SPE8EN27T0172.pdf
PDF 491 KB Posted
- Attached to
- TELEPHONE SET and 1 more item
- Solicitation number
- SPE8EN27T0172
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
1. REQUEST NO.
SPE8EN-27-T-0172
2. DATE ISSUED
2026 OCT 15
3. REQUISITION/PURCHASE REQUEST NO.
7018587839
RATING
DO-C9
DLA TROOP SUPPORT
CONSTRUCTION & EQUIPMENT T & IFO EQ
700 ROBBINS AVENUE
PHILADELPHIA PA 19111-5096
USA
Name: Jennifer Esworthy Buyer Code:PEPCECZ Tel: 4457373607 Fax: 215-737-4717 Email: jennifer.esworthy@dla.mil
6. DELIVER BY (Date)
SEE SCHEDULE
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)
15. Date of Quotation
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 OCT 26
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
PAGE OF PAGES
POC INFORMATION:
WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/
ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.
QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil
FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:
https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).
MASTER SOLICITATION
THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:
https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf
This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:
http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.
THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:
FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)
DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
1 36
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 36 PAGES
SPE8EN-27-T-0172
SECTION A
THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED
SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT
CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE
DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.
MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.
ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM
(DIBBS) AT https://www.dibbs.bsm.dla.mil.
FAR 52.219-4 Notice of Price Evaluation Preference for HUBZone Small
Business Concerns
NOTE: FAR 19.1303 requires HUBZone concerns to be certified by the Small
Business Administration (SBA). Only vendors that are certified by SBA are eligible to receive the HUBZone price evaluation preference in FAR
52.219-4.
https://www.sba.gov/federal-contracting/contracting-assistance-programs/ hubzone-program#section-header-8
FAR 52.219-14 Limitations on Subcontracting (FEB 2023)(Deviation 2021-
O0008).
FAR 52.219-33 Nonmanufacturer Rule is applicable when the Small Business
Administration has not waived the nonmanufacturer rule (see
19.505(c)(4)).
NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 334210
Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards
However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is
PAGE 3 OF 36 PAGES
SPE8EN-27-T-0172
SECTION A
1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.
DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,
APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.
ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES
THE MANUFACTURERS INSPECTION SYSTEM AT A MINIMUM MUST COMPLY WITH SAE
AS9003 OR ISO 9001 TAILORED TO THE REQUIREMENTS OF SAE AS9003. IF THE
STANDARD THAT APPLIES TO YOUR COMPANY IS NOT AVAILABLE ON DIBBS AS A
SELECTION, THEN SELECT “OTHER” THEN SPECIFY WHAT “OTHER EQUIVALENT”
STANDARD APPLIES.
Fast Pay does not apply to this solicitation
FIRST ARTICLE APPROVAL – CONTRACTOR TESTING REQUIRED (FAR 52.209-3 and
ALT I)
THE CONTRACTOR SHALL TEST 2 UNIT(S) OF
LOT/ITEM 5805 / 5211320 AS
SPECIFIED IN THIS CONTRACT. PROVIDE WRITTEN NOTICE TO THE CONTRACTING
OFFICER AND THE QAR AT LEAST FOURTEEN (14) CALENDAR DAYS PRIOR TO
SHIPMENT TO GOVERNMENT FOR FAT, TO ACCOMODATE IN-PROCESS VERIFICATION
AND/OR FINAL INSPECTION BY THE QAR. THE CONTRACTOR SHALL SUBMIT THE
FIRST ARTICLE TEST REPORT WITHIN 30 CALENDAR
DAYS FROM THE DATE OF THIS CONTRACT. NOTIFICATION AND SUBMITTAL
ADDRESSES ARE IAW PROCUREMENT NOTE H03. WITHIN
30 CALENDAR DAYS AFTER THE GOVERNMENT
RECEIVES THE TEST REPORT, THE CONTRACTING OFFICER SHALL NOTIFY THE
CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR
DISAPPROVAL OF THE FIRST ARTICLE. SEE PROCUREMENT NOTE H03:
SUPPLEMENTAL FIRST ARTICLE TESTTING REQUIREMENTS (SEP 2016) - FOR
ADDITIONAL FAT REQUIREMENTS.
PAGE 4 OF 36 PAGES
SECTION A
DISPOSITION OF FAT UNITS IAW PARAGRAPH (e) OF FAR 52.209-3 OR 52.209-4.
Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.
This does not apply to Auto IDC.
If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.
APEX Accelerators, formally known as the Procurement Technical
Assistance Program (PTAP), is designed to increase the number of
U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.
6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT
PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE
GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS
SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR
52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO
SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING
PAGE 5 OF 36 PAGES
SPE8EN-27-T-0172
SECTION A
REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –
REPRESENTATION.
Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses
DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.
DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph
(c) of FAR solicitation provision 52.212-3, Offeror Representations and
Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business
Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:
(A) Small business;
(B) Service-disabled veteran-owned small business;
(C) Women-owned small business (WOSB) under the WOSB Program;
(D) Economically disadvantaged women-owned small business under the WOSB
Program; or
(E) Historically underutilized business zone small business.
ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING
Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.
PAGE 6 OF 36 PAGES
SPE8EN-27-T-0172
SECTION A
Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.
Required actions:
• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259
• Additional notices:
https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229
AMPS registration is not available at this time; however, check DLA's
DIBBS "Notices" section daily for updates.
• To receive AMPS/User Guide updates via email, contact:
JSONWEBServiceInquiry@dla.mil
Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the
Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN
2018)
Procurement History for NSN/FSC:005211320/5805
CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material
82872 SPE8EN26P0686 70.000 3650.00000 20260805 N
82872 SPE8EN26P7087P00001 82.000 3650.00000 20260722 N
60468 SPE8EN23P0797P00001 70.000 1313.00000 20230712 N
60468 SPE8EN23P0255P00001 35.000 1250.00000 20230104 N
PAGE 7 OF 36 PAGES
SPE8EN-27-T-0172
SECTION A
Procurement History for NSN/FSC:005211320/5805
CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material
60468 SPE8EN21P0973P00001 100.000 1195.00000 20210929 N
60468 SPE8EN21P0654P00001 300.000 827.00000 20210519 N
12763 W15P7T05DH4030002 245.000 0.02000 20081204 N
This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/
PAGE 8 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PR: 7018587839
NSN/MATERIAL:5805005211320
ITEM DESCRIPTION
TELEPHONE SET
TELEPHONE SET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
See MIL-T-13626B (1) NOT 3 for First Article Requirements
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
UNLESS OTHERWISE NOTED
FIRST ARTICLE TESTING IS REQUIRED
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/
To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access
PAGE 9 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev C Gen 3
IAW BASIC DRAWING NR 80063 SM-C-189372
REVISION NR B DTD 08/17/1981
PART PIECE NUMBER: TA1PT
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143136
REVISION NR A DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168938
REVISION NR D DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168954
REVISION NR Y DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168962
REVISION NR G DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169116
REVISION NR A DTD 02/06/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189344
REVISION NR A DTD 08/11/1967
PAGE 10 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168916
REVISION NR R DTD 06/15/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-168922
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168967
REVISION NR F DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189362
REVISION NR A DTD 02/10/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189373
REVISION NR B DTD 08/17/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169073
REVISION NR F DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169117
REVISION NR A DTD 02/09/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SC-C-143845
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169050
REVISION NR B DTD 05/25/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169051
REVISION NR D DTD 01/27/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169067
REVISION NR L DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SC-C-143762
REVISION NR DTD 05/10/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189381
REVISION NR C DTD 02/06/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189382
REVISION NR B DTD 08/15/1981
PAGE 11 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143134
REVISION NR A DTD 02/03/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143137
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169076
REVISION NR C DTD 09/07/1966
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169089
REVISION NR J DTD 01/31/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169095
REVISION NR A DTD 02/09/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189347
REVISION NR A DTD 09/07/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189348
REVISION NR A DTD 01/25/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189364
REVISION NR A DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3245728
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214300
REVISION NR B DTD 12/20/1994
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214301
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214302
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214303
REVISION NR A DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214304
REVISION NR DTD 01/03/1995
PAGE 12 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214305
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214306
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214307
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214309
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189374
REVISION NR D DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-990297
REVISION NR DTD 04/20/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168969
REVISION NR E DTD 02/11/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168970
REVISION NR E DTD 09/25/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168973
REVISION NR G DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168974
REVISION NR G DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168975
REVISION NR D DTD 09/07/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168976
REVISION NR H DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168977
REVISION NR C DTD 01/25/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168978
REVISION NR C DTD 08/11/1967
PAGE 13 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168982
REVISION NR J DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168983
REVISION NR E DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169007
REVISION NR C DTD 11/07/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169020
REVISION NR H DTD 02/22/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169025
REVISION NR D DTD 08/07/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169038
REVISION NR F DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169041
REVISION NR C DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169046
REVISION NR B DTD 09/07/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169053
REVISION NR B DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-A-990299
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143123
REVISION NR A2 DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143126
REVISION NR A DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143127
REVISION NR B DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143128
REVISION NR C DTD 08/14/1967
PAGE 14 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143129
REVISION NR B DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143130
REVISION NR A DTD 11/16/1960
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143138
REVISION NR DTD 12/29/1958
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143139
REVISION NR DTD 12/29/1958
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143141
REVISION NR A DTD 01/15/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143142
REVISION NR A DTD 08/18/1993
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143143
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143144
REVISION NR B DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143145
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143146
REVISION NR A DTD 08/21/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143147
REVISION NR B DTD 02/05/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143149
REVISION NR B DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143150
REVISION NR A DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143151
REVISION NR A DTD 08/14/1967
PAGE 15 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168906
REVISION NR K DTD 01/25/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168918
REVISION NR B DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168928
REVISION NR D DTD 05/21/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168929
REVISION NR E DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168930
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168931
REVISION NR E DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168955
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168956
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168960
REVISION NR E DTD 10/31/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168961
REVISION NR C DTD 03/11/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169040
REVISION NR D DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169078
REVISION NR D DTD 02/23/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169088
REVISION NR F DTD 02/09/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169090
REVISION NR B DTD 02/02/1959
PAGE 16 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169091
REVISION NR C DTD 09/25/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169099
REVISION NR E DTD 02/23/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169100
REVISION NR D DTD 02/06/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169102
REVISION NR D DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169103
REVISION NR C DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169106
REVISION NR E1 DTD 04/04/1961
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169107
REVISION NR E DTD 02/18/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169108
REVISION NR B DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169111
REVISION NR J DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169112
REVISION NR D DTD 06/03/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169113
REVISION NR D DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169114
REVISION NR C DTD 02/17/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169115
REVISION NR A DTD 02/09/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169118
REVISION NR C DTD 08/14/1967
PAGE 17 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189345
REVISION NR B DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189346
REVISION NR A DTD 09/25/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189351
REVISION NR DTD 03/03/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189352
REVISION NR A DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189353
REVISION NR A DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189354
REVISION NR DTD 03/11/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189355
REVISION NR DTD 03/12/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189357
REVISION NR B DTD 02/01/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189383
REVISION NR B DTD 02/01/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189384
REVISION NR B DTD 02/03/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189385
REVISION NR B DTD 02/01/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189387
REVISION NR DTD 02/20/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-990295
REVISION NR DTD 04/20/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-990296
REVISION NR DTD 04/20/1984
PAGE 18 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-143132
REVISION NR D DTD 08/17/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-143133
REVISION NR A DTD 01/24/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168923
REVISION NR E DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-169101
REVISION NR L DTD 03/18/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-170376
REVISION NR J DTD 02/09/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189358
REVISION NR DTD 06/12/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189360
REVISION NR C DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189361
REVISION NR A DTD 02/19/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189365
REVISION NR D DTD 02/02/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189367
REVISION NR DTD 07/23/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189371
REVISION NR D DTD 01/31/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189388
REVISION NR DTD 08/31/1958
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-143135
REVISION NR E DTD 08/17/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-143140
REVISION NR E DTD 08/17/1981
PAGE 19 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189376
REVISION NR A DTD 02/07/1966
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189377
REVISION NR C DTD 08/17/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189343
REVISION NR A DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169008
REVISION NR H DTD 11/07/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-169037
REVISION NR H DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189363
REVISION NR C DTD 02/06/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189366
REVISION NR D DTD 01/31/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189386
REVISION NR B DTD 08/17/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168990
REVISION NR N DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-169061
REVISION NR R DTD 10/01/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169043
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169034
REVISION NR H DTD 12/12/1991
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189378
REVISION NR F DTD 11/11/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169016
REVISION NR F DTD 08/15/1967
PAGE 20 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169048
REVISION NR D DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189349
REVISION NR C DTD 02/02/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169019
REVISION NR J DTD 11/08/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169030
REVISION NR F DTD 09/01/1982
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169069
REVISION NR E DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143122
REVISION NR DTD
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169010
REVISION NR L DTD 02/22/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169011
REVISION NR J DTD 02/22/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169022
REVISION NR H DTD 08/08/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169082
REVISION NR F DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189389
REVISION NR A DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168934
REVISION NR C DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169047
REVISION NR E DTD 09/07/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169057
REVISION NR B DTD 08/14/1967
PAGE 21 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169062
REVISION NR E DTD 09/07/1963
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169079
REVISION NR C DTD 01/13/1958
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169081
REVISION NR A DTD 02/18/1956
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168935
REVISION NR G DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189359
REVISION NR A DTD 01/27/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168966
REVISION NR E DTD 01/27/1956
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168971
REVISION NR D DTD 08/16/1955
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169068
REVISION NR F DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168968
REVISION NR H DTD 02/01/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168972
REVISION NR F DTD 08/14/1991
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168979
REVISION NR C DTD 01/30/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169042
REVISION NR D DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-143148
REVISION NR DTD 03/04/1959
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SC-A-4894
REVISION NR G DTD 05/17/1962
PAGE 22 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-189375
REVISION NR D DTD 02/07/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169029
REVISION NR F DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169015
REVISION NR E DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169031
REVISION NR D DTD 09/07/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169032
REVISION NR D DTD 01/24/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169033
REVISION NR F DTD 04/14/1993
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169075
REVISION NR D DTD 02/01/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-169028
REVISION NR E DTD 05/23/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169097
REVISION NR F DTD 08/14/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169071
REVISION NR K DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169077
REVISION NR C DTD 02/23/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169070
REVISION NR J DTD 01/27/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168908
REVISION NR F DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168914
REVISION NR L DTD 02/28/1983
PAGE 23 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168919
REVISION NR E DTD 10/24/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168958
REVISION NR H DTD 06/15/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168964
REVISION NR E DTD 01/31/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168965
REVISION NR C DTD 10/31/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168904
REVISION NR D DTD 11/12/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168907
REVISION NR L DTD 01/25/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-168905
REVISION NR N DTD 01/01/1939
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-168910
REVISION NR J DTD 02/16/1983
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169026
REVISION NR E DTD 11/08/1986
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-189350
REVISION NR A DTD 01/27/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168963
REVISION NR E DTD 10/31/1968
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3214308
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 A3246786
REVISION NR DTD 01/03/1995
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-289369
REVISION NR DTD 04/13/1960
PAGE 24 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-D-168902
REVISION NR J DTD 08/10/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-168980
REVISION NR F DTD 08/11/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169009
REVISION NR G DTD 08/14/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169052
REVISION NR E DTD 08/15/1967
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169064
REVISION NR G DTD 01/26/1984
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-B-169066
REVISION NR K DTD 08/15/1981
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE QAP 14153 SQAP-FAT3
REVISION NR DTD 08/26/2025
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE DRAWING NR 80063 SM-C-189372
REVISION NR DTD 05/22/2023
PART PIECE NUMBER:
TDP Rev C Gen 3
IAW REFERENCE SPEC NR MIL-T-13626B(1) NOT 4
REVISION NR B DTD 03/21/2024
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .
0001 7018587839 0001 EA 109.000
NSN/MATERIAL:5805005211320
DELIVERY (IN DAYS):0212
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
PAGE 25 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PR: 7018587839 PRLI: 0001 CONT’D
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
Mark and label all packaging and packing in accordance with MIL-STD-129.
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/28/2027 Original Required Delivery Date:12/29/2027
CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
PAGE 26 OF 36 PAGES
SPE8EN-27-T-0172
SECTION B
PR: PRLI: CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0030
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 27 OF 36 PAGES
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)
SECTION H - SPECIAL CONTRACT REQUIREMENTS
252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)
(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.
(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:
(1) Federal Insecticide, Fungicide and Rodenticide Act;
(2) Federal Food, Drug and Cosmetics Act;
(3) Consumer Product Safety Act;
(4) Federal Hazardous Substances Act; or
(5) Federal Alcohol Administration Act.
(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.
MATERIAL
(If None, Insert “None.”) ACT
(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph
(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.
(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).
(End of clause)
SECTION I - CONTRACT CLAUSES
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)
252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)
252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT
INFORMATION (JAN 2023) (DFARS)
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)
252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)
252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES
(JAN 2023) (DFARS)
252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 28 OF 36 PAGES
SPE8EN-27-T-0172
SECTION I - CONTRACT CLAUSES (CONTINUED)
252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)
252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT
2014) (DFARS)
252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)
252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY
COMPANIES (DEC 2018) (DFARS)
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)
(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.
“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.
“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall --
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/
(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items --
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002
(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .