Special Packaging Instruction - AK14772395.pdf
PDF 662 KB Posted
- Attached to
- Water Quality Analysis Set
- Solicitation number
- SPRDL1-26-R-0049
About this file
This is a DD Form 2169C, Special Packaging Instruction document for the Water Quality Analysis Set (701-WQAS-P), National Stock Number 6630-01-477-2395, dated 4 March 2026, Revision E. The document specifies detailed packaging and preservation requirements for this hazardous material item, which weighs 28.0 pounds, measures 24.3 x 19.5 x 8.8 inches, and has a cubic volume of 2.413 cubic feet.
The packaging instructions mandate compliance with MIL-STD-2073-1 for cleaning, drying, and preservation using Method HM. Level A packing requires wood-cleated panelboard shipping boxes conforming to ASTM-D 6251, Type III, Class 2 or nailed wood boxes conforming to ASTM-D 6880, Class 2. Level B packing allows weather-resistant fiberboard boxes conforming to ASTM D5118 or triplewall corrugated fiberboard boxes conforming to ASTM D5168, with closure and sealing per ASTM D1974. All unit packs and shipping containers must be marked and labeled in accordance with MIL-STD-129 and applicable hazardous material regulations. Hazardous material package testing must follow IATA Dangerous Goods Regulations, IMDG Code, CFR Titles 29, 40, and 49, and interservice publications. Shipments require documentation attesting to test results from performance packaging testing, with the shipper's certification incorporated on DD Form 250 or equivalent acceptance documents. When total shipment quantity to the same destination exceeds 125 pounds, exterior packs without skids must be palletized per MIL-STD-147. All certificates and reports must be available for inspection by authorized government representatives for three years.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL126R0049.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
XFA
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
2. CAGE 3. SPI NO.1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
701-WQAS-P (0AK83) WATER QUALITY ANALYSIS SET 19207 AK14772395
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
6630-01-477-2395 4 MAR 2026 E
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 11. UNIT PACK SIZE (INCHES)
001 NONE 28.0*
10. UNIT PACK CU (CU. FT.)
2.413* 24.3 X 19.5 8.8*
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD HM
13. CLEANING SEE NOTES
MIL-STD-2073-1
14. DRYING
MIL-STD-2073-1
15. PACKING
a. LEVEL A
MIL-STD-2073-1 AND NOTE E
b. LEVEL B
MIL-STD-2073-1 AND NOTE E
16. MARKING
MIL-STD-129 AND NOTE B
17. NOTES/ DRAWING
* WARNING – THIS IS AN ESTIMATED SPI. UNIT PACK WEIGHT, CUBE, AND SIZE ARE ESTIMATED AND INTENDED FOR
INTERNAL GOVERNMENT PLANNING PURPOSES ONLY
A. PACKAGE AND INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKAGING IN ACCORDANCE WITH:
MIL-STD-2073-1, ITEM SDS SHEET, PACKING TM 38-701, AND THE APPLICABLE REGULATION PER MODE OF
TRANSPORTATION IN EFFECT AT TIME OF SHIPMENT BELOW:
• INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) DANGEROUS GOODS REGULATIONS
• INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE
• CODE OF FEDERAL REGULATIONS (CFR) TITLE 29, TITLE 40 AND TITLE 49
• INTERSERVICE PUBLICATIONS AFMAN24-204/TM 38-250/NAVSUP PUB 505/DLAI 4145.3 (FOR MILITARY AIR
SHIPMENTS)
• JOINT MANUAL DLAR 4145.41 “PACKAGING OF HAZARDOUS MATERIAL”
B. ALL UNIT PACKS AND SHIPPING CONTAINERS SHALL BE MARKED AND LABELED IN ACCORDANCE WITH MIL-STD-
129 AND THE APPLICABLE HAZARDOUS MATERIAL REGULATION FOR THE MODE OF SHIPMENT.
C. HAZARDOUS MATERIAL PACKAGE TESTING SHALL BE CONDUCTED AS SPECIFIED BY NOTE “A” REGULATIONS.
D. HAZARDOUS MATERIAL SHIPMENT DOCUMENTATION
ALL SHIPMENTS SHALL BE SUPPORTED BY DOCUMENTATION ATTESTING TO THE DATE AND THE TEST RESULTS
OBTAINED FROM PERFORMANCE PACKAGING TESTING. THE SHIPPER, IF NOT A SELF-CERTIFIER, SHALL BE
RESPONSIBLE FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING PERFORMANCE TESTING SERVICES
ARE, IN FACT, REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION. THE SHIPPER'S SIGNED
CERTIFICATION THAT THE PACKAGED CONFIGURATION MEETS APPLICABLE REQUIREMENTS SHALL BE
INCORPORATED ON THE DD FORM 250, MATERIEL INSPECTION AND RECEIVING REPORT, OR OTHER RELATED
ACCEPTANCE DOCUMENT IF THE DD FORM 250 IS NOT USED. ALL CERTIFICATES AND REPORTS SHALL BE
AVAILABLE FOR INSPECTION BY AUTHORIZED GOVERNMENT REPRESENTATIVES FOR A PERIOD OF THREE
YEARS.
SPECIAL PACKAGING INSTRUCTION
Form Approved
OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
701-WQAS-P (0AK83) WATER QUALITY ANALYSIS SET 19207 AK14772395
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
6630-01-477-2395 4 MAR 2026 E
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
17. NOTES/ DRAWING
E. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH
SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR
PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
File details come from the government source that posted it. Updated .