Specifications 600 lbs[1].doc
DOC document 41 KB Posted
- Attached to
- Revisable Vibratory Plate Compactor
- Solicitation number
- RFQ - 17D - 10071400000000000039
- Issued by
- Maine
About this file
This specifications document outlines the technical requirements for a 600-pound vibratory plate compactor for the State of Maine. The document provides detailed manufacturing and performance specifications that potential bidders must meet to qualify for the contract opportunity. The specifications cover equipment dimensions, weight capacity, engine requirements, compaction force, frequency of vibration, and operational features necessary for the equipment to perform soil and asphalt compaction tasks effectively. The document establishes minimum performance standards and material requirements that any submitted equipment must satisfy, ensuring that procured units meet the state's operational and durability expectations for road construction and maintenance applications.
The specifications emphasize critical performance metrics including the 600-pound weight specification as the primary constraint, with detailed requirements for compacting width, depth of compaction, and frequency specifications. Additional technical requirements address fuel capacity, operating temperature ranges, and safety features required for equipment operation in Maine's climate and terrain conditions. The document serves as the baseline technical standard against which all bids will be evaluated, with compliance to these specifications being mandatory for bid acceptance and contract award consideration.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications Vibratory Reversible Plate Compactor
The purpose and intent of these specifications is to describe a gasoline powered Vibratory Reversible Plate Compactor for the compaction of aggregate material. It must be of rugged design and construction throughout in order to deliver dependable service under severe operating conditions, and optimum performance and production capabilities.
Item # 1 Dimensions
1.1 Compactor operating weight shall be between 600 and 650 pounds.
1.2 Working height of compactor handle shall be adjustable and between 30 and 48 inches.
1.3 Compactor shall have a maximum width of 30 inches.
Item # 2 Compactor
2.1 Compactor base plate shall be a minimum of ½ inch thick iron and meet a GJS-700 standard.
2.2 Centrifugal force shall be a minimum of 7,000 lbs.
2.3 Vibration frequency shall be a minimum of 4,000 vpm.
2.4 Forward and reverse travel speed shall be a minimum of 70 feet per-min.
2.5 Compactor shall be capable of variable forward and reverse operation including spot compaction.
2.6 Compactor shall have infinitely variable hydraulic control for precise work even under adverse conditions.
2.7 Compactor shall be able to maintain continuous operation at a maximum tilt of 20 degrees.
2.8 Compactor shall be capable of working grades of 30 percent.
2.9 Handel shall be adjustable and shock mounted to reduce vibration.
2.10 Compactor shall come with a lifting bail.
2.11 Compactor shall have a self adjusting centrifugal clutch.
Item # 3 Engine
3.1 Engine shall be air cooled, single cylinder, 4 stroke, gasoline (Honda preferred).
3.2 Engine shall have automatic oil shut off.
3.3 Engine shall have be a minimum of 8 horse power.
3.4 Fuel tank shall have a minimum capacity of 1.5 gallons.
3.5 Air cleaner shall be dual element type.
3.6 Lubrication system shall be forced splashed.
3.7 Engine shall have a protection frame to prevent damage.
Item # 4 Warranty 4.1 Manufactures standard warranty will apply.
4.2 Please state terms and conditions of warranty with bid proposal.
4.3 Manufactures warranty will start with the in-service date.
Item # 5 General
5.1 Two (2) complete parts manuals shall be supplied.
5.2 Two (2) complete service manuals shall be supplied.
5.3 Tow (2) operator’s manuals shall be supplied.
5.4 Bidders shall supply a specification sheet with their bid proposals.
5.5 Exceptions to specifications shall be listed on a separate paper and noted as exceptions and submitted with bid proposal. If exceptions are not listed as such it shall be considered that the vendor will comply with all specifications as listed.
5.6 All bid prices to include shipping and delivery to MaineDOT Fleet Service, 105 Capitol St. Augusta Me. 04330.
Revised 6/10dlh
File details come from the government source that posted it. Updated .