Special Packaging Instruction - AK15985027.pdf
PDF 189 KB Posted
- Attached to
- Generator, Engine Accessory
- Solicitation number
- SPRDL1-24-R-0188
About this file
This is a DD Form 2169, Special Packaging Instruction document for a 400 Amp Dual Voltage Alternator Assembly (National Stock Number 2920-01-598-5027). The document specifies detailed packaging and preservation requirements for this military electrical component, dated February 12, 2025, with revision level B.
The packaging instructions mandate preservation using MIL-PRF-32033 applied to the shaft exterior, followed by wrapping with MIL-PRF-121 Type II material secured with tape. Cushioning must be fabricated according to MIL-PRF-26514 Type I specifications using four pads (labeled A, B, C, and D) with precise dimensions detailed in technical drawings, with pads A-B and C-D adhered together using waterproof adhesive. The item must be placed in a primary container (ASTM-D 5118, Type CF, Class DOM, 15-7/8" x 13-3/8" x 22-1/4"), then in a secondary protective bag (MIL-DTL-117 Type II), followed by an outer container (ASTM-D 5118, Type CF, Class WR, 16-3/8" x 13-7/8" x 23-1/2"), and finally in a reusable overpack shipping container (ASTM-D 6880, Class 2, 16-7/8" x 14-3/8" x 24-3/8"). All preservation, cleaning, and drying procedures must comply with MIL-STD-2073-1 Method 42, with marking per MIL-STD-129. The unit pack weight is 164.0 pounds with cubic dimensions of 5.200 cubic feet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL124R0188.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1. PART OR DRAWING NO./CAGE/NOMENCLATURE ALTERNATOR
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
4. NATIONAL STOCK NO.
7. QUP
2. CAGE
5. DATE
10. UNIT PACK CU8. ICQ 9. UNIT PACK WT.
3. SPI NO.
6. REVISION
11. UNIT PACK SIZE
12. MILITARY PRESERVATION
13. CLEANING
14. DRYING
15. PACKING
a. LEVEL A
b. LEVEL B
16. MARKING
MIL-STD-2073-1, METHOD 42
MIL-STD-2073-1
MIL-STD-2073-1
MIL-STD-2073-1 AND NOTE H
NOT APPLICABLE
MIL-STD-129 AND NOTE G
18. 19. 20.
STEPS REQD DESCRIPTION
12518691 19207 ASSEMBLY, 400 AMP DUAL VOLTAGE 19207 AK15985027
12 FEB 2025
001 NONE 164.0 5.200 28.4 X 19.9 X 15.9
1-B PRESERVATIVE: MIL-PRF-32033.
2-C 4 WRAP: MIL-PRF-121, TYPE II, CL. 2, SIZE: 2-1/2 X 5.
3-D 4 CUSHIONING: MIL-PRF-26514, TYPE I, CL. 1.
4-E 1 CONTAINER: ASTM-D 5118, TYPE CF, CL. DOM, VARIETY SW,
GR. 275, STYLE RSC, SIZE: 15-7/8 X 13-3/8 X 22-1/4.
5 1 BAG: MIL-DTL-117, TYPE II, CL. E, STYLE 1, SIZE: 31 X 40.
6-E 1 CONTAINER: ASTM-D 5118, TYPE CF, CL. WR, GR. V3c, STYLE RSC, SIZE: 16-3/8 X 13-7/8 X 23-1/2.
7-F 1 OVERPACK CONTAINER: ASTM-D 6880, CL. 2, STYLE 4, MOD,
SIZE: 16-7/8 X 14-3/8 X 24-3/8.
17. NOTES/DRAWING
A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1.
B. APPLY PRESERVATIVE ON SHAFT EXTERIOR.
C. PLACE WRAP ON PRESERVED SHAFT. SECURE WRAP USING TAPE.
D. FOR FABRICATION AND PLACEMENT OF CUSHIONING, SEE ILLUSTRATIONS ON PAGES 2 AND 3.
E. CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D 1974, METHOD 2B3.
F. MODIFIED USING ONE-INCH NOMINAL LUMBER EXCEPT FOR SKIDS. SECURE CONTAINER TOP USING SCREWS
FF-S-111 OF THE APPROPRIATE SIZE.
G. CONTAINER SHALL BE MARKED: “REUSABLE CONTAINER – DO NOT DESTROY.”
H. THE OVERPACK CONTAINER SHALL BE THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
–DT
MB
B2920-01-598-5027
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
4. NATIONAL STOCK NO.
2. CAGE
5. DATE
3. SPI NO.
6. REVISION
12518691 19207 ASSEMBLY, 400 AMP DUAL VOLTAGE 19207 AK15985027
12 FEB 2025
NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
2. FABRICATE CUSHIONING PADS “A”, “B”, “C”, AND “D” AS SHOWN BELOW.
3. USING A GOOD WATERPROOF ADHESIVE, ADHERE CUSHIONING PADS “A” AND “B”TOGETHER AS
ILLUSTRATED ON SHEET 3.
4. USING A GOOD WATERPROOF ADHESIVE, ADHERE CUSHIONING PADS “C” AND “D”TOGETHER AS
ILLUSTRATED ON SHEET 3.
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
–DT
B2920-01-598-5027
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
4. NATIONAL STOCK NO.
2. CAGE
5. DATE
3. SPI NO.
6. REVISION
12518691 19207 ASSEMBLY, 400 AMP DUAL VOLTAGE 19207 AK15985027
12 FEB 2025
NOTES:
WRAP ON PRESERVED SHAFT NOT SHOWN.
DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
–DT
2920-01-598-5027 B
File details come from the government source that posted it. Updated .