Special Packaging Instructions AK16186603.pdf
PDF 178 KB Posted
- Attached to
- Pump Unit, Hydraulic Federal contract opportunity
- Solicitation number
- SPRDL1-24-R-0068
About this file
This document is a Special Packaging Instruction (SPI) for a Pump Unit, Hydraulic with National Stock Number 4320-01-618-6603. It specifies the detailed packaging requirements for this item, including cleaning, drying, packing, marking, and required materials such as cushions, barrier bags, gaskets, and blocking. The document also includes drawings and a bill of materials for the blocking required.
The related federal contract opportunity is a 5-year Indefinite Delivery/Indefinite Quantity (IDIQ) solicitation (SPRDL1-24-R-0068) for the same Pump Unit, Hydraulic, with a quantity range of 78 to 1,950 units. This procurement is restricted to approved sources or distributors and may utilize a reverse auction pricing technique. The Defense Logistics Agency Land and Maritime is the procuring agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation No. SPRDL1-24-R-0068.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO.
03H14A-HYD/S1 (25567) PUMP UNIT, HYDRAULIC
2. CAGE
19207
3. SPI NO.
AK16186603
4. NATIONAL STOCK NO.
4320-01-618-6603
5. DATE
04-06-2015
6. REVISION
7. QUP
8. ICQ
NONE
9. UNIT PACK WT.
114.0
10. UNIT PACK CU
5.740
11. UNIT PACK SIZE (INCHES)
26.0 x 17.5 x 21.8
12. MILITARY PRESERVATION
MIL-STD-2073-1E, METHOD 43
18.
STEPS
19.
REQD
20.
DESCRIPTION
13. CLEANING
MIL-STD-2073-1E
1-B A/R CAPS/PLUGS: NAS-847
2-C 1 CUSHION: PPP-C-1797, TY I, ¼” TH, SIZE: 72” X 40”
14. DRYING
MIL-STD-2073-1E
3-D 1 BARRIER BAG: MIL-DTL-6060, SIZE 67” X 48”
4-D 1 GASKET: ASTM-D2000, SIZE: 12“ X 5” X 1/16” (MIN)
15. PACKING 1 GASKET: ASTM-D2000, SIZE: 12” X 7” X 1/16” (MIN)
5-E 1 BLOCKING: ASTM-D6199, SIZE: 3 ½” X 3 ½ X 11”
a. LEVEL A
MIL-STD-2073-1E AND NOTE H
6-G 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST A,
SIZE: 25” X 14” X 17” I.D.
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE I
17. NOTES/DRAWING
A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1E AND THE
APPLICABLE CONTAINER SPECIFICATION.
B. SEAL OPENINGS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.
C. WRAP THE ITEM TO PROTECT BARRIER FROM SHARP EDGES. TAPE IN PLACE.
D. PROVIDE WATERVAPORPROOF PROTECTION TO ITEM IN ACCORDANCE WITH MIL-STD-2073-1E AND MIL-
DTL-6060. BARRIER GASKET MATERIAL WILL COVER ALL BLOCKING AND ITEM CONTACT POINTS WITH BASE, AND EXTEND AN ADDITIONAL ½ INCH TO EACH SIDE. THE INTENT IS TO ENSURE THE BARRIER BAG
IS NOT PINCHED OR RUBBED BY THE BLOCKING MEMBERS.
E. LUMBER SIZES ARE NOMINAL UNLESS SPECIFIED, SEE PAGES 2-3 FOR BLOCKING SIZES AND
ORIENTATION.
F. SEE PAGE 3 FOR CONTAINER MODIFICATIONS AND ASSEMBLY.
G. CLOSE CONTAINER ACCORDING TO ASTM D3953.
H. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
I. THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ALL FOUR SIDES WITH MINIMUM ½ INCH HIGH
BLACK LETTERS "REUSABLE CONTAINER, DO NOT DESTROY."
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 3 Pages
-TL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO.
03H14A-HYD/S1 (25567) PUMP UNIT, HYDRAULIC
2. CAGE
19207
3. SPI NO.
AK16186603
4. NATIONAL STOCK NO.
4320-01-618-6603
5. DATE
04-06-2015
6. REVISION
17. NOTES/DRAWING
ALL DIMENSIONS ARE IN INCHES.
1. FABRICATE BLOCKING ITEM #1 AS SHOWN BELOW. CARRIAGE BOLTS (ITEMS #2 AND #3) ARE MOUNTED THROUGH THE UNIT CONTAINER BOTTOM PRIOR TO INSERTING BARRIER BAG, BLOCKING
ITEM #1, AND ITEM, AS ILLUSTRATED ON PAGE 3.
BLOCKING DETAIL:
BILL OF MATERIAL
ITEM SIZE QTY DESCRIPTION REFERENCE
1 4 X 4 X 11 1 ASTM-D6199 SEE BELOW
2 3/8 DIA X 9”
HARDWARE SET
2 HARDWARE SET CONSISTS OF:
1PC 3/8 X 9 CARRAGE BOLT, 1PC 3/8
FLAT WASHER, 1PC 3/8 LOCK
WASHER, AND 1PC 3/8 NUT
SEE BELOW
3 3/8 DIA X 5 ½”
HARDWARE SET
4 HARDWARE SET CONSISTS OF:
1PC 3/8 X 5 ½ CARRAGE BOLT, 1PC
3/8 FLAT WASHER, 1PC 3/8 LOCK
WASHER, AND 1PC 3/8 NUT
SEE BELOW
FIGURE 1
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO.
03H14A-HYD/S1 (25567) PUMP UNIT, HYDRAULIC
2. CAGE
19207
3. SPI NO.
AK16186603
4. NATIONAL STOCK NO.
4320-01-618-6603
5. DATE
04-06-2015
6. REVISION
CONTAINER MODIFICATIONS AND ASSEMBLY:
1. 2” X 4” X 25” RUBBING STRIPS
2. ALL CARRIAGE BOLT HEADS PROTRUDING OUT THE BOTTOM OF THE RUBBING STRIPS SHALL BE
COUNTERSUNK 1” IN DIAMETER X ¼” DEEP.
FIGURE 2
FIGURE 3
DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages
GASKETS ON TOP
AND BOTTOM OF
BARRIER
File details come from the government source that posted it. Updated .