Special Packaging Instruction - 12927338 - dated 04Mar2024.PDF
PDF 67 KB Posted
- Attached to
- Mine Dispenser Support Panel Federal contract opportunity
- Solicitation number
- SPRDL1-25-R-0043
About this file
This Special Packaging Instruction (SPI) document details packaging requirements for a Support Panel, Mine Dispenser (Part Number 12927338) with two specific variants. The document specifies military-grade packaging instructions following MIL-STD-2073-1 standards, including detailed steps for cushioning, cleaning, drying, container selection, and marking.
The document identifies two part number variants (12927338-1 and 12927338-2) with corresponding National Stock Numbers (1095-01-330-3752 and 1095-01-330-3753), and provides precise packaging guidance including: applying cushioning material to specific panel components, using specific tape and buffer materials, selecting appropriate containers (ASTM D5118/D6251 standards), and ensuring proper closure techniques. The packaging instructions are comprehensive, covering everything from material application to container sealing, with tolerances and quality performance requirements aligned with military specifications.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - SPRDL125R0043.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12927338 SUPPORT, PANEL, MINE DISPENSER 19200 AM12927338
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
(SEE TABLE 1) 240304 - / L24K2086
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 189.0 27.664 74.0 X 38.0 X 17.0
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR CUSHIONING WRAP: A-A-1898, GRADE II,
MIL-STD-2073-1, METHOD 10 CLASS C (SEE NOTE B)
13. CLEANING 2 AR CUSHIONING WRAP: A-A-1898, GRADE II,
* CLASS B (SEE NOTE C)
14. DRYING 3 AR BUFFER: A-A-55057 (SEE NOTE D)
* 4 1 CONTAINER: ASTM D5118/D5118M, TYPE CF,
15. PACKING CLASS WWVR, GRADE V11c, STYLE RSC
a. LEVEL A (SEE NOTE C)
MIL-STD-2073-1 5 1 CONTAINER: ASTM D6251/D6251M, TYPE III,
b. LEVEL B CLASS 2, STYLE I, TREATMENT B
MIL-STD-2073-1 6 AR CLOSURE: ASTM D6251/D6251M
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. THERE ARE TWO (2) VARIATIONS OF THE SUPPORT PANEL, MINE DISPENSER. BOTH VARIANTS SHALL BE PACKAGED IN ACCORDANCE WITH THIS SPECIAL PACKAGING INSTRUCTION. UNIT PACKS SHALL BE MARKED TO REFLECT THE PART NUMBER AND NATIONAL STOCK NUMBER OF THE PACKAGED ITEM. REFER TO TABLE 1 TO
SEE THE NATIONAL STOCK NUMBER ASSOCIATED WITH EITHER VARIANT.
PART NUMBER NATIONAL STOCK NUMBER
12927338-1 1095-01-330-3752
12927338-2 1095-01-330-3753
TABLE 1: SUPPORT PANEL, MINE DISPENSER (VARIANTS)
B. APPLY THE SPECIFIED CUSHIONING MATERIAL TO THE THUMBSCREWS AND TRIANGULAR PROJECTIONS OF THE FEET OF THE SUPPORT PANEL, MINE DISPENSER. SECURE THE CUSHIONING MATERIAL IN PLACE USING TAPE CONFORMING TO ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH THE SUPPORT
PANEL, MINE DISPENSER.
C. CENTER THE SPECIFIED CUSHIONING MATERIAL ON THE HEAD OF THE TRIPOD AND FOLD THE CUSHIONING MATERIAL OVER THE LEGS OF THE SUPPORT PANEL, MINE DISPENSER. SECURE THE CUSHIONING MATERIAL IN PLACE USING TAPE CONFORMING TO ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH
THE SUPPORT PANEL, MINE DISPENSER.
D. PLACE THE PREPARED SUPPORT PANEL, MINE DISPENSER INTO THE CONTAINER SPECIFIED BY STEP 4 OF THIS SPECIAL PACKAGING INSTRUCTION. THE BUFFER MATERIAL SPECIFIED BY STEP 3 OF THIS SPECIAL PACKAGING INSTRUCTION SHALL BE PLACED BETWEEN THE SUPPORT PANEL, MINE DISPENSER’S POINTED TRIPOD TIPS AND THE CONTAINER SPECIFIED BY STEP 4 OF THIS SPECIAL PACKAGING INSTRUCTION. CLOSURE OF THE CONTAINER SPECIFIED BY STEP 4 OF THIS SPECIAL PACKAGING INSTRUCTION SHALL CONFORM TO ASTM
D1974/D1974M, SEALING METHOD B.
WSC: LP ITEM SIZE: 72.0 X 36.0 X 15.0 ITEM WEIGHT: 179.0 APPROVED: NELSON OLIVEIRA
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
Page 1 of 1 Pages
File details come from the government source that posted it. Updated .