SPE7MX24R0001 Procurement Item Description Packaging and Marking.pdf

SPE7MX24R0001

Attachment 1 - PID, Packing and Marking

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001; NSN: 4820-00-340-0880

VALVE ASSEMBLY, AIR COMPRESSOR.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

THIS ITEM SHALL INCLUDE THE MOUNTING GASKET.

USED ON INGERSOLL-RAND COMPRESSOR MODEL

NR. N20NL-10.

REFERENCE NUMBER:CA060

CRITICAL APPLICATION ITEM

COMPRESSOR ENGINEERING CORPORATION 58430 P/N CE-MLH34646G1

COMPRESSOR ENGINEERING CORPORATION 58430 P/N MLH34646G1

CURTISS-WRIGHT ELECTRO-MECHANICAL 8FGX3 P/N MLH34646G1

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

J&A Attachment 2 – PID, Packing and Marking

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

CLIN 0002; NSN: 4820-00-341-3682

VALVE ASSEMBLY.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS241

REFERENCE NUMBER:CS199

REFERENCE NUMBER:A1202

CRITICAL APPLICATION ITEM

COMPRESSOR ENGINEERING CORPORATION 58430 P/N CE-MLH34645G1

CURTISS-WRIGHT ELECTRO-MECHANICAL 8FGX3 P/N MLH34645G1

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

CLIN 0003; NSN: 4310-01-023-4270

VALVE, DISCHARGE, COMPRESSOR. THIS ITEM SHALL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

INCLUDE THE MOUNTING GASKET.

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA060

CRITICAL APPLICATION ITEM

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

COMPRESSOR ENGINEERING CORPORATION 58430 P/N CE-MLH38249BG1

CURTISS-WRIGHT ELECTRO-MECHANICAL 8FGX3 P/N MLH38249BG1

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:A

UNIT CONT:D3 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Attachment 1 – PID, Packing and Marking

SPE7MX24R0001

J&A Attachment 2 – PID, Packing and Marking

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

REFERENCE NUMBER CS241

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND

REQUIRES ENGINEERING SOURCE APPROVAL BY THE

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

GOVERNMENT DESIGN CONTROL ACTIVITY.

REFERENCE NUMBER CS199

ALTERNATE OFFEROR REQUIREMENTS:

THE FOLLOWING DOCUMENTATION IS REQUIRED IN

ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS

AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.

(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE

IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED

INSPECTION/ACCEPTANCE CRITERIA. (C)

IDENTIFICATION OF SOURCES WHO WILL PERFORM

CRITICAL PROCESSES/OPERATIONS, INCLUDING

SOURCES OF FORGINGS AND CASTINGS. (D) IF

AVAILABLE COPIES OF PURCHASE ORDERS FROM THE

ITEM. (E) A SHOCK EXTENSION REPORT IN

ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS

SPECIFIED IN DI-ENVR-80706 IS REQUIRED.

IF THE OEM'S DETAILED DRAWINGS ARE NOT

AVAILABLE, THE OFFEROR MUST SUPPLY AN

ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW

THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,

IF REVERSE ENGINEERING WAS USED, THE COMPLETE

PROCEDURE WILL BE REPORTED INCLUDING: NUMBER

OF SAMPLES, METHODS AND MEASURES USED, ALL DATA

COMPILED, RATIONALE FOR DIMENSION TOLERANCE

DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS

SPE7MX24R0001

Attachment 1 – PID, Packing and Marking

DATA WILL BE FORWARDED TO THE ENGINEERING

SUPPORT ACTIVITY FOR EVALUATION.

REFERENCE NUMBER A1202

Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land

& Maritime Supply Chains) DSCC.cast.forge@dla.mil