SPE7M227Q0042.pdf

PDF 176 KB Posted Oct 28, 2026

Attached to: SHEAVE ASSEMBLY and 4 more items
Solicitation number: SPE7M227Q0042
Issued by: Defense Logistics Agency Land and Maritime

View the file

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE7M2-27-Q-0042

1. REQUEST NO.

2026 OCT 27

2. DATE ISSUED

7018377073

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA WEAPONS SUPPORT

NUCLEAR REACTOR PROGRAM

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Buyer: Victoria Payne PLCL58Z Tel: 614-693-9911 Fax: 000-000-0000 Email: Victoria.Payne@dla.mil

SEE SCHEDULE

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 05

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 32 PAGES

SPE7M2-27-Q-0042

*************PLEASE READ THE FOLLOWING CAREFULLY****************

*******NOTE TO CONTRACTORS********

****THIS IS AN AIRCRAFT LAUNCH RECOVERY EQUIPMENT (ALRE) ITEM****

****CRITICAL APPLICATION ITEM (CAI)****

NSN# 1720-004841514

NOMENCLATURE: SHEEVE ASSEMBLY

PART NUMBER: 509322-2R

IN SUPPORT AND PREPARATION OF THIS SOLICITATION FOR THIS ALRE ITEM, TDR NO. 26-12107 WAS USED.

FOB: ORIGIN

INSPECTION/ACCEPTANCE: ORIGIN

*******************************NOTE************************************

**CONTRACTORS MUST BE EJCP CERTIFIED TO DOWNLOAD EXPORT CONTROLLED DRAWINGS**

NOTE THAT EJCP EXPIRES IN 3 YEARS FROM DATE OF CERTIFICATION. CHECK TO ENSURE THAT EJCP HAS NOT EXPIRED. THIS IS A

REQUIREMENT BASED ON EXPORT DRAWINGS.

SURPLUS IS NOT ACCEPTABLE FOR CAI ITEMS AND ANY SURPLUS OFFER WILL NOT BE EVALUATED.

PLEASE NOTE IN THE SOLICITATION THERE ARE ADDITIONAL LINE ITEMS BEGINNING WITH “S0…”. THESE LINES COINCIDE WITH THE “CONTRACT DATA REQUIREMENTS LIST” (CDRLS) FOUND IN THE TECH DOC BIDSET DOWNLOADABLE FROM DIBBS.

THE CDRLS WILL BECOME DELIVERABLES AT TIME OF AWARD AND WILL BE ATTACHED BY THE BUYER.

THE TECHNICAL DOCUMENTS FOR THIS SOLICITATION MUST BE DOWNLOADED AND REVIEWED PRIOR TO SUBMISSION OF QUOTES/OFFERS. A

POST AWARD SURVEY MAY BE REQUIRED FOR UNDERSTANDING OF THE REQUIREMENTS.

CLIN (CDRL) 0002 – S00000053 – CONTRACTOR FIRST ARTICLE TESTING (KFAT)

CLIN (CDRL) 0003 – S00000046 – PRODUCTION TEST & INSPECTION REPORT (PTI)

CLIN (CDRL) 0004 – S00000046 – CERTIFICATE OF QUALITY COMPLIANCE (COQC)

CLIN (CDRL) 0005 – S00000046 – WELDING PROCEDURES (WP)

***PLEASE READ SOLICITATION IN ITS ENTIRETY***

COC IS NOT AUTHORIZED FOR ALL CAI ALRE ITEMS

GOVERNMENT SURPLUS IS NOT ACCEPTABLE FOR ALL CAI ALRE ITEMS

THE FOLLOWING PROVISIONS/CLAUSES APPLY TO THIS SOLICITATION:

FAR 52.204-07 ALT I – SYSTEM FOR AWARD MANAGEMENT, ALT I

DLAD PROCUREMENT NOTES INCORPORATED BY REFERENCE

This solicitation incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.

dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

(End of Text)

UCF SECTION F – TIME OF DELIVERY FIXED QUANTITY

(a) Offers in response to this solicitation will be evaluated as specified in the solicitation. Delivery shall be offered in terms of a number of days after date of award. The number of delivery days required in this solicitation is calculated based on the Government’s planned need and customer requirements. Unless delivery is identified elsewhere in the solicitation as an evaluation factor, Offerors are encouraged to conform their delivery terms as closely as possible to the delivery days required, and there will be no evaluation preference, or penalty for faster delivery.

Offering a greater number of delivery days than the required delivery schedule may result in the offer not being considered, however the Government reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government. Delivery is required by the Government in accordance with the following schedule:

Required delivery schedule:

CLIN 0001 PRODUCTION EA 673 DAYS ADO

CLIN 0002 CONTRACTOR FAT (KFAT) 1 REPORT 120 DAYS ADO

CLIN 0003 PRODUCTION TEST AND INSPECTION (PTI) 673 DAYS ADO

CLIN 0004 CERTIFICATE OF QUALITY COMPLIANCE (COQC) 673 DAYS ADO

CLIN 0005 WELDING PROCEDURES (WP) 90 DAYS ADO

(b) The Government may elect to consider for award only those offers that comply with the required delivery schedule but reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government. The Offeror may propose an alternative delivery schedule below. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

Offeror's proposed delivery schedule:

CLIN 0001 PRODUCTION EA: ____________ DAYS ADO

CLIN 0002 CONTRACTOR FAT (KFAT) 1 REPORT: _______________ DAYS ADO

CLIN 0003 PRODUCTION TEST AND INSPECTION (PTI): _______________ DAYS ADO

CLIN 0004 CERTIFICATE OF QUALITY COMPLIANCE (COQC): ____________ DAYS ADO

CLIN 0002 WELDING PROCEDURES (WP): _______________ DAYS ADO

(c) The Government will mail, or otherwise furnish to, the Offeror an award or notice of award not later than the day the award is dated. Therefore, the Offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the award or notice of award by adding: five calendar days for delivery of the award through the ordinary mails, or one working day if the solicitation states that the award or notice of award will be transmitted electronically. (The term "working day" excludes weekends and United States (U.S.) Federal holidays.)

(End of Text) SOURCES THAT ARE NOT APPROVED FOR THIS NSN ARE REQUIRED TO SUBMIT A FULL SOURCE APPROVAL REQUEST (SAR) TO DSCC BY THE

PAGE 3 OF 32 PAGES

SPE7M2-27-Q-0042

CLOSING DATE OF THIS SOLICITATION. DUE TO THE CRITICALITY AND TIME REQUIRED FOR THE ESA EVALUATION OF ALTERNATE OFFERS, IT MAY NOT BE POSSIBLE TO CONSIDER ALTERNATE OFFERS FOR CURRENT AWARD, BUT THOSE MEETING EVALUATION CRITERIA WILL BE CONSIDERED FOR FUTURE PROCUREMENTS IF APPROVED BY THE ESA AFTER SAR EVALUATION.

TRACEBILITY TO APPROVED SOURCES LISTED IN THIS SOLICITATION AND AUTHORIZED OEM DISTRIBUTOR DESIGNATION IS REQUIRED FOR

ALL CAI PURCHASES.

FIRST ARTICLE RECOMMENDATIONS WILL BE EMAILED TO THE POST AWARD ADMINISTRATOR

Upon approval of the FAT the following applies - Disposition of First Article Test Unit: Include as Part of the Production Quantity - Total Production Quantity = 1 EA. Vendor is hereby directed that the approved First Article Test Unit is to be maintained throughout the production process as a manufacturing exhibit, and shall only be included in the final shipment.

NOTE:

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE REVISION OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS IN EFFECT ON THE SOLICITATION ISSUE DATE. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (336413) applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.

UCF SECTION M – REQUIREMENTS FOR QUANTITY INCREMENTS OR RANGES

Offers are requested for increments or ranges of quantities as listed in the schedule of supplies or services. The awarded quantity, or quantities in the case of multiple items, will be based on the requirements of the Government and the combination of price and quantity per item that is most advantageous to the Government. The quantity awarded may fall anywhere within any range.

An offer that only contains prices for quantities other that those quantities indicated in the schedule of supplies or services may be precluded from consideration for award if the Contracting Officer elects to make an award without discussion of proposals.

The unit price applicable to the entire award quantity shall be the unit price offered for the quantity range in which the award quantity falls; If an offer specifies the same price for all quantity ranges of an item, the offer may include a statement in the schedule of supplies or services that the unit price applies to all quantity ranges of that item. If an offer specifies different prices for a quantity range of an item, the offer must show a unit price in each quantity range column in the schedule of supplies or services.

If this solicitation includes an option provision, option prices must be included for each increment.

(End of Text)

PAGE 4 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION B

SUPPLIES/SERVICES: 1720-00-484-1514

ITEM DESCRIPTION:

SHEAVE ASSEMBLY

ALRE CAI

Serialization is required for this ALRE CAI part as well as the packaging for traceability. Contractor technical documentation shall reflect the appropriate marking scheme. All serialized and lot numbered CAI parts shall be accounted for; to include material scrapped during manufacturing. Re-branding by suppliers which obscures the original marking (part number, serial number, CAGE) of the OEM of ALRE CAI parts is prohibited. Please notify DLA Contracting Officer at time of quote if serialization is not practical due to size, material property, unreasonable or excessive cost.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &

RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE

ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA

DRAWINGS PROVIDED.

BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT

PAGE 5 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION B

SUPPLY/SERVICE: 1720-00-484-1514 CONT'D

NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE

SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT

EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE

ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.

RD002, COVERED DEFENSE INFORMATION APPLIES

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND

REQUIRES ENGINEERING SOURCE APPROVAL BY THE

GOVERNMENT DESIGN CONTROL ACTIVITY.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

JCP applies to all manufactures, dealers, distributors, or suppliers.

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

UNLESS WAIVED, THE FOLLOWING CDRLS APPLY:

-First Article Testing Report -Production Test and Inspection Report -Certificate of Quality Compliance -Welding Procedures -Weld Procedure Qualification Report -Welder Performance Qualification Report -Welder Level III Cert Report -Weld Visual Inspection Procedure -Welder Qualification Training Procedure -Welder Maintenance of Quality Report

CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, IS

NOT AUTHORIZED FOR THIS NSN.

AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM

SOURCE APPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN

OFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED

SOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR

WARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND

PROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL

INVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE

APPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS

BROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE:

HTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES,

COMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES

TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE

REQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST

MAY PARTICIPATE.

IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH

MAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED

PAGE 6 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION B

SUPPLY/SERVICE: 1720-00-484-1514 CONT'D

SOURCE:

(1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT

SUPPORT DIRECTORATE; OR;

(2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL

CRITERIA.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR

MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND

APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH

UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.

(February 2016)

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ040: Non-Destructive Testing (NDT) Accreditation Requirements

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers

CRITICAL APPLICATION ITEM

TDP Rev C Gen 6

IAW BASIC DRAWING NR 80020 509322

REVISION NR F DTD 04/06/2017

PART PIECE NUMBER: 509322-2R

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 23-5372

REVISION NR 18 DTD 06/04/2015

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 414593

REVISION NR G DTD 11/16/2009

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 MPR400

REVISION NR B DTD 05/19/1980

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 MPR1223

REVISION NR C DTD 06/14/2018

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 22-40792

REVISION NR R DTD 01/09/2007

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 414454

REVISION NR K DTD 05/07/2025

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 513609

REVISION NR F DTD 06/20/2001

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 509501

REVISION NR P DTD 01/22/1993

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 MPR1221

REVISION NR T DTD 07/12/2017

PAGE 7 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION B

SUPPLY/SERVICE: 1720-00-484-1514 CONT'D

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 80020 C87780

REVISION NR 51 DTD 05/09/2019

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE DRAWING NR 16236 CN004841514

REVISION NR B DTD 08/12/2026

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE QAP 16236 SQAP004841514QA

REVISION NR A DTD 08/12/2026

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE QAP 16236 SQAP004841514CFAT

REVISION NR A DTD 08/12/2026

PART PIECE NUMBER:

TDP Rev C Gen 6

IAW REFERENCE QAP 16236 CDRL-004841514-26223

REVISION NR DTD 08/11/2026

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1720-00-484-1514 17.000 EA $ ________________ $ ________________

SHEAVE ASSEMBLY

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 673 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C

UNIT CONT:ED OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ZZ = PRESERVATIVE MATERIAL

DRAWING CITES PRODUCT REQUIRES A PROTECTIVE COAT ASSEMBLY

IN ACCORDANCE WITH MPR 1221-31

CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE

WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL

IMMOBILIZE AND PROTECT PRODUCT, AND INCREASE STACKING

STRENGTH OF CONTAINER.

PAGE 8 OF 32 PAGES

SPE7M2-27-Q-0042

SUPPLY/SERVICE: 1720-00-484-1514 CONT'D

DIE-CUT SHALL HAVE HOLE IN THE CENTER FOR PRESERVED

AND WRAPPED PRODUCT TO NEST SNUGGLY INSIDE. DIE-CUT TO

AID LIFTING PRODUCT AWAY FROM CONTAINER SURFACES AND

DISTRIBUTING WEIGHT EVENLY. DIE-CUT SHALL BE DESIGNED TO

IMMOBILIZE AND PREVENT PRODUCT FROM SHIFTING WITHIN

CONTAINER.

ZZ = SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE

HEAVY ITEM - TEAM LIFT REQUIRED

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0002 0001 - S00000053 1.000 EA $ ________________ $ ________________

FOB: DELIVERY DATE: 120 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

Miscellaneous

PAGE 9 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION B

SUPPLY/SERVICE: 0001-S00000046 CONT'D

0003 0001 - S00000046 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 673 DAYS ADO

0004 0001 - S00000046 1.000 EA $ ________________ $ ________________

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 673 DAYS ADO

0005 0001 - S00000046 1.000 EA $ ________________ $ ________________

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO

PAGE 10 OF 32 PAGES

SPE7M2-27-Q-0042

SUPPLY/SERVICE: 0001-S00000046 CONT'D

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7018377073 0001 N/A N/A N/A 08/12/2028

0002 N/A N/A N/A N/A N/A N/A

0003 N/A N/A N/A N/A 9999 N/A

0004 N/A N/A N/A N/A 9999 N/A

0005 N/A N/A N/A N/A 9999 N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 32 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

C01 SUPERSEDED PART NUMBERED ITEMS (FEB 2025)

SECTION E - INSPECTION AND ACCEPTANCE

E01 SUPPLEMENTAL FIRST ARTICLE EXHIBIT DISPOSITION – CONTRACTOR MAINTAINED (MAY 2020)

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Title Number Date Tailoring

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

E05 PRODUCT VERIFICATION TESTING (MAY 2020)

(1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory.

(2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing.

(3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor's signed DD Form 1222.

The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples - Do Not Post to Stock," Contract Number [ ] and Lot/Item Number [ ]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package:

(a) Hard copies of the contract;

(b) Material certifications/process operation sheets; and

(4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery.

(5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor.

E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 32 PAGES

SPE7M2-27-Q-0042

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

[ ] Same as for supplies OR CAGE code:

Address:

Applicable to CLIN(s):

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

SECTION F - DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 32 PAGES

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

Routing Data Table *

Field Name in WAWF Data to be entered in WAWF Guidance

Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a

(SF1449)