SPE8E627Q0057.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE8E6-27-Q-0057

1. REQUEST NO.

2026 OCT 22

2. DATE ISSUED

R0980852667305

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT (CLASS IV)

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: JASMINE JILES DJJ0177 Tel: 445-737-1695 Email: JASMINE.JILES@DLA.MIL

60 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 OCT 29

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 30 PAGES

SPE8E6-27-Q-0057

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS (PART13) REVISION 105 (May 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/ FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

In the event of a conflict between provisions/clauses explicitly cited in the solicitation and award and those located in the DLA Master Solicitation, the provisions/clauses in the solicitation/award will take precedence.

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.

PAGE 3 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLIES/SERVICES: 4240-01-655-6723

ITEM DESCRIPTION:

FACE PLATE ASSEMBLY

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RD002, COVERED DEFENSE INFORMATION APPLIES

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

UNLESS OTHERWISE NOTED

FIRST ARTICLE TESTING IS REQUIRED

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PAGE 4 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING "OPEN SOLICITATION ONLY".

TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

This is an identified Chemical Biological Defense Equipment item.

All packaged items of supply shall be marked IAW MIL-STD-129.

Military packaging is required. Requirements defining levels of packaging shall be IAW MIL-STD-2073-1. If Special Packaging Instructions (SPI) are provided in the technical data package (TDP), the SPI’s requirements will take precedence over MIL-STD-2073-1 where applicable.

For all Chemical Biological Items, the First Article Test (FAT) waiver timeframe is reduced to one (1) year. The use of the Army Combat Capabilities Development Command Chemical Biological Center DEVCOM CBC Form 081 is required for all First Article Test waivers, (note: do not use a DD Form 1694 “Request for Variance (or Waiver)” for a FAT waiver).

Include RQ038 in the Material Master for all Chemical Biological Items.

This supersedes the three (3) year waiver time frame allowed in Procurement Note H03- Supplemental First Article Testing Requirements.

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers

RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL,

BIOLOGICAL CENTER MATERIALS - ENGINEERING CHANGE PROPOSAL REQUEST FOR

VARIANCE (DEVIATION OR WAIVER)

Lot numbering shall be required per MIL-STD-1168.

Manufacturers shall contact usarmy.ria.ecbc.mbx.qa@mail.mil to obtain a unique manufacturer's identification symbol.

Although MIL-STD-1168 is an ammunition specification all sections(1,2,3,4,and 6) are applicable except the following:

4.4.5.1.3 Same size or caliber items

4.4.6.6 Explosives and chemicals

4.6.7.1 Navy Exception

4.7.6 Master calibration component lots and master calibration lots

4.7.7 Reference lots

4.7.9.3 Regrouped lots - Navy lot numbering exceptions

Ammunition lot number-ammunition lot theater indicators (All SubSections)

4.9 Ammunition lot number-marking on energetic components, inert components, complete rounds and missiles (All SubSections)

4.10 Ammunition data cards-description and applicability

(All SubSections)

4.11 Ammunition data card-preparation and instructions

(All SubSections)

4.12 Ammunition data card-submission and distribution

(All SubSections)

PAGE 5 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

5 Detailed Requirements (All SubSections)

All MIL-STD-129 (latest version) marking requirements are still applicable

FULL AND OPEN COMPETITION APPLY

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

Lot numbering shall be required per MIL-STD-1168.

Manufacturers shall contact usarmy.ria.ecbc.mbx.qa@mail.mil to obtain a unique manufacturer's identification symbol.

Although MIL-STD-1168 is an ammunition specification all sections(1,2,3,4,and 6) are applicable except the following:

4.4.5.1.3 Same size or caliber items

4.4.6.6 Explosives and chemicals

4.6.7.1 Navy Exception

4.7.6 Master calibration component lots and master calibration lots

4.7.7 Reference lots

4.7.9.3 Regrouped lots - Navy lot numbering exceptions

Ammunition lot number-ammunition lot theater indicators (All SubSections)

4.9 Ammunition lot number-marking on energetic components, inert components, complete rounds and missiles (All SubSections)

4.10 Ammunition data cards-description and applicability

(All SubSections)

4.11 Ammunition data card-preparation and instructions

(All SubSections)

4.12 Ammunition data card-submission and distribution

(All SubSections) 5 Detailed Requirements (All SubSections)

All MIL-STD-129 (latest version) marking requirements are still applicable

Lot numbering shall be required per MIL-STD-1168.

Manufacturers shall contact usarmy.ria.ecbc.mbx.qa@mail.mil to obtain a unique manufacturer's identification symbol.

Although MIL-STD-1168 is an ammunition specification all sections(1,2,3,4,and 6) are applicable except the following:

4.4.5.1.3 Same size or caliber items

4.4.6.6 Explosives and chemicals

4.6.7.1 Navy Exception

4.7.6 Master calibration component lots and master calibration lots

4.7.7 Reference lots

4.7.9.3 Regrouped lots - Navy lot numbering exceptions

Ammunition lot number-ammunition lot theater indicators (All SubSections)

4.9 Ammunition lot number-marking on energetic components, inert components, complete rounds and missiles (All SubSections)

4.10 Ammunition data cards-description and applicability

(All SubSections)

4.11 Ammunition data card-preparation and instructions

(All SubSections)

4.12 Ammunition data card-submission and distribution

(All SubSections) 5 Detailed Requirements (All SubSections)

All MIL-STD-129 (latest version) marking requirements are still applicable

PAGE 6 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.

CRITICAL APPLICATION ITEM

TDP Rev C Gen 3

IAW BASIC DRAWING NR 81361 806881-05

REVISION NR F DTD 12/11/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 5-1-1522

REVISION NR J DTD 07/12/2016

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10015282

REVISION NR B DTD 10/25/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013541

REVISION NR B DTD 10/05/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013952

REVISION NR D DTD 10/05/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10013952

REVISION NR E DTD 09/10/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51125

REVISION NR A DTD 10/31/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10011857

REVISION NR B DTD 04/18/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50880

REVISION NR C DTD 04/18/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10011857

REVISION NR A DTD 04/18/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013736

REVISION NR D DTD 12/09/2022

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014688

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014688

REVISION NR A DTD 10/10/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51060

REVISION NR E DTD 12/02/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

PAGE 7 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

IAW REFERENCE DRAWING NR 81361 10014833

REVISION NR D DTD 03/05/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014833

REVISION NR DTD 09/18/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 00-2982

REVISION NR C DTD 12/10/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 00-3942

REVISION NR C DTD 10/05/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10011852

REVISION NR B DTD 09/26/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10011852

REVISION NR A DTD 05/14/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10011894

REVISION NR A DTD 10/02/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10012098

REVISION NR E DTD 02/14/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10012098

REVISION NR E DTD 05/30/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013539

REVISION NR C DTD 08/20/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10013539

REVISION NR B DTD 10/02/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10013541

REVISION NR C DTD 07/25/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014470

REVISION NR B DTD 10/05/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014470

REVISION NR B DTD 09/17/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014479

REVISION NR B DTD 10/05/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014479

REVISION NR A DTD 10/02/2018

PAGE 8 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014603

REVISION NR D DTD 11/21/2022

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014622

REVISION NR D DTD 12/16/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10015317

REVISION NR B DTD 12/10/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 33492

REVISION NR B DTD 06/28/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 5-1-2754

REVISION NR F DTD 11/21/2022

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 5-1-2754

REVISION NR A DTD 10/02/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50004

REVISION NR C DTD 09/17/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50521

REVISION NR B DTD 12/03/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50804

REVISION NR B DTD 02/14/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50887

REVISION NR C DTD 12/10/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50930

REVISION NR C DTD 04/23/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50941

REVISION NR C DTD 10/30/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50942

REVISION NR E DTD 04/22/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50966

REVISION NR B DTD 02/14/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50967

REVISION NR C DTD 05/30/2019

PAGE 9 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50968

REVISION NR B DTD 12/02/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50997

REVISION NR C DTD 04/22/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51006

REVISION NR B DTD 10/30/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51012

REVISION NR B DTD 12/02/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51090

REVISION NR A DTD 07/29/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806077

REVISION NR B DTD 05/15/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806866

REVISION NR A DTD 07/29/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 808151-01

REVISION NR C DTD 06/26/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014868

REVISION NR E DTD 12/02/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014868

REVISION NR B DTD 11/25/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014637

REVISION NR A DTD 12/15/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806843-01

REVISION NR A DTD 09/17/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014883

REVISION NR D DTD 04/06/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014883

REVISION NR DTD 09/18/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806784

REVISION NR E DTD 02/19/2021

PART PIECE NUMBER:

IAW REFERENCE QAP 81361 806784

PAGE 10 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

REVISION NR DTD 09/18/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013759

REVISION NR C DTD 03/30/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10018534

REVISION NR DTD 09/14/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 808151-01

REVISION NR A DTD 05/24/2023

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 806843-01

REVISION NR DTD 09/18/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 51264

REVISION NR C DTD 09/17/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10015317

REVISION NR A DTD 09/16/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10011894

REVISION NR B DTD 08/20/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10013805

REVISION NR A DTD 04/30/2025

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014473

REVISION NR F DTD 11/15/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014600

REVISION NR E DTD 03/30/2021

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014601

REVISION NR A DTD 12/10/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014602

REVISION NR DTD 09/15/2016

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014638

REVISION NR C DTD 04/03/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014643

REVISION NR C DTD 09/06/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014659

REVISION NR B DTD 04/03/2017

PAGE 11 OF 30 PAGES

SPE8E6-27-Q-0057

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

IAW REFERENCE DRAWING NR 81361 10014685

REVISION NR D DTD 12/11/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014686

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014687

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014689

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014691

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014692

REVISION NR C DTD 04/04/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014809

REVISION NR B DTD 04/05/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014810

REVISION NR B DTD 04/05/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014818

REVISION NR B DTD 04/06/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014872

REVISION NR C DTD 04/06/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014899

REVISION NR B DTD 04/06/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 5-1-4306

REVISION NR DTD 11/16/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806356-02

REVISION NR F DTD 03/31/2026

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806438

REVISION NR C DTD 05/10/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806670-01

REVISION NR E DTD 04/14/2026

PAGE 12 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

IAW REFERENCE DRAWING NR 81361 806678-04

REVISION NR C DTD 05/10/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806879-03

REVISION NR E DTD 10/26/2021

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806880-03

REVISION NR C DTD 05/11/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806882-02

REVISION NR C DTD 05/23/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806886-03

REVISION NR E DTD 04/20/2021

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10013759

REVISION NR A DTD 08/04/2021

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014602

REVISION NR DTD 09/18/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 10014687

REVISION NR A DTD 10/10/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 81361 806356-02

REVISION NR B DTD 05/30/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806881-05

REVISION NR A DTD 11/26/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 806881-05

REVISION NR DTD 04/29/2026

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 10014637

REVISION NR A DTD 12/16/2020

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50941-16

REVISION NR D DTD 03/26/2025

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 81361 50941-18

REVISION NR C DTD 05/22/2019

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 14153 EI-016556723

REVISION NR DTD 05/04/2026

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 14153 SQAP-0166556723

REVISION NR DTD 05/05/2026

PAGE 13 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE STD NR MIL-STD-147F NOT 1

REVISION NR F DTD 09/05/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE STD NR MIL-STD-2073-1E(4) NOT 1

REVISION NR E DTD 06/27/2024

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 4240-01-655-6723 121.000 EA $ ________________ $ ________________

FACE PLATE

ASSEMBLY

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

SUPPLEMENTAL INSTRUCTIONS:

-PLACE A RED X AND THE WORDS “SHORT BOX” ON THE FRONT OF ANY BOX THAT

HAS A SHORT QUANTITY, THEN PLACE THAT BOX/BOXES WITH THE MARKINGS

SHOWING ON THE TOP FRONT OF THE PALLET LOAD.

PARCEL POST ADDRESS:

N84254

NR IMPROVEMENT PROGRAM CSF

501 WEST FELIX SUITE 401

FORT WORTH TX 76115-5000

US

SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.

FREIGHT SHIPPING ADDRESS:

N84254

NR IMPROVEMENT PROGRAM CSF

PAGE 14 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION B

SUPPLY/SERVICE: 4240-01-655-6723 CONT'D

501 WEST FELIX WHSE 10

FORT WORTH TX 76115-5000

US

M/F: (TCN) R0980852667305

RDD:

PROJ: AP5 TP 3

SUPP ADD: N84254 SIG: J

FOR GOVERNMENT USE ONLY: (IPD) 13

DIC: A4A DIST: 9B ADV: FC: 7L

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0002 0001 - S00000053 1.000 EA $ ________________ $ ________________

FOB: DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

Production Lot Testing (Contractor)

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0003 0001 - S00000062 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7016555251 0001 N/A N/A N/A 09/29/2025

0002 N/A N/A N/A N/A N/A N/A

PAGE 15 OF 30 PAGES

SPE8E6-27-Q-0057

SUPPLY/SERVICE: 0001-S00000062 CONT'D

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall -

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table *

Field Name in WAWF Data to be entered in WAWF Guidance

Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a

(SF1449)

(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

Field Name in WAWF Data to be entered in WAWF Guidance

Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)

(If blank, see resulting award)

Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)

(If blank, see resulting award)

Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)

Ship To Code SEE SECTION B (If blank, see resulting award)

Ship From Code SEE SECTION B (If blank, see resulting award)

Mark For Code SEE SECTION B (If blank, see resulting award)

Service Approver (DoDAAC)

(If blank, see resulting award)

Service Acceptor (DoDAAC)

(If blank, see resulting award)

Accept at Other DoDAAC (If blank, see resulting award)

LPO DoDAAC (If blank, see resulting award)

DCAA Auditor DoDAAC (If blank, see resulting award)

Other DoDAAC(s) (If blank, see resulting award)

(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

See administer listed on page 1

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION H - SPECIAL CONTRACT REQUIREMENTS (CONTINUED)

labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB

2026) FAR

252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN

2023) DFARS

52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (DEVIATION 2026-O0038) (FEB 2026) FAR

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND SAFETY DATA (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 23.304(a)(1), insert the following clause:

(a) Hazardous material, as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract).

(b) The Offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Safety Data Sheet submitted under this contract.

Material (If none, insert None)

Identification No.

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION I - CONTRACT CLAUSES (CONTINUED)

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.

(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.

(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.

(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to --

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

(End of Clause)

52.223-11 OZONE-DEPLETING SUBSTANCES (DEVIATION 2026-O0038) (FEB 2026) FAR

As prescribed in 23.108(d)(1), insert the following clause:

(a) Definition. As used in this clause - Ozone-depleting substance means any substance the Environmental Protection Agency designates in 40 CFR part 82 as --

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) Requirement. In accordance with 40 CFR 82.84(a)(5), the Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

Warning: Contains (or manufactured with, if applicable) * , a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEP

2014) DFARS

252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR

USE ON MILITARY INSTALLATIONS (MAR 2024) FAR

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (FEB 2024) DFARS

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM, ALT II (FEB 2024) DFARS

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS

52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024) FAR

52.232-1 PAYMENTS (APR 1984) FAR

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR

52.232-11 EXTRAS (APR 1984) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 30 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.232-25 PROMPT PAYMENT (JAN 2017) FAR

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023) FAR

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) DFARS

52.233-1 DISPUTES (MAY 2014) FAR

52.233-3 PROTEST AFTER AWARD (DEVIATION 2026-O0038) (FEB 2026) FAR

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR

52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:

(e) Governmentwide exclusion and removal orders.

(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e) (1). [Contracting Officer must select either “yes” or “no” for each of the following types of FASCSA orders:] Yes [] No [] DHS FASCSA Order Yes [] No [] DoD FASCSA Order Yes [] No [] DNI FASCSA Order

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) DFARS

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) DFARS

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (DEVIATION 2026-O0025)

(JUN 2026) DFARS

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) DFARS

252.225-7051 PROHIBITION ON ACQUISITION OF CERTAIN FOREIGN COMMERCIAL SATELLITE SERVICES (DEC 2022) DFARS

252.240-7995 PROHIBITION ON CONTRACT AWARDS WITH ENTITIES THAT CONTRACT WITH LOBBYISTS FOR CHINESE

MILITARY COMPANIES -- REPRESENTATION (DEVIATION 2026-O0025) (SEP 2026) DFARS

Standard Element ZB_240_7999 has no Title

52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION 2026-O0038) (FEB 2026)

FAR

(a) Definitions. As used in this clause -- Commercial product, commercial service and nondevelopmental item have the meanings contained in Federal Acquisition Regulation (FAR) 2.101.

Subcontract has the meaning at FAR 44.401

(b) Requirements.

(1) To the maximum extent practicable, the Contractor shall incorporate, and require its subcontractors at all tiers to incorporate, commercial products, commercial services, or non-developmental items as components of items to be supplied under this contract.

(2) If a clause in the following table is included in the contract, the Contractor shall insert the clause in subcontracts for commercial products or commercial services and must flow down the requirements of the clause to subcontracts as indicated in the specific clause:

Number Title Date 52.203-13 Contractor Code of

Business Ethics and Conduct

NOV 2021

52.203-17 Contractor Employee Whistleblower Rights

NOV 2023

52.203-19 Prohibition on Requiring Certain Internal

Confidentiality Agreements or Statements

JAN 2017

52.204-9 Personal Identity Verification of Contractor

Personnel

JAN 2011

52.219-8* Utilization of Small Business Concerns

JAN 2025

52.222-35 Equal Opportunity for Veterans

JUN 2020

52.222-36 Equal Oppurtunity for Workers with Disabilities

JUN 2020

52.222-37 Employment Reports for Veterans

JUN 2020

52.222-40 Notification of Employee Rights Under the National

Labor Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards

AUG 2018

52.222-50 Combating Trafficking in Persons

NOV 2021

52.222-50 with Alt I Combating Trafficking in Persons, with its Alternate I

MAR 2015

52.222-51 Exemption from Application of the Service Contract

Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment -

Requirements

MAY 2014

52.222-53 Exemption from Application of the Service Contract

Labor Standards to Contracts for Certain

Services - Requirements

MAY 2014

52.222-54 Employment Eligibility Verification

JAN 2025

52.222-62 Paid Sick Leave Under Executive Order 13706

JAN 2022

52.224-3 Privacy Training JAN 2017 52.224-3 with Alt I Privacy Training, with

Alternate I

JAN 2017

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 30 PAGES

SPE8E6-27-Q-0057

SECTION I - CONTRACT CLAUSES (CONTINUED)

Number Title Date 52.225-26 Contractors Performing

Private Security Functions Outside the United States

OCT 2016

52.232-40 Providing Accelerated Payments to Small

Business Subcontractors

MAR 2023

52.240-91 Security Prohibitions and Exclusions

DATE

52.240-91 with Alt I Security Requirements, with its Alternate I

DATE

52.240-92 Security Requirements DATE 52.240-92 with Alt II Security Requirements, with its Alternate II

DATE

52.247-64 Preference for Privately Owned U.S.-Flag

Commercial Vessels

NOV 2021

* Include only if the subcontract offers further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.109(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(c) Subcontracts. The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract.

252.244-7000 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (NOV 2023) DFARS

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) DFARS

252.247-7023 TRANSPORATION OF SUPPLIES BY SEA --- BASIC (OCT 2024) DFARS

Basic. As prescribed in 247.574(b) and (b)(1), use the following clause:

(a) Definitions. As used in this clause -- “Foreign-flag vessel” means any vessel that is not a U.S.-flag vessel.

“Ocean transportation” means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

“Subcontractor” means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

“Supplies” means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

“U.S.-flag vessel” means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116..

(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that --

(1) The Contractor is reselling or…