SPE8ED27T0216.pdf

PDF 473 KB Posted

Attached to
COLLAPSIBLE JMIC 3.0K AND 2 MORE ITEMS
Solicitation number
SPE8ED27T0216
Issued by

About this file

Request for Quotations (RFQ) - Collapsible JMIC 3.0K Containers

This RFQ, issued November 16, 2026, by DLA Troop Support (Construction & Equipment Containers, Philadelphia, PA), solicits quotations for nine units of Collapsible Joint Modular Intermodal Container (JMIC) 3.0K assemblies (NSN 8145-01-588-1830). Quotations are due November 27, 2026, with delivery required within 235 calendar days. The acquisition is not a small business set-aside and requires competitive bidding through the DLA Internet Bid Board System (DIBBS). Inspection and acceptance occur at origin under FOB Origin terms, with First Destination Transportation (FDT) program provisions applicable. All quotations must include pricing for three additional line items: First Article Testing (CLIN 0002) with 150-day delivery, Production Lot Testing (CLIN 0003) with 215-day delivery, and mandatory production lot sampling upon completion of first article approval. Procurement history shows recent awards to vendor CAGE code 0SWN5 ranging from $3,626 to $4,803.16 per unit across multiple contracts since June 2024.

The RFQ incorporates extensive technical, quality, and cybersecurity requirements detailed in the DLA Master Solicitation (Revision 106) and DLA Technical and Quality Master List. The item is subject to export-controlled technical data under ITAR/EAR regulations; offerors must possess approved US/Canada JCP certification and DLA approval to access controlled technical data. First article approval is mandatory—government testing required at NSWC IHD Det. Picatinny (N38634), with approval notification within 60 days of receipt. The first article test cost of $15,000 will be added to offered pricing for evaluation. Production lot testing involves 2% sampling (minimum one unit) with 15-day testing plus 5-day evaluation period. Additional requirements include MIL-STD-130N identification marking, MIL-STD-129 shipping/storage marking, and compliance with DFARS Buy American provisions, domestic material restrictions, and hazard warning labeling standards. The solicitation contains standard FAR, DFARS, and DLAD clauses covering cybersecurity (CMMC Level 2), covered defense telecommunications equipment prohibitions, transportation of supplies by sea (U.S.-flag vessel requirement), and wide-area workflow payment instructions through WAWF.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE8ED-27-T-0216

2. DATE ISSUED

2026 NOV 16

3. REQUISITION/PURCHASE REQUEST NO.

7019139877

RATING

DO-C9

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT CONTAINERS

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Name: Ogden Howard Buyer Code:PEPCDD3 Tel: 445-737-1263 Fax: (215) 737-7557 Email: ogden.howard@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 27

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 106 (NOVEMBER 3, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision11-3-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 29

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 29 PAGES

SPE8ED-27-T-0216

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

FAR 52.219-6 Notice of Total Small Business Set-Aside

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 332439

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

PAGE 3 OF 29 PAGES

SPE8ED-27-T-0216

Fast Pay does not apply to this solicitation

FIRST ARTICLE APPROVAL – GOVERNMENT TESTING REQUIRED (FAR 52.209-4 AND

ALT I)

THE CONTRACTOR SHALL DELIVER 2 UNIT(S) OF

LOT/ITEM 8145 / 15881830

WITHIN 150 CALENDAR DAYS FROM THE DATE OF

THIS CONTRACT TO THE GOVERNMENT AT THE LOCATION SPECIFIED BELOW FOR

FIRST ARTICLE TESTS.

N38634

NSWC IHD DET PICATINNY

ATTN: CODE W64(TEST AND EVALUATION)

BLDG 3355

Whiter Road

PICATINNY ARSENAL

NJ

7806-5000

WITHIN 60 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE.

DISPOSITION OF FIRST ARTICLES:

Procurement Note E02: Supplemental First Article Exhibit Disposition - Government Maintained (MAY 2020)

The first article units will be held by the Government, either destroyed in testing or maintained as a manufacturing standard. The contractor will be required to produce/deliver the full quantity indicated on the contract order, the first article units will not be part of the production quantity.

Procurement Note M04: Evaluation Factor for Government Testing of First Articles (MAY 2020)

THE COST TO THE GOVERNMENT FOR FIRST ARTICLE TESTING SHALL BE A FACTOR

IN EVALUATING OFFERS. THE GOVERNMENT’S TESTING COST WILL BE ADDED TO

THE OFFERED PRICE OF THE APPLICABLE ITEM. UNLESS CITED ELSEWHERE IN THE

SOLICITATION, THE TESTING COST IS SHOWN BELOW: $ 15000.00 .

Procurement Note E04: Production Lot Testing – Government (MAY 2020)

(1) The purpose of production lot testing (PLT) is to validate quality conformance of products. PLT is to be completed on the production lot(s) after First Article approval, when a first article is required.

The contractor shall price the PLT CLIN to cover the cost of the approved samples that are consumed, destroyed or otherwise rendered unusable during testing.

(2) The contractor shall provide written notice to the contracting officer and the QAR at least fourteen (14) calendar days (or as otherwise specified in the contract) prior to the date when the contractor will present the production lot to the QAR for selection of PLT samples.

PAGE 4 OF 29 PAGES

SPE8ED-27-T-0216

SECTION A

(3) The QAR will select 2 samples, at random from the production lot(s) produced. If the quantity stated in the previous sentence equals "ZZ", the contractor should use the appropriate sample size identified within the Technical Data Package or applicable Sample Plan provided by the Government. The contractor will seek approval of the sample size with the QAR.

(4) The contractor shall ship the PLT samples by traceable means to:

NSWC IHD DET PICATINNY

N38634

NSWC IHD DET PICATINNY

ATTN: CODE W64(TEST AND EVALUATION)

BLDG 3355

Whiter Road

PICATINNY ARSENAL

NJ

7806-5000

Shipment shall be marked “Production lot samples – do not post to stock”, contract and lot number. A copy of the DD250/IRAPT Receiving Report shall be placed on the exterior of the shipping container in accordance with MIL STD 129. Include the following interior documentation: DD Form 1222 and DD250/IRAPT receiving report signed by the QAR, copy of contract/order, copies of test reports showing actual results and tolerances specified in the technical data package, material and process certifications, process operations and inspection method sheets, copies of drawings used to manufacture the PLT sample (proper marking to assert proprietary or other rights to restrict public disclosure is the contractor’s responsibility), documents required under contract deliverables requirements list, a prepaid shipping label or document with the information required to return the PLT samples to the contractor at no cost to the Government.

(5) At time of shipment, copies of the signed DD Form 1222, DD250/IRAPT Receiving Report, transportation tracking information and information for return of the PLT samples shall be provided to the contracting officer. The Government testing time will be 15 test plus 5 evaluation calendar days for the test results to be provided to the contractor.

(6) If a PLT sample fails, the entire production lot quantity produced fails. The contractor shall propose corrective action, if appropriate.

(7) PLT samples will be returned to the contractor with a copy of the test report, at contractor expense.

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, PAGE 5 OF 29 PAGES

SPE8ED-27-T-0216

SECTION A

please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are

PAGE 6 OF 29 PAGES

SPE8ED-27-T-0216

SECTION A

required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

PAGE 7 OF 29 PAGES

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

Procurement History for NSN/FSC:015881830/8145

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

0SWN5 SPE8ED27P0170 1.000 4803.16000 20261105 N

0SWN5 SPE8ED26P1015P00001 20.000 3729.23000 20260731 N

0SWN5 SPE8ED26P0992 5.000 3729.23000 20260708 N

0SWN5 SPE8ED26P0917P00001 5.000 3729.23000 20260707 N

0SWN5 SPE8ED26P0983 10.000 3729.23000 20260706 N

0SWN5 SPE8ED26P0307 3.000 3729.23000 20251219 N

0SWN5 SPE8ED26P0262 10.000 3729.23000 20251205 N

0SWN5 SPE8ED25P1225P00001 6.000 3626.00000 20250616 N

0SWN5 SPE8ED25P1227 4.000 3729.23000 20250606 N

0SWN5 SPE8ED25P1164 3.000 3729.23000 20250527 N

0SWN5 SPE8ED25P1069 40.000 3729.23000 20250522 N

0SWN5 SPE8ED25P1068 4.000 3729.23000 20250508 N

0SWN5 SPE8ED25P0664P00001 1.000 3730.00000 20250227 N

0SWN5 SPE8ED25P0286P00001 4.000 3729.23000 20250130 N

0SWN5 SPE8ED25P0362P00002 2.000 3729.23000 20241210 N

0SWN5 SPE8ED25P0236 10.000 3729.00000 20241113 N

0SWN5 SPE8ED25P0200 5.000 3729.23000 20241105 N

0SWN5 SPE8ED24P1057P00001 3.000 3729.23000 20240924 N

0SWN5 SPE8ED24P0995P00003 2.000 3729.23000 20240906 N

0SWN5 SPE8ED24P0797 32.000 3729.23000 20240621 N

PAGE 8 OF 29 PAGES

SPE8ED-27-T-0216

SECTION A

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 9 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

PR: 7019139877

NSN/MATERIAL:8145015881830

ITEM DESCRIPTION

COLLAPSIBLE JMIC 3.0K

COLLAPSIBLE JMIC 3.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING "OPEN SOLICITATION ONLY".

TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

UNLESS OTHERWISE NOTED

PAGE 10 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

FIRST ARTICLE TESTING IS REQUIRED

Mandatory Product Verification Testing (PVT) is invoked. The contractor shall allow for 60 days for testing to be completed. The 60-day timeframe will begin when DLA or its representative has received the specified sample. Proof of receipt must be in written form, i.e.: third party shipping confirmation or email. This time must be calculated into the overall delivery schedule.

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

Color: TAN

P/N: 7517221-2

TDP Rev B Gen 2

IAW BASIC DRAWING NR 53711 7517221

REVISION NR G DTD 08/13/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7516536

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7516617

REVISION NR DTD 06/16/2006

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7516774

PAGE 11 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

REVISION NR DTD 10/11/2006

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517221

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517168

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517169

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517170

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517171

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517172

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517173

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517174

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517175

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517176

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517177

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517178

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517179

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7517222

PAGE 12 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517223

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517224

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517226

REVISION NR C DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517227

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517228

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517229

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517230

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517231

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517232

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517233

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517234

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517225

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517235

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7517236

PAGE 13 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517237

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517238

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517239

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517240

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517241

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517242

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517244

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517245

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517246

REVISION NR B DTD 11/06/2009

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517247

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517248

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517249

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517250

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7517251

PAGE 14 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517252

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517253

REVISION NR B DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517254

REVISION NR C DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517255

REVISION NR A DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517256

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517257

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517258

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517259

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517260

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517261

REVISION NR B DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 8410933

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 8410941

REVISION NR A DTD 11/01/2005

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 8410942

REVISION NR DTD 08/02/2010

PART PIECE NUMBER:

IAW REFERENCE QAP 53711 7517221

PAGE 15 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

REVISION NR DTD 10/13/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 53711 7517221

REVISION NR F DTD 07/19/2021

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE QAP 14153 SQAP-FAT3

REVISION NR DTD 08/26/2025

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE QAP 14153 SQAP-PLT3

REVISION NR DTD 07/17/2025

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7019139877 0001 EA 9.000

NSN/MATERIAL:8145015881830

DELIVERY (IN DAYS):0235

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:00 OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

DLA TROOP SUPPORT

SUPPLEMENTAL QUALITY ASSURANCE PROVISION (SQAP)

SQAP

NSNs 8145-01-588-1810 ,,,,,,,,,,24 JAN 2013 8145-01-588-1825 8145-01-588-1830

DRAWING: (53711) 7517221

1. This supplemental quality assurance provision is to be used in conjunction with the following drawing: Naval Sea Systems Command (53711) drawings 7517221 and DL7517221. This document is applicable to the following item: Collapsible Joint Modular Intermodal Container (JMIC) Assembly.

PAGE 16 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

PR: 7019139877 PRLI: 0001 CONT’D

2. This SQAP establishes the requirements and schedule for the required Government First Article Test Sample and Government Production Lot Sampling Testing, when DLA is the procuring activity.

3. The JMIC shall be fabricated in accordance with drawings Naval Sea Systems Command drawings 7517221 and DL7517221.

4. Government First Article Testing is required as follows:

4.1 Competitive procurement of the subject item is approved contingent upon submittal, examination, inspection, testing, and approval of the First Article samples. The First Article Sample shall consist of two (2) JMIC Assemblies.

4.2 Prior to submission of the First Article for inspection, the contractor shall perform a complete inspection to assure conformance to all drawing requirements. The inspection is to be performed in the presence of the DCMA-Quality Assurance Representative (QAR). A copy of the dimensional, material, inspection reports, and surface treatments shall be mailed to the testing activity together when the First Article Test Sample is delivered.

4.3 The First Article Inspection Report is to be prepared in the contractor#s format. As a minimum the content of the report shall appear as presented in Data Item Description (DID) DI-NDTI-80809.

4.4 The First Article evaluation and testing shall be accomplished by and delivered to:

,,Director ,,Naval Surface Warfare Center ,,Indian Head Division, Detachment Earle ,,Bldg C-45, Code E423 ,,201 Highway 34 South ,,Colts Neck, NJ 07722-5023

4.5 First Article Testing shall consist of, but not limited to the following tests, inspections, and examinations:

(a) 100% dimensional conformance to drawing requirements.

(b) Material properties (physical characteristics and chemical composition).

(c) Finish Requirements.

(d) Visual Inspections.

(e) Serialization.

(f) Paragraphs 3.6.1 through 3.6.9 of PHST-176A

4.6 Scheduled lead time for new suppliers is estimated as follows:

ACTION; ACTION ACTIVITY; *CALENDAR DAYS

Submission of First Article;Contractor; 150

Testing & Evaluation Government; Test Activity; 90

Approval of Test Report/; DSCP-Contracting Officer; 30 Notification of Failure

*Calendar days are subsequent to the date of the contract.

Ten (10) days prior to shipment of the sample, the contractor shall notify the designated testing activity, in writing, of the anticipated shipping date, with an information copy to the DSCP-Contracting Officer.

These ten (10) days are included in the contractor#s 150 day lead time for submission of the First Article sample

4.7 Waiver of First Article may be granted if the bidder has previously furnished production quantities of the same or similar article to DLA or the Navy, within 36 months since the completion of the previous contract and articles thus furnished have exhibited satisfactory performance in service. All FAT waiver requests shall be submitted to the DSCP Contracting Officer and they will be coordinated between DLA and the

PAGE 17 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

PR: 7019139877 PRLI: 0001 CONT’D

Navy.

4.8 Copy of the Approval/Disapproval notification shall be forwarded to the Defense Supply Center Philadelphia, ATTN; DSCP-NASA, J. Stitsworth, 700 Robbins Ave, Philadelphia, PA, 19111-5096.

5. Quality Conformance Inspection Production Lot Sampling Testing.

Unless otherwise specified in the contract or purchase order, prior to delivery, the Government shall perform a sample lot inspection of the production containers. The DCMA-QAR shall randomly select up to 2% of the total production quantity containers. If the total production quantity is less than 100, the minimum sample shall be one (1) container. Seven days before the production quantities are to be tendered for acceptance, the contractor shall arrange to have the DCMA-QAR select the sample. Unless otherwise specified, the contractor shall be responsible for the delivery of the production lot samples to:

,,Naval Surface Warfare Center ,,Indian Head Division, Detachment Earle ,,Bldg C-45, Code E423 ,,201 Highway 34 South ,,Colts Neck, NJ 07722-5023

5.1 Scheduled Lead Time for Production Lot Testing is as follows:

ACTION; ACTION ACTIVITY; * CALENDAR DAYS

Submission of Production Sample; Contractor; Per Schedule

Testing & Evaluation; Government Test Activity ;15

Approval of Test Report/; DSCP-Contracting Officer; 5 Notification of Failure

PARCEL POST ADDRESS:

MMV200

COMMANDING OFFICER

BIC GENERAL ACCOUNT (MMV200)

6200 FLAGSHIP CIRCLE BLOUNT ISLAND

JACKSONVILLE FL 32226-3404

US

RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.

FREIGHT SHIPPING ADDRESS:

MMV200

DISTRIBUTION MANAGEMENT OFFICE

6200 FLAGSHIP CIRCLE BLOUNT ISLAND

M/F: MMV200 BIC GENERAL ACCOUNT

JACKSONVILLE FL 32226-3404

US

M/F: (TCN) MMV20063130027

RDD: 777

PROJ: TP 1

SUPP ADD: YBACKO SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: ADV: 23 FC: CS

Need Ship Date:00/00/0000 Original Required Delivery Date:11/13/2026

PAGE 18 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

PR: 7019139877 PRLI: 0001 CONT’D

GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000052

DELIVERY (IN DAYS):0150

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

PRODUCTION LOT TESTING - GOVERNMENT TESTING REQUIRED (REFER TO

PROCUREMENT NOTE E04 FOR ADDITIONAL INFORMATION)

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0003 0000000000 EA 1.000

PAGE 19 OF 29 PAGES

SPE8ED-27-T-0216

SECTION B

PR: PRLI: CONT’D

NSN/MATERIAL:S00000061

DELIVERY (IN DAYS):0215

THIS LINE ITEM SIGNIFIES THE PRODUCTION LOT TEST REQUIREMENT (PLT).

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 29 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 29 PAGES

SPE8ED-27-T-0216

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 29 PAGES

SPE8ED-27-T-0216

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if applicable

Ship From Code See Resulting Award if applicable

Mark For Code See Resulting Award if applicable

Service Approver (DoDAAC)

See Resulting Award if applicable

Service Acceptor (DoDAAC)

See Resulting Award if applicable

Accept at Other DoDAAC See Resulting Award if applicable

LPO DoDAAC See Resulting Award if applicable

DCAA Auditor DoDAAC See Resulting Award if applicable

Other DoDAAC(s) See Resulting Award if applicable

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Contact the local contract administrator found in block 6 of the DD 1155 (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7999 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (DEVIATION 2026-O0015) (FEB 2026)

(DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 23 OF 29 PAGES

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) (DFARS)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA—BASIC (OCT 2024) (DFARS)

(a) Definitions. As used in this clause -- "Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

"U.S.-flag vessel" means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116.

(b) If the transportation of supplies by sea is anticipated under this contract, the Contractor shall --

(1) Notify the Contracting Officer and Maritime Administration (MARAD) at Cargo.Marad@dot.gov --

(i) Within 3 business days after contract award; or

(ii) Immediately prior to the shipment departure date necessary to meet delivery schedules, whichever is earlier; and

(2) Include in the notification --

(i) A statement of the Contractor's intent to transport supplies by sea;

(ii) The contract number; and

(iii) The task-order or delivery-order number, when applicable.

(c)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that -- (1)The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b. destination shipment);

(2)Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or (3)Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(d) The Contractor and its subcontractors may request, via the Contracting Officer, a waiver of the requirement to use a U.S.-flag vessel, or identification of any available U.S.-flag vessels, if the Contractor or a subcontractor sufficiently explains that --

(1) U.S.-flag vessels are not available at a fair and reasonable rate for commercial vessels of the United States; or

(2) U.S.-flag vessels are otherwise not available.

(e) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, however, if a DoD waiver is not approved prior to the shipper's sailing date, this will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date(s) and required delivery date(s);

(3) Special handling and…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .