CM19141001_Procurement_Item_Descriptions.docx

LTC Project CM19140001 - PID

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001: NSN 4710-00-142-3010

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

0.500 IN.OD,

0.035 IN. WALL THK,

TEMPER T6,

LG. 8 FT TO 12 FT RANDOM

TEST REPORTS IN ACCORDANCE WITH PARA 4.5 ARE REQUIRED

USED ON BOEING VERTOL CARGO TRANSPORT HELICOPTER, MODEL CH-47.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

REVISION NR L DTD 11/01/2012

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

REFERENCE NUMBER:CS260

CLIN 0002: NSN 4710-00-202-9731

TUBE, METALLIC. STEEL-CRES.,TYPE 1,PLAIN ENDS,0.250 IN. OD., 0.035 IN.

WALL THK.

or Welded Hydralic Tubing 19Cr-10Ni (SAE 30304)Solution Heat Treated"

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZLGTH

REFERENCE NUMBER:CS118

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS127

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS5567

REVISION NR F DTD 12/01/2015

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-T-8504B NOT 3

REVISION NR B DTD 10/02/2018

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. EACH MASTER

LIFT SHALL BE LIMITED TO 2000 LBS. GROSS

WEIGHT. WHEN A PRESERVATIVEIS REQUIRED

USE TYPE B OR C IAW TABLE 1AS APPLICABLE.

REFERENCE NUMBER:CS258

CLIN 0003: NSN 4710-00-274-3993

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

EXCEPTION DATA: USE SAE AMS 4083K ILO MIL-T-7081.

TUBE,ALUMINUM...0.375 IN OD,0.028 IN WALL THK,

10 FT THROUGH 12 FT RANDOM LENGTH, TEMPER T6.

MAXIMUM OPERATING PRESSURE 3000.0 POUNDS PER SQUARE INCH

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

REVISION NR L DTD 11/01/2012

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD E-MAIL TO POST AWARD

REVISION NR DTD 04/27/2010

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:CS260

CLIN 0004: NSN 4710-00-277-4653

TUBE, METALLIC. COPPER ALLOY MATERIAL(90-10)<(>,<)>

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

0.540 INCH O.D., 0.065 INCH WALL THICKNESS<(>,<)>

ANNEALED, MILL LENGTHS, PER MILITARY

SPECIFICATION TITLED: "TUBE, COPPER-NICKEL ALLOY

, SEAMLESS AND WELDED (COPPER ALLOY NUMBERS 715

AND 706)".

IDENTIFICATION MARKING REQUIRED.

MAXIMUM OPERATING PRESSURE 200.0 POUNDS PER SQUARE INCH

144.000 INCHES MINIMUM RANDOM AND 300.000 INCHES MAXIMUM RANDOM

TABLE

REFERENCE NUMBER:CS187

REFERENCE NUMBER:C0005

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD080

IAW BASIC SPEC NR MIL-T-16420K(1)

REVISION NR 1 DTD 09/16/1988

PART PIECE NUMBER: 1 CLASS 200 GRADE 1

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS271

CLIN 0005 NSN 4710-00-277-4663

TUBE, METALLIC

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

COPPER ALLOY MATERIAL(90-10), 4 INCH O.D., 0.095

INCH WALL THICKNESS, ANNEALED, 1 TYPE/1 GRADE, 200

CLASS AND 90-10 COMPOSITION. 12 FT MINIMUM AND 20

FT MAXIMUM RANDOM LENGTHS, PER MILITARY

SPECIFICATION TITLED: "TUBE, COPPER-NICKEL ALLOY,

SEAMLESS ANDWELDED (COPPER ALLOY NUMBERS 715 AND 706)".

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CA070

IAW BASIC SPEC NR MIL-T-16420K(1)

REVISION NR 1 DTD 09/16/1988

PART PIECE NUMBER: TYPE 1, GRADE 1, CLASS 200

IAW REFERENCE QAP 13873 CDRL-COQC-19071

REVISION NR DTD 03/12/2019

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS271

CLIN 0006: NSN 4710-00-277-8704

PIPE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

NOMINAL PIPE SIZE: 3/4 INCHES, 0.113 INCH WALL

THICKNESS; 1.050 INCH O.D. BLACK FINISH<(>,<)>

S TYPE AND B GRADE AND STANDARD SCHEDULE 40.

16 FEET TO 22 FEET LENGTHS

PER ASTM TITLE STANDARD SPECIFICATION FOR PIPE<(>,<)>

STEEL, BLACK AND HOT-DIPPED, ZINC-COATED<(>,<)>

WELDED AND SEAMLESS.

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:CSA08

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA070

IAW BASIC NON GOVT STD ASTM A53/A53M

REVISION NR DTD 03/01/2012

PART PIECE NUMBER: S GRADE B

IAW REFERENCE DRAWING NR 16236 4710V0833

REVISION NR DTD 06/15/1995

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0007: NSN 4710-00-277-8709

PIPE,METALLIC

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

STEEL MATERIAL<(>,<)>

2-1/2 INCH NOMINAL PIPE SIZE<(>,<)>

0.203 INCH WALL THICKNESS<(>,<)> 2.875 IN OD

BLACK<(>,<)>

SEAMLESS<(>,<)>

PLAIN ENDS<(>,<)>

16 TO 22 FEET RANDOM LENGTHS<(>,<)>

BEVELED ENDS<(>,<)>

ASTM A53<(>,<)>

S TYPE AND B GRADE AND STD SCHEDULE.

"NO TEMPERING OR NORMALIZING REQUIRED"

PER AMERICAN SOCIETY FOR TESTING

AND MATERIALS STANDARD TITLED: "PIPE, STEEL<(>,<)>

BLACK AND HOT-DIPPED, ZINC-COATED WELDED AND

SEAMLESS".

REFERENCE NUMBER:CSA08

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

IAW BASIC NON GOVT STD ASTM A53/A53M-2012

REVISION NR DTD 03/01/2012

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0008: NSN 4710-00-278-3292

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

CRES, 0.049 IN. NOMINAL WALL THICKNESS, 1/4 IN. O.D.,

SEAMLESS, 5-20 FT.

RANDOM LENGTHS. PER SAE AMS-T-6845A TITLED:

TUBING, STEEL CORROSION-RESISTANT, (S30400),

AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION".

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-T-6845B

REVISION NR B DTD 07/01/2013

PART PIECE NUMBER: 1 (ONE)

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0009: NSN 4710-00-278-3300

TUBE,METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

CRES,

0.065 IN. NOMINAL WALL THICKNESS,

1/2 IN. OD,

SEAMLESS,

MEASURING METHOD AND LENGTH 60.000 INCHES MINIMUM

RANDOM AND 240.000 INCHES MAXIMUM RANDOM

INDUSTRIAL SPEC TITLED; "TUBING, STEEL,

CORROSION-RESISTANT (30400), AEROSPACE VEHICLE

HYDRAULIC SYSTEM 1/8 HARD CONDITION".

END ITEM: AIRCRAFT HYDRAULIC SYSTEMS.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-T-6845B

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA MASTER LIFT SHALL BE LIMITED TO 2000

LBS GR WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0010: NSN 4710-00-278-3305

TUBE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

USED ON THE A10 AIRCRAFT.

0.035 IN. NOMINAL WALL THICKNESS, 0.625 INCH NOMINAL DIAMETER, TYPE

1-SEAMLESS, RANDOM LENGTH 5 FEET MINIMUM TO 20 FEET MAXIMUM.

AEROSPACE MATERIAL SPECIFICATION TITLED:

Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS118

REFERENCE NUMBER:ZD025

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-T-6845B

PART PIECE NUMBER: 1, CLASS 3

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0011: NSN 4710-00-278-6402

TUBE,METALLIC

ALUMINUM ALLOY MAT'L

3/8 IN. OD

.028 IN. WALL THK.

10 FT. TO 12 FT. RANDOM LG.

PLAIN ENDS<(>,<)>

TEMPER O. TYPE 1<(>,<)>

I/A/W SAE SPEC TITLED;

"TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 5052".

INCLUDE CONTRACT NUMBER, MFR CAGE CODE, SPEC<(>,<)>

TEMPER, DIMENSIONS, AND NSN EVERY 3 FEET.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

PAR 6.2; SUBPAR D,E,F,H,AND ARE NOT

APPLICABLE. J AS SPECIFIED IN THE PROCUREMENT

DOCUMENT. MULTIPLICATION.

REFERENCE NUMBER:CS098

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-WW-T-700/4B (R2018)

REVISION NR B DTD 01/01/2018

PART PIECE NUMBER: AMS-WW-T-700/4-T0-0.375X0.028

IAW REFERENCE NON GOVT STD SAE AMS-WW-T-700A

REVISION NR A DTD 09/01/2007

LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:CS260

CLIN 0012: NSN 4710-00-278-7859

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

COPPER ALLOY 70-30, 0.625 IN OD, 0.049 IN MINIMUM WALL

THICKNESS, ANNEALED

20 FT LENGTHS

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA070

EXCEPTIONS TO MIL-T-15005F;

PARA 3.4; EDDY CURRENT AND HYDROSTATIC TESTS ARE

REQUIRED. PARA 3.7; TUBE SHALL BE MARKED WITH "LOT"

NUMBER IN LIEU OF "HEAT" NUMBER. PARA 4.2.5; DELETE

"(SEE 4.5)" , AND SUBSTITUTE "(SEE 4.4)".

PARA 4.5; TABLE III; DELETE "PNEUMATIC TEST"

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CSF16

REFERENCE NUMBER:RQ027

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-T-15005F

REVISION NR F DTD 12/06/1989

LINE ITEM 00012 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:A

UNIT CONT:E5 OPI:M

INTRMDTE CONT:E8 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CLIN 0013: NSN 4710-00-287-1152

Tube, Metallic

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

steel, 2.00 in. OD, 0.312 in. wall thickness, plain ends, 5.0 to 20.0 ft. random lengths, per spec titled:

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved - UNS G41300

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

IAW BASIC NON GOVT STD SAE AMS6360

REVISION NR N DTD 05/31/2018

LINE ITEM 00013 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

WRAP ENDS WITH CARDBOARD OR OTHER NON CORROSIVE

MATERIAL TO PREVENT ENTRY OF FOREIGN MATTER.

CLIN 0014: NSN 4710-00-289-2781

TUBE, METALLIC.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

ALUMINUM ALLOY 6061, T-6<(>,<)>

SEAMLESS<(>,<)>

OUTSIDE DIAMETER 0.250 INCHES<(>,<)>

WALL THICKNESS: 0.035 INCHES<(>,<)>

RANDOM LENGTHS 10-12 FEET<(>,<)>

MAXIMUM OPERATING PRESSURE 3000.0 POUNDS PER SQUARE INCH<(>,<)>

T-6 SOLUTION HEAT TREATED AND ARTIFICIALLY AGED<(>,<)>

PER ASTM TITLED: ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN,

ROUND 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND

PRECIPITATION HEAT TREATED - REF. UNS 96061.

REFERENCE NUMBER:ZD080

USE SAE AMS 4083 I/L/O SAE AMS-T-7081.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CQA01

REFERENCE NUMBER:RQ027

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

LINE ITEM 00014 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:CS260

CLIN 0015: NSN 4710-00-289-3036

TUBE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

ALUMINUM ALLOY 6061, T6, SEAMLESS, 1.000 IN.OD, 0.049 IN. WALL

THK,8 THROUGH 16 FT.RANDOM LG, PLAIN ENDS.

IN ACCORDANCE WITH SAE AMS SPEC TITLED: TUBE, ALUMINUM ALLOY, DRAWN,

SEAMLESS, 6061. TYPE 1.

CURRENT SPECIFICATION IS SAE-AMS-WW-T-800/6C

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CS178

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE-AMS-WW-T-700/6B

REVISION NR B DTD 03/01/2011

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD SAE AMS-WW-T-700

LINE ITEM 00015 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:10

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ASTM B660

PACKAGING SHALL BE IAW ASTM-B-660.

CLIN 0016: NSN 4710-00-289-7995

TUBE, METALLIC

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

COPPER NICKEL ALLOY (715) COMPOSITION 70-30, 2-7/8 INCH O.D., CLASS 200,

SEAMLESS, TYPE I, 0.083 IN. WALL THICKNESS, ANNEALED, 12-25 FEET RANDOM

LENGTHS, ROUND, GRADE 1. IAW MIL SPEC ENTITLED "TUBE, COPPER-NICKEL

ALLOY, SEAMLESS AND WELDED (COPPER ALLOY NUMBERS 715 AND 706.)"

... IDENTIFICATION MARKING REQUIRED ...

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:RQ027

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-T-16420K(1)

REVISION NR 1 DTD 09/16/1988

PART PIECE NUMBER: TYPE1 CLASS200 GRADE1

LINE ITEM 00016 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS271

CLIN 0017: NSN 4710-00-443-4773

TUBE, METALLIC.

COMP 1045, SEAMLESS, COLD DRAWN, PLAIN ENDS<(>,<)>

OUTSIDE DIAMETER 0.750 INCHES NOMINAL, WALL

THICKNESS 0.049 INCHES NOMINAL. 5 FT MINIMUM

AND 20 FT MAXIMUM RANDOM LENGTHS. PASSIVATE

INSIDE AND OUTSIDE, OUTSIDE POLISHED. PER

AMS SPECIFICATION TITLED: "TUBING, STEEL<(>,<)>

CORROSION-RESISTANT (S30400), AEROSPACE

VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION."

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CRE01

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-T-6845B

LINE ITEM 00017 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

EXCEPTION: STD PIPE SIZE 1.5 & SMALLER DO

NOT REQUIRE BUNDLING. EACH MASTER LIFT

WILL BE LIMITED TO 2000 LB. GR. WT. WHEN

PRESERVATIVE IS REQUIRED USE TYPES B OR C

IAW TABLE 1 AS APPLICABLE.

REFERENCE NUMBER:CS258

CLIN 0018: NSN 4710-00-507-7649

TUBE, METALLIC, ALUMINUM ALLOY.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

1 INCH HIGH, 1 INCH WIDE, 1/8 INCH WALL THK.

12 ft lengths, WITH ROUND CORNERS.

IAW FED SPEC ENTITLED "TUBE, ALUMINUM ALLOY<(>,<)>

DRAWN, SEAMLESS, 6061."

REFERENCE NUMBER:CS178

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-WW-T-700/6C

REVISION NR C DTD 09/01/2015

LINE ITEM 00018 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ASTM B660

PACKAGING SHALL BE IAW ASTM-B-660.

CLIN 0019: NSN 4710-00-516-4831

TUBE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

CRES, 0.049 IN. NOMINAL WALL THICKNESS, 0.375 IN. DIA., SEAMLESS, 60 TO

240 IN RANDOM LENGTH. PASSIVATE INSIDE AND OUTSIDE, OUTSIDE POLISHED.

3000.0 POUND PER SQAURE INCH

PER AEROSPACE MATERIAL SPECIFICATION TITLED: "TUBING, STEEL,

CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8

HARD CONDITION ".

REFERENCE NUMBER:C0005

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

CERTIFICATE OF QUALITY COMPLIANCE APPLIES -

DLAR 52.246-9000

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-T-6845B

LINE ITEM 00019 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:BLK

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

CLIN 0020: NSN 4710-00-542-2904

PIPE, METALLIC

ALUMINUM ALLOY

0.750 INC NOM PIPE SIZE<(>,<)>

0.113 IN WALL THK;

1.050 IN. OD.

16 FT THROUGH 20 FT RANDOM LG

TEMPER H32<(>,<)>

TYPE 1<(>,<)>

PLAIN ENDS<(>,<)>

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:C0005

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RQ027

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-WW-T-700/5

REVISION NR B DTD 02/01/2018

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD SAE AMS-WW-T-700

LINE ITEM 00020 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS260

CLIN 0021: NSN 4710-00-542-2905

PIPE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

ALUMINUM ALLOY 5086<(>,<)>

1.000 INCH NORMINAL PIPE SIZE<(>,<)>

0.133 INCH WALL THK, 1.315 IN. OD

16 TO 20 FEET RANDOM LENGTH<(>,<)>

PLAIN ENDS,SEAMLESS

H32 TEMPER<(>,<)>

TYPE 1-ROUND.

PER AEROSPACE MATERIAL SPECIFICATION TITLED: "TUBE, ALUMINUM ALLOY,

DRAWN, SEAMLESS, 5086."

END ITEM: POSEIDON SUBMARINE.

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS118

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS-WW-T-700/5

REVISION NR B DTD 02/01/2018

LINE ITEM 00021 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

REFERENCE NUMBER:CS260

CLIN 0022: NSN 4710-00-604-7978

TUBE, METALLIC.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

COPPER ALLOY 200 CLASS, 90-10 COMPOSITION, 1 GRADE, 1 TYPE, SEAMLESS,

ROUND, ALLOY MATERIAL(90-10), 3-1/2 INCH O.D.,

0.095 INCH WALL THICKNESS, ANNEALED, MILL LENGTHS, MAXIMUM OPERATING

PRESSURE 200.0 POUNDS PER SQUARE INCH, 144.000 INCHES MINIMUM RANDOM AND

300.000 INCHES MAXIMUM RANDOM LENGTHS.

PER MILITARY SPECIFICATION TITLED: "TUBE,

COPPER-NICKEL ALLOY, SEAMLESS AND WELDED

COPPER ALLOY NUMBERS 715 AND 706)".

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

IDENTIFICATION MARKING REQUIRED.

REFERENCE NUMBER:CS187

A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9001:2008 PARAGRAPHS

APPLIES:

4.2.4: CONTROL OF DOCUMENTS FOR INSPECTION AND TESTING AS WELL AS

APPLICABLE DRAWINGS SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY THE

CONTRACT

7.4.2.A: PURCHASING OF MATERIAL AND REQUIREMENTS FOR APPROVAL OF PRODUCT

7.5.4: CUSTOMER PROPERTY (CUSTOMER SUPPLIED PRODUCT OR MATERIAL)

7.5.3: PRODUCT IDENTIFICATION AND TRACEABILITY

7.5.1 AND 8.2.4: CONTROL OF PRODUCTION AND SERVICE PROVISIONS /

MONITORING AND MEASUREMENT OF PRODUCT

7.6: CONTROL OF MONITORING AND MEASURING EQUIPMENT 7.5.1, 7.5.3, AND

8.2.4: CONTROL, IDENTIFY AND MONITOR PRODUCT, PRODUCT DOCUMENTATION AND

INSPECTION ACTIVITIES STATUS

8.3: CONTROL OF NON-CONFORMING PRODUCT

8.5.2 AND 8.5.3: CORRECTIVE AND PREVENTATIVE ACTIONS

4.2.4: CONTROL OF RECORDS

FAR CLAUSE 52.246-11 APPLIES

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CQ030

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CSA05

REFERENCE NUMBER:CSS01

REFERENCE NUMBER:RQ027

IAW BASIC SPEC NR MIL-T-16420K(1)

REVISION NR 1 DTD 09/16/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 4710V0833

LINE ITEM 00022 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS271

CLIN 0023: NSN 4710-00-604-8366

Tube, Metallic copper alloy (70-30), 5.563 in. OD, 0.125 in. wall thickness annealed, 10 - 18 ft. random length

REFERENCE NUMBER:CS001

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:C0005

REFERENCE NUMBER:RQ001

- Tailored ISO (excluding paragraph 7.3)

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:ZD064

-Certificate of Quality Conformance- Each certificate shall be prepared in accordance with:

MIL-T-16240K with amendment 1; paragraph 4.5

REFERENCE NUMBER:ZM008

REFERENCE NUMBER:RQ027

REFERENCE NUMBER:CS187

-12/17-

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-T-16420K(1)

REVISION NR 1 DTD 09/16/1988

PART PIECE NUMBER: 1, CLASS 200, GRADE 1

IAW REFERENCE DRAWING NR 16236 4710V0833

REVISION NR DTD 06/15/1995

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-19071

REVISION NR DTD 03/12/2019

LINE ITEM 00023 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS271

CLIN 0024: NSN 4710-00-640-6005

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:R1200

REFERENCE NUMBER:ZD080

TUBING MATERIAL ALUMINUM ALLOY 6061-T6, CONSTRUCTION

SEAMLESS. TUBE OUTSIDE DIAMETER 1.000 INCHES NOMINAL<(>,<)>

WALL THICKNESS 0.065 INCHES NOMINAL. MEASURING METHOD

12 FT NOMINAL SPECIFIC LENGTH.

PER AEROSPACE MATERIAL SPECIFICATION TITLED:

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

NOTE:

TEST REPORTS IN ACCORDANCE WITH PARA 4.5 ARE REQUIRED.

REFERENCE NUMBER:CS127

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

PART PIECE NUMBER: AMS-T-7081/T6-.065INX1.0INX12F

LINE ITEM 00024 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CLIN 0025: NSN 4710-00-684-5074

Tube, Metallic aluminum alloy 6061, T6, seamless

0.375 in. OD, 0.035 in. wall thickness

REFERENCE NUMBER:CA070

REFERENCE NUMBER:R1200

REFERENCE NUMBER:RA001

REFERENCE NUMBER:CS127

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

- Tailored ISO (excluding paragraph 7.3)

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

-01/18-

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

PART PIECE NUMBER: TEMPER T-6

LINE ITEM 00025 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

UNIT OF ISSUE LG (LENGTH),

CONTAINS 12 FEET.

REFERENCE NUMBER:CS260

CLIN 0026: NSN 4710-00-726-2169

Tube, Metallic

CRES, 3/8 in. OD, 0.035 in. wall thickness, seamless type 1, cold drawn, outside polished, plain ends 10-20 ft. random lengths

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

- Tailored ISO (excluding paragraph 7.3)

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

-02/18-

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS5566

REVISION NR M DTD 09/01/2011

LINE ITEM 00026 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0027: NSN 4710-00-892-5914

PIPE, CARBON STEEL.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

1-1/2 IN. NOM. PIPE SIZE, SCHEDULE 40, SEAMLESS, 0.145 IN. WALL THK.,

1.900 IN. OD., B GRADE, 20 TO 24 FT. RANDOM LG., PLAIN ENDS. PER ASTM

TITLED: "STANDARD SPECIFICATION FOR SEAMLESS CARBON STEEL PIPE FOR

HIGH-TEMPERATURE SERVICE".

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CSA08

REFERENCE NUMBER:CSS01

REFERENCE NUMBER:CA070

IAW BASIC NON GOVT STD ASTM A106/A106M

REVISION NR M DTD 11/01/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 4710V0833

LINE ITEM 00027 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0028: NSN 4710-00-993-0482

TUBE, METALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

ALUMINUM ALLOY 6061, ROUND, WALL THICKNESS 0.022 INCHES NOMINAL<(>,<)>

PLAIN ENDS, DIAMETER 0.250 INCHES NOMINAL, SEAMLESS, 144.000 INCHES

NOMINAL SPECIFIC LENGTH, T-6 SOLUTION HEAT TREATED AND ARTIFICIALLY

AGED. PER SAE AMS SPECIFICATION TITLED:

TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN, 6061, AIRCRAFT HYDRAULIC

QUALITY

REFERENCE NUMBER:R1200

REFERENCE NUMBER:ZD080

EXCEPTION TO CITED SPECIFICATION: THE INFORMATION REQUIRED ON EACH OF

THE LARGEST DIAMETER TUBE COVERED BY THIS SPECIFICATION SHALL BE

FURNISHED WITH EACH TUBE SUPPLIED FOR THIS ITEM.

WHEN IT IS NOT POSSIBLE FOR THE SUPPLIER TO DO THIS USING CONTINUOUS

MARKING AS REQUIRED FOR THE LARGEST DIAMETER TUBE COVERED BY THIS

SPECIFICATION, THIS SHALL BE DONE BY APPLYING AN

ADHESIVE-BACKED IDENTIFICATION LABEL.

EA TUBE SHALL BE FLARE TESTED IAW AMS-T-7081

PARA. 4.4.3.4.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD AMS 4081J/4083

REVISION NR DTD 09/01/2007

LINE ITEM 00028 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:A

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ASTM B660

PACKAGING SHALL BE IAW ASTM-B-660.

CLIN 0029: NSN 4710-00-993-5036

PIPE. CARBON STEEL. 1/2 IN. NOM PIPE SIZE,

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

SCHEDULE 40, SEAMLESS, 16 TO 22 FT. RANDOM LG.,

PLAIN ENDS, ASTM STD TITLED: "SEAMLESS CARBON

STEEL PIPE FOR HIGH TEMPERATURE SERVICE";

REFERENCE NUMBER:CS187

REFERENCE NUMBER:C0005

REFERENCE NUMBER:CSA08

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CSA05

REFERENCE NUMBER:CSS01

REFERENCE NUMBER:RQ027

IAW BASIC NON GOVT STD ASTM A106/A106M-14

REVISION NR DTD 06/01/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 4710V0833

LINE ITEM 00029 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.OPEN ENDS SHALL BE WRAPPED WITH

NON CORRROSIVE PROTECTIVE MATERIALS TO PREVENT ENRTY OF FOREIGN MATTER.

CLIN 0030: NSN 4710-01-097-0328

TUBE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:R1207

REFERENCE NUMBER:ZD080

PLAIN ROUND, SEAMLESS, 3000.0 POUNDS PER SQUARE INCH

0.375 INCH OD, 0.035 INCH WALL THK, 6 FT. LG.

6061 ALLOY 6 TEMPER

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC NON GOVT STD SAE AMS4083

LINE ITEM 00030 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:A

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

QUP SHALL BE BULK FOR CONTRACT SP0740-04-

V-8354 WITH SHIPMENTS TO DDSP, DDJC AND

DDDC. VJ SHALL APPLY PLASTIC/METAL TAGS

WITH IDENTIFICATION MARKINGS TO 10 PER

CENT OF THE LOAD.

REFERENCE NUMBER:CS260

CLIN 0031: NSN 4710-01-102-6421

TUBE CORROSION RESISTANT STEEL. 3/8 IN. OD,

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

0.035 IN. WALL THK, 12 FT. LG, MIL SPEC

TITLED, "TUBING, STEEL, CORROSION-RESISTANT

(18-8 STABILIZED), AIRCRAFT HYDRAULIC QUALITY".

U/ON F-16 AIRCRAFT.

REFERENCE NUMBER:R1200

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-T-8808B NOT 5

REVISION NR DTD 08/07/2000

LINE ITEM 00031 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

EXCEPTION: STD PIPE 1.5 IN. AND SMALLER

DOES NOT REQUIRE BUNDLING. LARGER PIPE

SHALL REQUIRE A SUITABLY SECURED BUNDLE.

EA. MASTER LIFT SHALL BE LIMITED TO 2000

LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.

CLIN 0032: NSN 4710-01-189-3106

TUBE, METALLIC.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

ALUMINUM-ALLOY 6063

T52 TEMPER

2.000 IN. BY 2.000 IN. SQUARE TUBE

0.125 IN. WALL THK

10 TO 12 FT. RANDOM LG

SEAMLESS

SHARP EDGES

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:CA070

IAW BASIC NON GOVT STD ASTM B221

REVISION NR DTD 10/01/2014

LINE ITEM 00032 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:BLK PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS260

CLIN 0033: NSN 4710-01-230-0826

TUBE, METALLIC, STEEL; 1.00 IN. OD. 0.095 IN.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

WALL THK., 12 FT. LG., PLAIN-ENDS, SEAMLESS.

IAW MIL SPEC TITLED "TUBING,STEEL, CORROSION-

RESISTANT (304), AEROSPACE VEHICLE HYDRAULIC

SYSTEMS, ANNEALED, SEAMLESS AND WELDED."

REFERENCE NUMBER:CS092

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-T-8504B NOT 3

REVISION NR DTD 10/02/2018

LINE ITEM 00033 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:BLK

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER CS260

"PRESERVATION & PACKAGING SHALLBE

I/A/W THE LATEST REVISION OF ASTM B660,

FOR ALUMINUM & MAGNESIUM ITEMS."

"WHEN ZZ IS THE METHOD OF PRESERVATION, USE

LEVEL "A" PRESERVATION AS CITED IN THE

COMMODITY SPECIFICATION."

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ZLGTH

If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement.

If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable.

Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information.

If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence.

REFERENCE NUMBER CS118

FULL AND OPEN COMPETITION APPLIES.

REFERENCE NUMBER CS127

"SUPPLEMENTARY REQUIREMENT APPLIES FOR

CONTINUOUS IDENTIFICATION MARKING I/A/W

SAE-AMS-STD-185. BUNDLE TAGGING IS NOT PERMITTED."

REFERENCE NUMBER CS258

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF FEDERAL

SPECIFICATION MIL-S-163, FOR STEEL MILL

PRODUCTS."

"WHEN ZZ IS THE METHOD OF PRESERVATION, USE

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER C0005

"THIS ITEM HAS BEEN INCLUDED IN THE NAVY'S

INDUSTRIAL MATERIAL IMPROVEMENT PROGRAM.

MARKING IS REQUIRED IN ADDITION TO THAT

CALLED OUT IN THE PROCUREMENT SPECIFICATION.

THE FOLLOWING INFORMATION IS TO BE CONTINUOUSLY

MARKED EVERY THREE FEET ON EACH LENGTH OF

MATERIAL.

1. PRODUCER'S NAME AND TRADEMARK

2. SPECIFICATION

3. COMPOSITION/TEMPER (WHEN APPLICABLE: GRADE,

TYPE, ALLOY, CLASS, TEMPER, ETC.)

4. SIZE (O.D. OR NPS AND WALL THICKNESS OR

SCHEDULE).

5. CONTRACT NUMBER

6. NATIONAL STOCK NUMBER

7. "S" FOR SEAMLESS OR "W" FOR WELDED

8. HEAT NUMBER OR LOT NUMBER

WHEN MARKING IS APPLIED BY A SUPPLIER OR CUT

INTO SHORTER LENGTHS FOR RESALE THE NAME OR

TRADEMARK OF THE SUBSEQUENT PROCESSOR SHALL BE

INCLUDED IN THE MARKING."

REFERENCE NUMBER CS271

"PRESERVATION AND PACKAGING SHALL BE

I-A-W THE LATEST REVISION OF FEDERAL

SPECIFICATION MIL-C-3993, COPPER."

"WHEN ZZ IS THE METHOD OF PRESERVATION, USE

REFERENCE NUMBER ZD054

CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,

UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.

REFERENCE NUMBER CSA08

ASTM..................CODE: 81346

AMERICAN SOCIETY FOR TESTING AND MATERIALS

1916 RACE STREET

PHILADELPHIA PA 19103

TELEPHONE: 610-832-9500

TELEFAX: 610-832-9555

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER CS098

"CONTINUOUS PRODUCT MARKING IS REQUIRED"

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER CSF16

"THE FOLLOWING EXCEPTIONS APPLY TO MIL-T-15005F;

(1) BOTH EDDY CURRENT AND HYDROSTATIC TESTS ARE

REQUIRED, EXCEPT EDDY CURRENT TESTING WAVED IF

ULTRASONIC OR LIQUID PENETRANT INSPECTION IS

PERFORMED;

(2) LOT NUMBER MAY BE SUBSTITUTED FOR HEAT

NUMBER ON BARE ITEM MARKING;

(3) PNEUMATIC TESTING IS NOT REQUIRED;

(4) TUBING MUST COMPLY WITH WORKMANSHIP, FINISH

AND APPEARANCE REQUIREMENTS OF ASTM B111."

REFERENCE NUMBER RQ027

A. Data required by this document will be included in the price of the procured item(s).

B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).

C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.

D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained.

E. No Certificate of Conformance (COC) or alternate release is authorized.

End of Requirement

REFERENCE NUMBER CQA01

QUALITY ASSURANCE PROVISION

REFERENCE NUMBER CS178

"CONTINUOUS PRODUCT MARKING IS REQUIRED

REGARDLESS OF SIZE. IN EXCEPTION TO

WW-T-700/6, LOT NUMBER SHALL ALSO BE

MARKED CONTINUOUSLY ON EACH LENGTH OF

TUBING IN THE T6 TEMPER."

REFERENCE NUMBER CRE01

"REFERENCE MATERIAL-INCLUDES HANDBOOKS,

MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES,

BOOKS, ETC."

REFERENCE NUMBER CQ030

DOD REQUIRES ORIGIN INSPECTION VALIDATION

REFERENCE NUMBER CSA05

ANSI...................CODE: 80204

AMERICAN NATIONAL STANDARDS INSTITUTE

11 WEST 42ND STREET 13TH FLOOR

NEW YORK NY 10036

TELEPHONE: 212-642-4900

TELEFAX:212-302-1286

REFERENCE NUMBER CSS01

SPECIFICATION

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER ZM008

If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract.

REFERENCE NUMBER R1200

1 LG = 12 FT

REFERENCE NUMBER R1207

1 LG = 6 FT

REFERENCE NUMBER CS092

"PARAGRAPH 4.1.1 DOES NOT APPLY TO THIS ITEM."