PID, Packaging, and Marking.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:011496339

ADAPTER, SPLINE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS241

REFERENCE NUMBER:CS199

CRITICAL APPLICATION ITEM

Tillman Tool Company Inc 61186 P/N 81-31300-01

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES:

This national stock number and/or associated data has been determined to contain, utilize, or generate covered defense information (CDI). CDI is unclassified controlled technical information or other information, as described in the controlled unclassified information (CUI) registry that requires safeguarding pursuant to DFARS 252.204-7012.

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER CS241

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND

REQUIRES ENGINEERING SOURCE APPROVAL BY THE

GOVERNMENT DESIGN CONTROL ACTIVITY.

REFERENCE NUMBER CS199

ALTERNATE OFFEROR REQUIREMENTS:

THE FOLLOWING DOCUMENTATION IS REQUIRED IN

ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS

AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.

(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE

IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED

INSPECTION/ACCEPTANCE CRITERIA. (C)

IDENTIFICATION OF SOURCES WHO WILL PERFORM

CRITICAL PROCESSES/OPERATIONS, INCLUDING

SOURCES OF FORGINGS AND CASTINGS. (D) IF

AVAILABLE COPIES OF PURCHASE ORDERS FROM THE

ITEM. (E) A SHOCK EXTENSION REPORT IN

ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS

SPECIFIED IN DI-ENVR-80706 IS REQUIRED.

IF THE OEM'S DETAILED DRAWINGS ARE NOT

AVAILABLE, THE OFFEROR MUST SUPPLY AN

ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW

THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,

IF REVERSE ENGINEERING WAS USED, THE COMPLETE

PROCEDURE WILL BE REPORTED INCLUDING: NUMBER

OF SAMPLES, METHODS AND MEASURES USED, ALL DATA

COMPILED, RATIONALE FOR DIMENSION TOLERANCE

DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS

DATA WILL BE FORWARDED TO THE ENGINEERING

SUPPORT ACTIVITY FOR EVALUATION.