water Marine Aquaculture Center located at 25 Salmon Farm Road in Franklin, Maine 04634. The associated federal contract opportunity was posted as solicitation number 12305B23Q0187 by the USDA ARS Field Research Implementation and Information Delivery Northeast Area.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Lid overhead 2.jpg | JPG image | |
| Lid Overhead 1.jpg | JPG image | |
| Questions and Answers for SAM.docx | DOCX document | |
| Contract Terms and Conditions.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for Parr Tank Lid Inserts
Title: Parr Tank Lid Inserts
Background:
USDA. ARS National Cold Water Marine Aquaculture requires new Parr room tank lid inserts to prevent salmon from jumping out and allowing the feed to pass through unobstructed to the fish in the tanks. The lid inserts must be durable, washable, and removable from the current tank lids.
Salient Characteristics:
1. Two-hundred and twenty lid inserts are required.
2. Tank lid inserts must sit on top of the current fiberglass covers.
3. Tank lid inserts must be made with general purpose black Acrylonitrile Butadiene Styrene (ABS) that are light enough for easy moving and cleaning, desired range 0.1” – 0.15” in thickness.
4. Lids must be 12.5 inches tall with 12 inches on top of the cover and 0.5 inches below the cover.
5. The lid must be slightly angled in toward the center.
6. A flange must support the lid on the cover (no more than 1 inch wide)
7. The diameter of the cover opening is 20.25 inches with a radius 12.5 inches.
8. Must include FOB destination shipping.
Delivery Address:
National Cold Water Marine Aquaculture Center 25 Salmon Farm Road Franklin, ME 04634
File details come from the government source that posted it. Updated .