SF30_SPE8E421R00010001.PDF

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

See Block 14

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SPE8E4 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SPE8E421R0001

X

2020 NOV 09

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX is extended, is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, X is required to sign this document and return 1 copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT (METALS)

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

3. EFFECTIVE DATE

Opening/Closing Date Changed to:

2020 NOV 09 / 2021 JAN 18

TIME 4:30 PM

See Attached Continuation Sheet(s).

(X)

CHECK ONE

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 3 PAGES

SPE8E421R0001 - 0001

AMENDMENT 0001 INCLUDES THE FOLLOWING:

1. Extension to the closing date.

2. Price Evaluation List (PEL) Questions submitted by interested parties and the Government responses.

The closing date for the receipt of proposals is hereby extended to January 18, 2021 at 4:30 PM EST.

In accordance with D. INSTRUCTIONS TO OFFERORS -- PRICE PROPOSAL (Volume II) (1)(o) located on Page 70 of the Solicitation, the following clarifications to the Price Evaluation List (PEL) are hereby incorporated:

1. Item: Applicable to all PEL items Question: Do we bid exactly as the item is stated? For example, for the pipe pilings, 471015159A077 (Item #6 on PEL, Line 8), they do not include the marine grade epoxy in their description, but it is included when they order the items. Do I quote with or without the epoxy coating?

Answer: Please bid exactly as the item is stated. Therefore, using your example of Item #6 on the PEL, Line 8, a quote is requested without the epoxy coating.

2. Item: 954019045H509 (Item #1 on PEL, Line 3) ALUMINUM PLANKING - 5454-H111 FRICTION WELD PANEL, 10 EXTRUSIONS WIDE, 94.50" X 470", ABS Question: Is there a drawing available or any additional information for this item? Any clarification you can provide is greatly appreciated. Unfortunately, the LSN number hasn’t been able to point us in the right direction for the missing profile information.

Answer: Subject item is hereby removed from the PEL.

3. Item: 954013045D525 (Item #116 on PEL, Line 118) ALUMINUM, EXTRUSION, PART # 11458219 (96" LENGTHS, +.125" / -0.00") 6063-T5 QQ-A-200/9 Question 1: Might DLA be able to supply a print showing the dimensions of this extrusion?

Question 2: Unfortunately, I’ve been unable to locate drawings or catalogue references for this extrusion part, would you be able to locate any additional technical information that may be available?

Answer: The drawing is attached to this Amendment.

4. Item: 954019066H640 (Item #109 on PEL, Line 111)

ALUMINUM TEE CROSS SECTION- 6061-T6, 70MM X 4MM, 50MM X 8MM

Question: Request for print/drawing as this part # is not populating in searches on the various sites we’d use to access such dimensional clarification information, the print will ensure technical/dimensional accuracy in our quotation.

Answer: The item description is hereby revised to reflect the following: ALUMINUM TEE CROSS SECTION - 6061-T6, WIDTH

70MM X 4MM, HEIGHT 50MM X 8MM, LENGTH 10 FT

5. Item: 954019066H642 (Item #128 on PEL, Line 130)

ALUMINUM TEE CROSS SECTION - 6061-T6, 100MM X 5MM, 45MM X 8MM

Question: Request for print/drawing as this part # is not populating in searches on the various sites we’d use to access such dimensional clarification information, the print will ensure technical/dimensional accuracy in our quotation.

Answer: The item description is hereby revised to reflect the following: ALUMINUM TEE CROSS SECTION - 6061-T6, WIDTH

100MM X 5MM, HEIGHT 45MM X 8MM, LENGTH 10 FT

6. Item: 954019066H643 (Item #131 on PEL, Line 133)

ALUMINUM TEE CROSS SECTION - 6061-T6, 156MM X 6MM, 50MM X 6MM

Question: Request for print/drawing as this part # is not populating in searches on the various sites we’d use to access such dimensional clarification information, the print will ensure technical/dimensional accuracy in our quotation.

Answer: The item description is hereby revised to reflect the following: ALUMINUM TEE CROSS SECTION - 6061-T6, WIDTH

156MM X 6MM, HEIGHT 50MM X 6MM, LENGTH 10 FT

7. Item: 954011017B240 (Item #115 on PEL, Line 117) ALUMINUM, CHANNEL (EXTRUSION), 4.205" X 2.75" X .125" 6061-T6 QQ-A-200/8 (PART# SC-B-200136) Question: Unfortunately, I’ve been unable to locate drawings or catalogue references for this extrusion part, would you be able to locate any additional technical information that may be available?

Answer: The revised item description is as follows: ALUMINUM, CHANNEL (EXTRUSION), 4.205" X 2.75" X .125" 12 FT LENGTHS, 6061-T6 QQ-A-200/8 LEG - 2.750” (+-.024); INSIDE - 4.205” (+.096 -.000); THICKNESS - .125” (+-.007); ALL

INSIDE/OUTSIDE RADIUS (.010); LENGTH - 12 FT

REFERENCE: CAGE 0YZ43 ARGYLE INDUSTRIES, INC. P/N SC-B-200136

All other terms and conditions set forth in the Solicitation remain unchanged.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 3 PAGES

SPE8E421R0001 - 0001

SECTION J - LIST OF ATTACHMENTS

List of Attachments

File Name Description ATTACH_DRAWING_Item __116_on_PEL__Line_118

954013045D525 DRAWING.pdf