Special Packaging Instructions (SPI).pdf
PDF 124 KB Posted
- Solicitation number
- W912CH-24-R-0184
- Issued by
-
Department of the Army
About this file
This is a Special Packaging Instruction (DD Form 2169) for a Display, Gunner's (GD) with part number 13022787 and NSN 6625-01-609-2815. The document provides detailed preservation and packaging requirements for the item, which weighs 3.3 lbs and has dimensions of 6.5 x 5.7 x 2.4 inches.
The packaging instructions specify MIL-STD-2073-1 Method 41 for military preservation, requiring Class 2 cushioning material (A-A-59135), Type I Class F bag (MIL-DTL-117), and a Type II container (PPP-B-1672) with Fast Pack Code XC4. Special handling instructions include capping or wrapping the connector with protective materials before bagging, and using a container with internal dimensions of 9.0 x 6.0 x 3.5 inches. The unit pack weighs 4.3 lbs and has dimensions of 9.3 x 6.3 x 4.0 cubic feet, with a volume of 0.136 cubic feet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 13022787-EH2C0303EH.zip | ZIP file | |
| W912CH24R0184.pdf | ||
| Engineering Exceptions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
13022787 DISPLAY, GUNNER’S (GD) 19200 AM13022787
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
6625-01-609-2815 220316 A / L22K2027
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 4.3 0.136 9.3 X 6.3 X 4.0
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR CUSHIONING: A-A-59135, CLASS 2 (SEE NOTE A)
MIL-STD-2073-1, METHOD 41 2 1 BAG: MIL-DTL-117, TYPE I, CLASS F
13. CLEANING 3 1 CONTAINER: PPP-B-1672, TYPE II,
* FAST PACK CODE: XC4, NSN: 8115-00-101-7638
14. DRYING (SEE NOTE B)
* 4 AR CLOSURE: PPP-B-1672
15. PACKING
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. PRIOR TO BAGGING, CAP THE CONNECTOR OF THE DISPLAY, GUNNER’S (GD) WITH A PROTECTIVE CAP AS SPECIFIED AND DIRECTED IN THE ITEM DRAWING. IF NO CAPS ARE PROVIDED, WRAP THE CONNECTOR IN ONE LAYER OF A-A-59135 AND SECURE WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M. DO NOT ALLOW TAPE
TO COME INTO CONTACT WITH THE CONNECTOR OR THE DISPLAY, GUNNER’S (GD).
B. THE CONTAINER SHALL HAVE INTERNAL DIMENSIONS OF 9.0 X 6.0 X 3.5 INCHES.
WSC: GK ITEM SIZE: 6.5 X 5.7 X 2.4 ITEM WEIGHT: 3.3 APPROVED: NELSON OLIVEIRA
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages
File details come from the government source that posted it. Updated .