Specification Sheet.docx
DOCX document 17 KB Posted
- Attached to
- BOX COMPRESSION TESTER Federal contract opportunity
- Solicitation number
- 12444823Q0041
- Issued by
- Department of Agriculture Forest Service
About this file
This document provides specifications for a box compression tester being solicited by the Department of Agriculture Forest Service. The tester must be capable of satisfying TAPPI and ASTM standards for compression testing. It must have a minimum of three load cells for force measurement, a rolling chassis, maximum dimensions of 2.7 meters in height and a 1.2 by 1.2 meter minimum platen size. Additional requirements include test speeds from 2 to 120 mm/min, minimum column spacing of one meter, fixed and floating platen capability controlled by a single operator, parallel platen adjustment, computer control and data acquisition software compatible with Windows 10, and a 12-month warranty. The related federal contract opportunity has solicitation number 12444823Q0041 to procure this box compression tester for the Department of Agriculture Forest Service.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_12444823Q0041.pdf | ||
| Statement of Work Template 2020-11-29.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specification Sheet for Equipment If you also have pictures of item(s) you can place them here along with the equipment specifications. These can usually be found on websites as you do your market research
Specifications for Box Compression Tester
· Capable of satisfying requirements in TAPPI Standard T804 and ASTM Standard D642
· Power: 110 VAC or 220 VAC 3-Phase
· Minimum number of load cells used for force measurement: 3
· Rolling chassis
· Maximum machine height of 2.7 m
· Maximum Force: 80kN
· Minimum force resolution: 0.1 N
· Minimum platen size: 1.2 m x 1.2 m
· Minimum platen opening: 1.2 m
· Capable of test speeds from 2 mm/min to 120 mm/min
· Speed accuracy: ±1%
· Minimum support columns: 4
· Minimum column spacing: 1 m
· Moveable platen must incorporate 4 matched drive screws
· Have fixed and floating platen capability; changing from one to the other must be single operator operation
· Parallel platen adjustment/check capability
· Computer and software for equipment control and data acquisition
· External voltage or digital output for load & displacements for acquisition for another computer
· Signal conditioning for at least 3 external devices (±10V control), e.g., LVDTs and ability to read conditioned output signal from external computer
· Platen position control resolution to 0.1% of reading after zeroing
· Motor braking system for accurate motor control
· Must include safety systems for:
· Overload protection
· Upper & lower limits
· Rapid travel
· Computer software and controller running Windows 10 or later
· Fully customized and programmable
· Ability to create and store multiple test protocols and templates
· Calibration of each channel (displacement, load, LVDTs)
· Static and multi-step programming, e.g., go to load and hold for time period, followed by another load sequence (load or unload)
· Available closed loop control on any channel
· Data acquisition customization and exportation
· Event programming with parallel branches for execution and logical operators (if/then, while, etc.)
· Limit sensing, sequencing triggers and interface to digital I/O
· Meters (can be in software) showing current, min-max, command output and cycle counters
· Data reduction options for real-time data logging
· User selectable units: SI, metric, US, Imperial
· Must allow calibration by outside metrology vendors
· 12-month warranty including all software and firmware upgrades during warranty period at no additional charge
File details come from the government source that posted it. Updated .