SPE8E927Q0143.pdf
PDF 147 KB Posted
- Attached to
- PARTS KIT, LIFE PRESER AND 2 MORE ITEMS
- Solicitation number
- SPE8E927Q0143
About this file
This is a Request for Quotations (RFQ) issued by DLA Troop Support, Construction & Equipment MRO Services for a parts kit related to life preserver equipment.
The solicitation seeks 833 package groups (PG) of Parts Kit, Life Preserver (LPU-34P/36P), National Stock Number 4220-00-113-8290, with delivery required 90 days after date of order (ADO). The kit consists of upper and lower gaskets for inflators per Naval Air System Command Drawing 105AS100-6, with one package group containing 50 units. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil no later than November 27, 2026. The solicitation incorporates the DLA Master Solicitation for eProcurement Automated Simplified Acquisitions (Part 13), Revision 99 (February 20, 2025). Inspection and acceptance occur at origin; FOB is origin with delivery to DLA Distribution Jacksonville. Pricing terms are firm fixed price with no quantity variance allowed. The requirement includes First Article Testing (FAT) by the contractor for three package groups (150 units), with testing waived for suppliers with successful delivery history within the last five years. Production Lot Testing (PLT) by the Government is also required on three samples from the first production lot, with Government testing time of 90 calendar days. This is a Navy-identified Critical Safety Item requiring compliance with MIL-STD-129 marking standards, SAE AS9100 quality requirements, and submission of test reports in SAE AS9102 or MIL-HDBK-831 format. The solicitation is not a small business set-aside. The buying activity is located at 700 Robbins Avenue, Philadelphia, PA 19111-5096, with buyer contact Kaitlyn Bushnell at 445-737-9787 or kaitlyn.bushnell@dla.mil.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE8E9-27-Q-0143
1. REQUEST NO.
2026 NOV 19
2. DATE ISSUED
7018912744
3. REQUISITION/PURCHASE REQUEST NO.
DO-C9
RATING
DLA TROOP SUPPORT
CONSTRUCTION & EQUIPMENT MRO SVC I
700 ROBBINS AVENUE
PHILADELPHIA PA 19111-5096
USA
Buyer: KAITLYN BUSHNELL DKB0257 Tel: 445-737-9787 Email: KAITLYN.BUSHNELL@DLA.MIL
90 DAYS ADO
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 NOV 27
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 25 PAGES
SPE8E9-27-Q-0143
This buy may be a candidate for automated award. However, automated solicitations containing first article test requirements are not candidates for an automated award. All quotes must be submitted via the dla internet bid board system (dibbs) at https://www.dibbs.bsm.dla.mil. Micro-purchase quotes may be awarded prior to return date. All quotes must be submitted via the dla internet bid board system (dibbs) at https://www.dibbs.bsm.dla.mil.
This solicitation incorporates the terms and conditions set forth in the dla master solicitation for eprocurement automated simplified acquisitions (part 13) revision 99 (february 20, 2025) which can be found on the web at: https:// www.dla.mil/portals/104/documents/j7acquisition/mastersolicitation4asacqrev-99_february_20_2025.pdf
The requirements in dfars 252.204-7012, 252.204-7019 and 252.204-7020 apply when access to controlled unclassified information (cui) is required for the performance of a contract. The presence of cui in dla procurements is indicated by the inclusion of standard text object (sto) in the purchase order text (pot), the procurement item description (pid), the technical data package, or other requirements documentation. The inclusion of the following stos provides notice that the solicitation will result in a contract, task order, or delivery order that involves cui. If sto rd002
- covered defense information applies, or rq032 - export control of technical data is included, the requirements in dfars 252.204-7012, 252.204-7019 and 252.204-7020 must be met. Rd003 - covered defense information may be applicable if cui is identified during contract performance. Failure to comply may result in cancellation of automated purchase orders.
All quotes must be submitted via the dla internet bid board system (dibbs) at https://www.dibbs.bsm.dla.mil micro-purchase quotes may be awarded prior to return date unless this solicitation has been designated for auctioning.
Please include any price breaks in the quote remarks If this is a first time buy (requesting an informal cost breakdown and any other relavent information sent via email when quote submitted.)
No variation in quantity allowed.
PAGE 3 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION B
SUPPLIES/SERVICES: 4220-00-113-8290
ITEM DESCRIPTION:
PARTS KIT, LIFE PRESERVER (LPU-34P/36P).
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
30003 NAVAL AIR SYSTEM COMMAND
DRAWING 105AS100-6
KIT CONSISTS OF UPPER AND LOWER GASKETS
FOR THE INFLATOR.
1 PG = 50 EA
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Exception to DWG 105AS100 NOTE 3. Info can be put on Label and Affixed to the outside of the bag. UI=PG; PG=50; QUP=1
FAT - Contractor First Article Testing (FAT) is required and shall include three PG, (1PG = 50) production items, unless otherwise stated in the contract.
Destructive Testing Is NOT Required.
For FAT to be conducted at the contractor’s facility, the Government Representative at the contractor's facility will witness or participate in the contractor’s performance of FAT to verify conformance to requirements and the conditions under which FAT is conducted. Copies of required certifications shall be provided to the cognizant QAR.
PAGE 4 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION B
SUPPLY/SERVICE: 4220-00-113-8290 CONT'D
1. The contractor shall notify the ACO, PCO, and cognizant QAR seven (7) calendar days in advance of scheduled FAT.
2. The contractor shall provide a copy of FAT inspections and tests performed and the findings of these to the cognizant QAR. The contractor’s FAT report shall be in accordance with the First Article Inspection Report Form described in SAE Standard AS9102, Aerospace First Article Inspection Requirement, MILHDBK- 831, or contractor equivalent format. The FAT report shall identify inspections and tests performed and the quantitative results and findings from the tests. The FAT report as well as required certifications and other applicable documentation shall accompany items submitted for Government evaluation.
3. The contractor shall authorize testing laboratories and special process facilities to confirm results with the Government.
FAT Testing waived for all suppliers who have provided supplies within the last five years with no adverse history, unless otherwise directed.
PLT - Government PLT number of units: 3PG
Production Lot Testing (PLT) is required. Testing at Government facility shall be conducted in accordance with (IAW) ANSI/ASQC Z1.4-2008, LEVEL S-3 selected at random by the Cognizant Government Representative (e.g. DCMA). Samples shall be identified by contract number and lot number, and be clearly marked-Production Lot sample.
Testing IAW applicable drawings/specs and contract requirements. Upon completion of testing, samples will be returned to the contractor. In order for a production lot to be acceptable, all samples representative of the lot must pass all of the contract requirements. Upon notification of acceptance, samples will be considered part of the production quantity and shipped with the rest of the production lot. In the event a sample fails to pass requirements, the lot will be rejected.
For PLT to be conducted at a Government facility, prior to submitting specimens for evaluation, the contractor shall inspect the item(s) to the degree necessary to ensure conformance to contract requirements.
1. The contractor's inspection report shall be in accordance with the First Article Inspection Report Form described in SAE Standard AS9102, Aerospace First Article Inspection Requirement, MIL-HDBK-831<(>,<)> or contractor equivalent format. When specimens are to be submitted to the Government for PLT, the contractor’s inspection report accompanying the specimens shall identify inspections and tests performed and the quantitative results and findings from the tests. The contractor's inspection report as well as required certifications and other applicable documentation shall accompany items submitted for Government evaluation.
2. Complete PLT of all contract technical requirements may be performed by the Government on items randomly selected by the cognizant QAR from the first production lot that would be expected to result in a finished product for delivery and submitted to the Government facility for evaluation. If destructive testing is anticipated, as indicated above, it will be performed on some or all of these samples.
3. If a "Fit-Check" is required, it may be performed on some or all of these samples.
4. Fourteen (14) days prior to shipment of PLT sample(s), the contractor shall notify the designated test facility, in writing, of the anticipated shipping date, with an information copy to the PCO, ACO, and QAR. The contractor shall also arrange for preliminary inspection of test sample(s) by the QAR. The PLT sample(s) shall be forwarded to the identified point of contact at the designated test facility shown below.
PAGE 5 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION B
SUPPLY/SERVICE: 4220-00-113-8290 CONT'D
Attn: Mr. Michael Hoey or Mr. Gary Hall Address: Naval Air Warfare Center Aircraft Division Bldg. 2187 48110 Shaw Road. Unit 5 Patuxent River, MD 20670-1906
5. The marking on the PLT sample(s) shipping container shall read: “FOR
PRODUCTION LOT
TESTING. NOT RFI MATERIAL. DO NOT TAKE UP IN STOCK. CONTRACT NUMBER:
The shipping documentation shall contain this contract number and the lot/item identification
6. The contractor shall perform PLT of critical and other characteristics on samples randomly selected by the cognizant QAR from the remaining units of the first production lot.
The sample size for confirming Critical Characteristics will be based on Acceptance Quality Limit (AQL) value of 0.04 as defined in Table I, with acceptance based on zero defects. The sample size for confirming noncritical characteristics will be based on an AQL value of 0.10 as defined in Table I, with acceptance based on zero defects. The contractor performance of PLT of critical and other characteristics may be simultaneous to the Government's PLT or subsequent to notification of Government PLT results. The cognizant QAR will witness the contractor's PLT.
If FAT Waiver request is granted, then product testing will involve the following:
a) Testing will be performed on samples selected from the first production run, rather than FAT specimens.
b) Destructive testing may be required to fully evaluate select samples.
c) The delivery obligation is to provide the full quantity of conforming items specified in the contract.
d) Upon successful completion of the testing, there will be no unauthorized changes to manufacturing or quality methods, procedures, processes, sequences, facilities, materials, or approved subcontractors.
e) Changes to manufacturing or quality methods, procedures, processes, sequences, facilities, materials, or approved subcontractors may require new FAT or PLT
DETAILED DRAWING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
QUALITY ASSURANCE DATA
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1
IAW BASIC DRAWING NR 30003 105AS100
REVISION NR C DTD 04/05/1991
PART PIECE NUMBER: P/N 105AS100-6
Critical Safety Item
PAGE 6 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION B
SUPPLY/SERVICE: 4220-00-113-8290 CONT'D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 4220-00-113-8290 833.000 PG $ ________________ $ ________________
PARTS KIT,LIFE
PRESERVER
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
UI-PG;PG=50
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%
PAGE 7 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION B
SUPPLY/SERVICE: 0001-S00000053 CONT'D
0002 0001 - S00000053 1.000 EA $ ________________ $ ________________
FOB: DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
Not Applicable
Production Lot Testing (Government)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%
0003 0001 - S00000061 1.000 EA $ ________________ $ ________________
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
Not Applicable
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7018912744 0001 N/A N/A N/A 08/15/2027
0002 N/A N/A N/A N/A N/A N/A
0003 N/A N/A N/A N/A N/A N/A
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION C - SPECIFICATIONS/SOW/SOO/ORD
C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)
C21 SHIPPING INSTRUCTION REQUEST (SIR) (MAY 2026)
C16 FIRST DESTINATION TRANSPORTATION PROGRAM, GOVERNMENT ARRANGED TRANSPORTATION FOR MANUAL AWARDS
(AUG 2017)
SECTION E - INSPECTION AND ACCEPTANCE
E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025)
(1) If there is not a separate contract line item number (CLIN) for FAT, the offeror shall include all costs and risk associated with completion of the FAT requirement in the production CLIN price.
(2) If there is a separate FAT CLIN, the offeror shall include all costs and risk associated with completion of the FAT requirement in the FAT CLIN price.
The unit of issue for the FAT CLIN, EACH, is equal to one First Article Test (1EA=1FAT). To receive payment for any costs associated with FAT, the offeror shall propose costs associated with FAT on a separate CLIN. The offeror shall base the production CLIN price solely on all costs associated with completion of the production units and shall exclude all FAT-related costs.
(3) The contracting officer will use the total award price in selecting the best value offer from among all eligible offerors. However, for an offeror to be eligible for award, the contracting officer must determine that the FAT CLIN price (unless FAT is waived) and the production CLIN price are fair and reasonable; and, if set-aside under FAR Part 19, a fair market price. The offeror shall not propose a FAT CLIN price that is materially unbalanced in relation to the production CLIN price. In the event an offeror receives a waiver of the FAT requirement, the contracting officer will deduct the FAT CLIN price for the waived source in determining the total award price.
(4)(a) Notwithstanding the conditions for waiving first article, the contracting officer may order an additional first article sample, or portion thereof, in writing if there is a --
(i) Major change to the technical data;
(ii) Lapse in production for a period in excess of 90 days; or
(iii) Change in the place of performance (manufacturing facility), manufacturing process,material used, drawing, specification or source of supply.
(b) When conditions in paragraphs (4)(a)(i), (ii), or (iii) occur, the contractor shall notify the contracting officer; who will determine whether to order an additional first article sample or portion thereof and provide instructions concerning the submission, inspection, and notification of results. The contractor shall bear the costs of the additional first article testing resulting from any of the causes in paragraphs (4)(a)(i)-(iii) instituted by the contractor and not due to changes directed by the Government.
(5) Waivers. The offeror may submit a request for FAT waiver to the contracting officer, who may waive the FAT requirement when all of the following criteria apply:
(a) The offeror requesting waiver has successfully manufactured, delivered and the government accepted the item or a similar item. The offeror shall provide the following information and be prepared to provide documentary evidence upon the contracting officer's request:
(i) Contract number(s), date(s), and issuing Government agency or agencies.
(ii) Description of item previously furnished, identified by part number, type, model number and/or other identifying information. If the item previously furnished is similar but not identical to the item being acquired under the current buy, the offeror shall explain why manufacture of the item previously furnished is sufficient to demonstrate its ability to manufacture the item being acquired under the current buy without need for a first article test.
(iii) Engineering control document/change number of item previously furnished.
(b) There have been no changes to manufacturing processes, tooling, or place of performance.
(c) There have been no changes to manufacturing data (e.g., drawing revisions that change materials, dimensions, processes, inspection or testing requirements; or subcontractors used to manufacture the items successfully in the past).
(d) The offeror shall supply an item of the same design and manufactured by the same method at the same facilities as the item or similar item previously furnished and accepted under subparagraph (5)(a).
(6) Contractor-Performed FAT.
(a) The contractor shall test the quantities as outlined in paragraph (a) of FAR clause 52.209-3 as specified in the contract. The contractor shall submit reports in accordance with paragraph (b) of FAR clause 52.209-3, as supplemented in this procurement note.
(b] For test report preparation and delivery of contractor FAT, the contractor shall --
(i) Use the data item description DI-NDTI-80809B report format.
(ii)] Mark the test report with the following: “First article test report - Contract number:[ ] and lot/item number: [ ].
(iii) Sign the FAT Report, accompanied by the system of record receiving report (i.e, WAWF or] DD Form 250) and contractor confirmation that the same process and facilities used to manufacture the first article units will be used to manufacture the production units, to the contracting officer at the applicable address shown below:
(A) For awards issued by DLA Aviation; or DLA Troop Support Clothing and Textile (C&T), Medical Materiel, or Subsistence, submit the report to the procuring activity in Block 6 of the DD Form 1155, Block 7 of Standard Form (SF) 33, Block 5 of SF 26, or Block 9 of SF 1449 award.
(B) For awards issued by DLA Land (SPE7L), submit the report to the following address:
DLA Land - FLSEB ATTN: FAT Monitor P. O. Box 3990
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)
Columbus, OH 43218-399, or email to: Land.FAT.Monitor@dla.mil.
(C) For awards issued by DLA Maritime (SPE7M), submit the report to the following address:
DLA Maritime - FMSE ATTN: FAT Monitor P. O. Box 3990 Columbus, OH 43218-3990, or email to: maritime.fat.monitor@dla.mil.
(D) For awards issued by DLA Troop Support Construction and Equipment (SPE8E), email the report to Construction and Equipment FAT Monitor at trpsptcandefatmonitor@dla.mil. If report exceeds email limitations, submit the report to the following address:
DLA Troop Support ATTN: First Article Testing Monitor Building 3, 700 Robbins Avenue Philadelphia, Pennsylvania 19111.
Preferred electronic submissions: Hardware FAT Monitor at DLAHardwareFATMonitor@dla.mil.
(7) The contractor shall --
(a) Provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3;
(b) Maintain and make available all records evidencing those details at the Government's request.
(c) At least fourteen (14) calendar days (or as otherwise specified in the contract) prior to shipment to the Government, provide written notice to the contracting officer and to the cognizant DCMA Functional Specialist when full administration or Quality Support administration is delegated to DCMA.
(8) Government-performed FAT. The contractor shall --
(a) For delivery of separately priced Government first article samples for Government performed FAT ship the units and system of record receiving report (i.
e., WAWF or DD Form 250) to the test facility specified in paragraph (a) of FAR clause 52.209-4.
(b) For delivery of Government first article samples that are not separately priced, ship the units with a commercial shipping document to the test facility.
(c) Prepare the shipping container(s) by marking the external packages in bold letters, “First Article Exhibits - Do Not Post to Stock," adjacent to the MIL- STD-129 (latest revision) identification markings.
(d) Use a hard copy of the system of record receiving report (i.e., WAWF DD Form 250), or commercial shipping document as a packing list, in accordance with DFARS Appendix F.
(e) Mark the exterior of the shipping container in accordance with MIL-STD-129 (latest revision), paragraph 5.11.
(f) In the interior package, include hard copies of the contract, test reports, material certifications/process operation sheets, drawings used to manufacture the units, and a pre-paid return label or shipping account for payment.
(g) Send units by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express).
(h) Send an email with subject titled “Notification of Test Exhibits [ ]” to the corresponding address in (i) or (ii) below and to the contracting officer specified in the contract. In the email, provide the shipment date, contract/purchase order number, National Stock Number, means of transportation, tracking number, and summary of container contents. Attach a copy of the system of record receiving report (i.e., WAWF or DD Form 250) documenting the Government has performed the contract quality assurance within the system or record.
(i) DLA Land & Maritime - DSCCProdVerif@dla.mil
(ii) DLA Aviation - DSCR.Test & EvaluationOffice@dla.mil
(9) At its discretion, the Government may return FAT units to the contractor at no cost to the Government. The contractor shall submit the return address and pre-paid return label or shipping account for payment.
(10) If the Government disapproves or conditionally approves Government-performed FAT units, the Government will take action in accordance with FAR 52.209-4.
E09 CONTRACTOR FIRST ARTICLE TEST (FAT) INFORMATION (JUL 2022)
(1) For FAT requirements, the Government will conduct inspection at source and acceptance at destination. The FOB point is destination. Due to known systems limitations, solicitations may contain erroneous inspection, acceptance, and FOB points. This procurement note takes precedence over any conflicting terms.
(2) CONTRACTOR FAT DELIVERY SCHEDULE
(a) Days: To Deliver FAT Report to the Government
(b) Days: Government FAT Report Evaluation and Notification to Contractor
(c) Days: To Deliver Final Production Quantity After Approval of FAT Report. If PLT applies, this line will be blank; the number of delivery days for final production quantity will appear in procurement note E03, Production Lot Testing - Contractor, or E04, Production Lot Testing - Government, as applicable
(d) Total Delivery Days for FAT (Sum of Paragraphs (2)(a) through (2)(c))
52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR
E04 PRODUCTION LOT TESTING (MAY 2020)
(1) The purpose of production lot testing (PLT) is to validate quality conformance of products. The Government conducts PLT on the production lot(s) after first article approval, when a first article is required. The contractor shall price the PLT CLIN to cover the cost of any approved samples that are consumed, destroyed, or otherwise rendered unusable during testing. The unit of issue for the PLT CLIN, EACH, is equal to one Production Lot Test (1EA=1PLT).
(2) For purposes of facilitating PLT, the engineering support activity and/or testing facility has authority to communicate and conduct clarifications directly with contractors. If this results in necessary changes to contract requirements, the contractor shall contact the post award
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)
contracting officer or contract administrator (see the “Issued By” blocks on the contract award or order) for written approval. The contractor shall not act on any revisions or other changes until the contracting officer issues a written modification approving the proposed revision(s)/ change(s).
(3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3, and maintain and make available all records evidencing those details if requested by the Government. At least fourteen (14) calendar days (or as otherwise specified in the contract) prior to the date when the contractor will present the production lot for selection of PLT samples, the contractor shall provide written notice to the contracting officer (and the cognizant DCMA functional specialist when full administration or quality support administration is delegated to DCMA).
(4) Unless otherwise stated, the contractor shall select [ 3 ] samples, at random from the production lot(s) produced. If the quantity stated in the previous sentence equals “ZZ,” the contractor shall use the appropriate sample size identified in the technical data package or applicable sample plan provided by the Government. If the contractor cannot determine the sample quantity, the contractor shall obtain written confirmation of the sample size from the contracting officer.
(5) If a PLT sample fails, the entire production lot from which the contractor took the sample fails. The contractor shall propose corrective action, if appropriate.
(6) The Government will return PLT samples to the contractor, with a copy of the test report, at contractor expense.
(7) The contractor shall prepare and disseminate the samples as follows:
(a) Ship the selected PLT samples by traceable means. [Mark the shipment “Production Lot Samples - Do Not Post To Stock,” Contract Number [ ] and Lot/Item Number [ ]”. Place a copy of the system of record receiving report (i.e., WAWF or DD Form 250) on the exterior of the shipping container in accordance with DFARS Appendix F. Mark the exterior of the shipping container in accordance with MIL-STD-129 (latest revision), paragraph 5.11.
(b) Include the following interior documentation:
(i) DD Form 1222 and system of record receiving report (i.e., WAWF or DD Form 250);
(ii) Copy of contract/order;
(iii) Copy of test reports, showing actual results and tolerances specified in the technical data package;
(iv) Material and process certifications;
(v) Process operations and inspection method sheets;
(vi) Copies of drawings used to manufacture the PLT sample (proper marking to assert proprietary or other rights to restrict public disclosure is the contractor's responsibility);
(vii) Documents required under contract deliverables requirements list; and
(viii) A prepaid shipping label or document with the information required to return the PLT samples to the contractor at no cost to the Government.
(8) At the time of shipment, the contractor shall sign and provide copies of the DD Form 1222, system of record receiving report (i.e., WAWF or DD Form 250), transportation tracking information, and information for return of the PLT samples to the contracting officer. The Government testing time will be [ 90 ] calendar days for the test results to be provided to the contractor.
(9) For PLT, the Government will conduct inspection at source and acceptance at destination. The FOB point is destination.
(10) Delivery.
(a) Ship samples to [ ].
(b) Delivery Schedule Information:
(i) [ ] Total Delivery Days for FAT (If Applicable)
(ii) [ ] Days: Completion of Production Units (to include PLT samples), and Submission of samples for Government Testing
(iii) [ ] Days: Government PLT Report Evaluation and Notification to Contractor
(iv) [ ] Days: Delivery of final production quantity to Government
(v) [ ] Total Delivery Days (Sum of paragraph (10)b)(i) through (iv))
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR
52.247-29 F.O.B. ORIGIN (FEB 2006) FAR
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
SECTION G - CONTRACT ADMINISTRATION DATA
G01 ADDITIONAL WIDE AREA WORKFLOW (WAWF) INFORMATION (AUG 2017)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) DFARS
As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC (If blank, see resulting award)
Issue By DoDAAC (If blank, see resulting award)
Admin DoDAAC (If blank, see resulting award)
Inspect By DoDAAC (If blank, see resulting award)
Ship To Code (If blank, see resulting award)
Ship From Code (If blank, see resulting award)
Mark For Code (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award)
Service Acceptor (DoDAAC)
(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of Clause)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award)
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award)
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award)
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
See administer listed on page 1
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of Clause)
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)
SECTION I - CONTRACT CLAUSES
52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY
AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION I - CONTRACT CLAUSES (CONTINUED)
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS
52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB
2026) FAR
252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS
252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN
2023) DFARS
52.209-3 FIRST ARTICLE APPROVAL -- CONTRACTOR TESTING (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 9.308-1(a) and (b), insert the following clause:
[Contracting Officer inserts details]
(a) The Contractor shall test unit(s) of Lot/Item as specified in this contract. At least calendar days before the beginning of first article tests, the Contractor shall notify the Contracting Officer, in writing, of the time and location of the testing so that the Government may witness the tests.
(b) The Contractor shall submit the first article test report within calendar days from the date of this contract to [insert address of the Government activity to receive the report] marked “FIRST ARTICLE TEST REPORT: Contract No. , Lot/Item No. ." Within calendar days after the Government receives the test report, the Contracting Officer will notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval will state any further action required of the Contractor. A notice of disapproval will cite reasons for the disapproval.
(c) If the first article is disapproved, the Contractor, upon Government request, shall repeat any or all first article tests. After each request for additional tests, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall then conduct the tests and deliver another report to the Government under the terms and conditions and within the time specified by the Government. The Government will take action on this report within the time specified in paragraph (b) above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule, or for any additional costs to the Government related to these tests.
(d) If the Contractor fails to deliver any first article report on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.
(e) Unless otherwise provided in the contract, and if the approved first article is not consumed or destroyed in testing, the Contractor may deliver the approved first article as part of the contract quantity if it meets all contract requirements for acceptance.
(f) If the Government does not act within the time specified in paragraph (b) or (c) above, the Contracting Officer will, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.
(g) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government.
(h) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the offeror/contractor and have been accepted by the Government. The offeror/contractor may request a waiver.
(End of clause)
52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-50 COMBATING TRAFFICKING IN PERSONS, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I. As prescribed in 22.1703-2(a)(2), substitute the following paragraph in place of paragraph (c)(1)(i) of the basic clause:
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 25 PAGES
SPE8E9-27-Q-0143
SECTION I - CONTRACT CLAUSES (CONTINUED)
(c)(1)(i)(A) The United…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .