SPE7M127Q0225.pdf
PDF 124 KB Posted
- Attached to
- PUMP, HYDRAULIC
- Solicitation number
- SPE7M127Q0225
About this file
This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain for the procurement of a hydraulic pump. The solicitation number is SPE7M1-27-Q-0225, issued November 19, 2026, with quotations due by November 24, 2026. The item being procured is NSN 4320-01-681-9493 (Pump, Hydraulic), with a quantity of 22 units required. The delivery requirement is 30 days after date of order (ADO) to DLA Distribution San Joaquin in Tracy, California. The solicitation is not a small business set-aside and falls under Full and Open Competition. This is a Special Emergency Procurement Authority (SEPA) solicitation requiring the fastest delivery possible. Quotations should be submitted on an FOB Origin basis, with inspection and acceptance at origin. The buyer is Kelsey Schlagenhaft (PMCM72F) at DLA Weapons Support Maritime Supply Chain, PO Box 3990, Columbus, OH 43218-3990.
The procurement includes extensive technical and quality requirements, including compliance with technical drawings, Qualified Products Lists/Qualified Manufacturers Lists (QPL/QML) requirements, and specialty metal restrictions under DFARS 252.225-7008, 252.225-7009, and 252.225-7010. The hydraulic pump is designated as a Critical Application Item with technical data packages referencing multiple engineering drawings with various revision dates. Export control restrictions apply under ITAR/EAR regulations, and offerors must have approved US/Canada Joint Certification Program (JCP) certification and DLA approval to access export-controlled data. Additional requirements include Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) compliance, compliance with Buy American and Balance of Payments Program requirements, prohibition on Class I ozone-depleting chemicals, and adherence to DLA Packaging Requirements and First Destination Transportation (FDT) program provisions. Standard FAR and DFARS clauses apply, including representations and certifications related to small business status, debarment, equal opportunity, trade agreements, and various security and compliance matters.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE7M1-27-Q-0225
1. REQUEST NO.
2026 NOV 19
2. DATE ISSUED
7018681970
3. REQUISITION/PURCHASE REQUEST NO.
DO-C9
RATING
DLA WEAPONS SUPPORT
MARITIME SUPPLY CHAIN
PO BOX 3990
COLUMBUS OH 43218-3990
USA
Buyer: KELSEY SCHLAGENHAFT PMCM72F Tel: 6146920209 Email: KELSEY.SCHLAGENHAFT@DLA.MIL
30 DAYS ADO
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 NOV 24
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 24 PAGES
SPE7M1-27-Q-0225
This solicitation is issued under Special Emergency Procurement Authority (SEPA) Rules and Regulations Due to the urgency of this procurement, please provide fastest delivery possible in your quote.
FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions
FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions
DFARS 252.209-7004 Subcontracting with Firms that are owned or controlled by the government of a Terrorist country
FAR 52.222-35 Equal Opportunity for Veterans
FAR 52.222-37 Employment Reports on Veterans
FAR 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items, in solicitations and contracts exceeding $150,000 that are for, or specify the use of, EPA-designated products containing recovered materials. (Except for the acquisition of commercially available off-the-shelf items)
DFARS 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism
FAR 52.225-13 Restrictions on Certain Foreign Purchases
DFARS 252.225-7000 Buy American Act — Balance of Payments Program Certificate-Basic
DFARS 252.225-7001 Buy American Act and Balance of Payments Program
NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (333914) applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.
DLAD Procurement Notes Incorporated By Reference (Nov 2016)
This solicitation incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.
dla.mil/HQ/Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.
FDT This solicitation is issued under the First Destination Transportation (FDT) program to reduce the cost of transportation through the use of Government-arranged transportation utilizing Government contracts and rates. If this award is for FMS or has an APO/FPO ship-to address, these instructions do not apply.
For FDT Program Transportation Requirements, see Procurement Note C16 First Destination Transportation (FDT) Program, Government-Arranged Transportation for Manual Awards, C17 First Destination Transportation (FDT) Program – Shipments Originating from Outside the Contiguous United States, and Procurement Note C20 – Vendor Shipment Module (VSM). Offers should be submitted based on FOB origin. For offerors whose shipments will originate from outside the contiguous United States, the offeror’s f.o.b. origin price shall include transportation to a contiguous United States location that the offeror selects based on cost-effectiveness or other variables at the offeror’s discretion. Additional information about FDT can be found at http://www.dla.mil/LandandMaritime/Business/Selling/DLA-Land-and-Maritime- Procurement-Initiatives/FDTPI/
UCF SECTION M EVALUATION FACTORS FOR AWARD
Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s). (End of Text)
“THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE REVISION OF THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS IN EFFECT ON THE SOLICITATION ISSUE DATE. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/ Offers/eProcurement.aspx."
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2020)
(1) The Government will use the Supplier Performance Risk System (SPRS) (https://www.sprs.csd.disa.mil/) (formerly Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR)) to evaluate suppliers’ past performance.
(2) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier’s performance history by Federal supply class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance
PAGE 3 OF 24 PAGES
SPE7M1-27-Q-0225
information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies the Government is purchasing.
(3) The contracting officer will use the quality and delivery classifications identified for a supplier in SPRS to evaluate a supplier’s past performance in conjunction with the supplier’s references (if requested). The Government will use this past performance information in accordance with the basis for award stated in the solicitation.
(4) SPRS generates classifications daily for each contractor. The SPRS Software User's Guide for Awardees/ Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) and the SPRS Government User Guide (https://www.sprs.
csd.disa.mil/pdf/SPRS_Government.pdf) provide instructions for accessing SPRS classifications. Contractors have access to SPRS for their own classifications only. Suppliers are encouraged to review their own classifications; the SPRS reporting procedures and classification methodology detailed in the SPRS Software User's Guide for Awardees/ Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf); and the SPRS Evaluation Criteria (https://www.sprs.
csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf). The SPRS Software User's Guide for Awardees/Contractors (https:// www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) provides the method to challenge a rating generated by SPRS.
PAGE 4 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLIES/SERVICES: 4320-01-681-9493
ITEM DESCRIPTION:
PUMP,HYDRAULIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/
To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
PAGE 5 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
This material has specialty metal requirements. DFARS 252.225-7008, DFARS 252.225-7009, and DFARS 252.225-7010 apply to this award if over the Simplified Acquisition Threshold.
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2
IAW BASIC DRAWING NR 19207 12611341
REVISION NR C DTD 09/20/2023
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12412329
REVISION NR B DTD 05/19/2010
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19200 8762812
REVISION NR C DTD 11/08/2001
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12420325
REVISION NR L DTD 11/15/2024
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19200 8762813
REVISION NR C DTD 12/08/1982
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361
REVISION NR DTD 12/01/2017
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272
REVISION NR DTD 12/01/2017
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12600041
REVISION NR D DTD 07/09/2020
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12593834
REVISION NR K DTD 03/19/2026
PAGE 6 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12612043
REVISION NR A DTD 03/10/2020
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12602228
REVISION NR D DTD 11/21/2025
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12607222
REVISION NR C DTD 04/02/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611313
REVISION NR B DTD 01/14/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12608785
REVISION NR A DTD 10/17/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12601507
REVISION NR C DTD 12/03/2020
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12605873
REVISION NR A DTD 03/15/2018
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611279
REVISION NR B DTD 04/09/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611280
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611281
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611282
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611283
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611284
REVISION NR A DTD 01/14/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611285
REVISION NR B DTD 10/23/2024
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611286
REVISION NR B DTD 03/03/2025
PART PIECE NUMBER:
PAGE 7 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611287
REVISION NR A DTD 05/20/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611288
REVISION NR A DTD 08/20/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611289
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611290
REVISION NR A DTD 05/30/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611291
REVISION NR B DTD 04/09/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611292
REVISION NR B DTD 09/20/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611293
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611294
REVISION NR C DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611295
REVISION NR A DTD 09/20/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611296
REVISION NR B DTD 04/09/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611297
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611298
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611299
REVISION NR B DTD 01/15/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611300
REVISION NR A DTD 12/02/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611301
REVISION NR A DTD 10/08/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611302
PAGE 8 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
REVISION NR A DTD 10/08/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611303
REVISION NR A DTD 10/08/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611304
REVISION NR A DTD 12/02/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611305
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611306
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611307
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611308
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611309
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611310
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611311
REVISION NR B DTD 04/09/2021
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611312
REVISION NR A DTD 08/25/2019
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611397
REVISION NR B DTD 03/31/2022
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611341
REVISION NR DTD 06/24/2020
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611341
REVISION NR DTD 05/08/2025
PART PIECE NUMBER:
TDP Rev B Gen 2
IAW REFERENCE DRAWING NR 19207 12611341
REVISION NR C DTD 09/20/2023
PART PIECE NUMBER:
PAGE 9 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 4320-01-681-9493 22.000 EA $ ________________ $ ________________
PUMP,HYDRAULIC
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
6/12/2025
SPECIAL PACKAGING INSTRUCTIONS(SPI)
SPI NUMBER: AK16819493
DATE: 6/24/2020
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7018681970 0001 N/A N/A N/A 11/10/2027
PAGE 10 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION B
SUPPLY/SERVICE: 4320-01-681-9493 CONT'D
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION C - SPECIFICATIONS/SOW/SOO/ORD
C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)
SECTION E - INSPECTION AND ACCEPTANCE
52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR
SECTION G - CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award)
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award)
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
See administer listed on page 1
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of Clause)
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)
SECTION I - CONTRACT CLAUSES
52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY
AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS
52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB
2026) FAR
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 24 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS
252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN
2023) DFARS
52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED (DEVIATION 2026-O0038) (FEB 2026) FAR
252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY
THAT IS A STATE SPONSOR OF TERRORISM (MAY 2019) DFARS
52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-35 EQUAL OPPORTUNITY FOR VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION 2026-O0040, REVISION 1) (APR 2026)
FAR
52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR
252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR
USE ON MILITARY INSTALLATIONS (MAR 2024) FAR
252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (FEB 2024) DFARS
252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM, ALT II (FEB 2024) DFARS
252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS
252.225-7006 ACQUISITION OF THE AMERICAN FLAG (DEC 2022) DFARS
252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022) DFARS
252.225-7013 DUTY-FREE ENTRY (OCT 2025) DFARS
252.225-7015 RESTRICTION ON ACQUISITION OF HAND OR MEASURING TOOLS (JUN 2005) DFARS
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION I - CONTRACT CLAUSES (CONTINUED)
252.225-7060 PROHIBITION ON CERTAIN PROCUREMENTS FROM THE XINJIANG UYGHUR AUTONOMOUS REGION (JUN 2023)
DFARS
52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024) FAR
52.232-1 PAYMENTS (APR 1984) FAR
52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR
52.232-11 EXTRAS (APR 1984) FAR
52.232-25 PROMPT PAYMENT (JAN 2017) FAR
52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR
52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023) FAR
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) DFARS
252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS
52.233-1 DISPUTES (MAY 2014) FAR
52.233-3 PROTEST AFTER AWARD (DEVIATION 2026-O0038) (FEB 2026) FAR
52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR
52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:
(e) Governmentwide exclusion and removal orders.
(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e) (1). [Contracting Officer must select either “yes” or “no” for each of the following types of FASCSA orders:] Yes [] No [] DHS FASCSA Order Yes [] No [] DoD FASCSA Order Yes [] No [] DNI FASCSA Order
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS
252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT
INFORMATION (JAN 2023) DFARS
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (DEVIATION 2026-O0025)
(JUN 2026) DFARS
252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES
(JAN 2023) DFARS
252.225-7051 PROHIBITION ON ACQUISITION OF CERTAIN FOREIGN COMMERCIAL SATELLITE SERVICES (DEC 2022) DFARS
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION I - CONTRACT CLAUSES (CONTINUED)
252.240-7995 PROHIBITION ON CONTRACT AWARDS WITH ENTITIES THAT CONTRACT WITH LOBBYISTS FOR CHINESE
MILITARY COMPANIES -- REPRESENTATION (DEVIATION 2026-O0025) (SEP 2026) DFARS
Standard Element ZB_240_7999 has no Title
52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR
252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS
52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION 2026-O0038) (FEB 2026)
FAR
(a) Definitions. As used in this clause -- Commercial product, commercial service and nondevelopmental item have the meanings contained in Federal Acquisition Regulation (FAR) 2.101.
Subcontract has the meaning at FAR 44.401
(b) Requirements.
(1) To the maximum extent practicable, the Contractor shall incorporate, and require its subcontractors at all tiers to incorporate, commercial products, commercial services, or non-developmental items as components of items to be supplied under this contract.
(2) If a clause in the following table is included in the contract, the Contractor shall insert the clause in subcontracts for commercial products or commercial services and must flow down the requirements of the clause to subcontracts as indicated in the specific clause:
Number Title Date 52.203-13 Contractor Code of
Business Ethics and Conduct
NOV 2021
52.203-17 Contractor Employee Whistleblower Rights
NOV 2023
52.203-19 Prohibition on Requiring Certain Internal
Confidentiality Agreements or Statements
JAN 2017
52.204-9 Personal Identity Verification of Contractor
Personnel
JAN 2011
52.219-8* Utilization of Small Business Concerns
JAN 2025
52.222-35 Equal Opportunity for Veterans
JUN 2020
52.222-36 Equal Oppurtunity for Workers with Disabilities
JUN 2020
52.222-37 Employment Reports for Veterans
JUN 2020
52.222-40 Notification of Employee Rights Under the National
Labor Relations Act
DEC 2010
52.222-41 Service Contract Labor Standards
AUG 2018
52.222-50 Combating Trafficking in Persons
NOV 2021
52.222-50 with Alt I Combating Trafficking in Persons, with its Alternate I
MAR 2015
52.222-51 Exemption from Application of the Service Contract
Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment -
Requirements
MAY 2014
52.222-53 Exemption from Application of the Service Contract
MAY 2014
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION I - CONTRACT CLAUSES (CONTINUED)
Number Title Date Labor Standards to
Contracts for Certain Services - Requirements
52.222-54 Employment Eligibility Verification
JAN 2025
52.222-62 Paid Sick Leave Under Executive Order 13706
JAN 2022
52.224-3 Privacy Training JAN 2017 52.224-3 with Alt I Privacy Training, with
Alternate I
JAN 2017
52.225-26 Contractors Performing Private Security Functions Outside the United States
OCT 2016
52.232-40 Providing Accelerated Payments to Small
Business Subcontractors
MAR 2023
52.240-91 Security Prohibitions and Exclusions
DATE
52.240-91 with Alt I Security Requirements, with its Alternate I
DATE
52.240-92 Security Requirements DATE 52.240-92 with Alt II Security Requirements, with its Alternate II
DATE
52.247-64 Preference for Privately Owned U.S.-Flag
Commercial Vessels
NOV 2021
* Include only if the subcontract offers further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.109(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.
(c) Subcontracts. The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract.
(End of clause)
252.244-7000 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (NOV 2023) DFARS
252.246-7007 CONTRACTOR COUNTERFEIT ELECTRONIC PART DETECTION AND AVOIDANCE SYSTEM (JAN 2023) DFARS
252.246-7008 SOURCES OF ELECTRONIC PARTS (JAN 2023) DFARS
252.247-7023 TRANSPORATION OF SUPPLIES BY SEA --- BASIC (OCT 2024) DFARS
Basic. As prescribed in 247.574(b) and (b)(1), use the following clause:
(a) Definitions. As used in this clause -- “Foreign-flag vessel” means any vessel that is not a U.S.-flag vessel.
“Ocean transportation” means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.
“Subcontractor” means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.
“Supplies” means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.
“U.S.-flag vessel” means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116..
(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.
(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --
(i) This contract is a construction contract; or
(ii) The supplies being transported are --
(A) Other than commercial products; or
(B) Commercial products that --
(1) The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it https://www.acq.osd.mil/dpap/dars/dfars/html/current/247_5.htm
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION I - CONTRACT CLAUSES (CONTINUED)
subcontracts for f.o.b. destination shipment);
(2) Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or
(3) Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.
(c) The Contractor and its subcontractors may request, via the Contracting Officer, a waiver of the requirement to use a U.S.-flag vessel, or identification of any available U.S.-flag vessels, if the Contractor or a subcontractor sufficiently explains that --
(1) U.S.-flag vessels are not available at a fair and reasonable rate for commercial vessels of the United States; or
(2) U.S.-flag vessels are otherwise not available.
(d) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, however, if a DoD waiver is not approved prior to shipper's sailing date, this will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --
(1) Type, weight, and cube of cargo;
(2) Required shipping date;
(3) Special handling and discharge requirements;
(4) Loading and discharge points;
(5) Name of shipper and consignee;
(6) Prime contract number; and
(7) A documented description of current, diligent efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of quotes will suffice for this purpose. Copies of telephone notes, emails, and other relevant communications will otherwise be considered for this purpose.
(e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of Transportation, 400 Seventh Street SW, Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:
(1) Prime contract number;
(2) Name of vessel;
(3) Vessel flag of registry;
(4) Date of loading;
(5) Port of loading;
(6) Port of final discharge;
(7) Description of commodity;
(8) Gross weight in pounds and cubic feet if available;
(9) Total ocean freight in U.S. dollars; and
(10) Name of the carrier.
(f) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief --
(1) No ocean transportation was used in the performance of this contract;
(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;
(3) Ocean transportation was used, and the Contractor had received a prior-approved waiver for U.S.-flag vessels for all foreign-flag ocean transportation; or
(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of DoD. The Contractor shall describe these shipments in the following format:
* ITEM DESCRIPTION CONTRACT LINE
ITEMS QUANTITY
TOTAL
(g) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.
(h) If the Contractor indicated in response to the solicitation provision, Representation of Extent of Transportation by Sea, that it did not anticipate transporting by sea any supplies; however, after the award of this contract, the Contractor learns that supplies will be transported by sea, the Contractor --
(1) Shall notify the Contracting Officer of that fact; and
(2) Hereby agrees to comply with all the terms and conditions of this clause.
(i) Subcontracts. In the award of subcontracts, for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial products, the Contractor shall flow down the requirements of this clause as follows:
(1) The Contractor shall insert the substance of this clause, including this paragraph (i), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.
(2) The Contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (i), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.
(End of clause)
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION I - CONTRACT CLAUSES (CONTINUED)
52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) (SHORT FORM) (APR 1984) FAR
52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) FAR
52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) FAR
As prescribed in 52.107(b), insert the following clause:
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
FAR: https://www.acquisition.gov/far-overhaul/far-part-deviation-guide DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives/
52.253-1 COMPUTER GENERATED FORMS (DEVIATION 2026-O0038) (FEB 2026) FAR
252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) DFARS
252.239-7098 PROHIBITION ON CONTRACTING TO MAINTAIN OR ESTABLISH A COMPUTER NETWORK UNLESS SUCH NETWORK IS DESIGNED TO BLOCK ACCESS TO CERTAIN WEBSITES---REPRESENTATION (DEVIATION 2021-O0003) (APR 2021) Include the following provision in all solicitations, including solicitations for the acquisition of commercial items under FAR part 12, that will use funds made available by the Consolidated Appropriations Act, 2021 (Pub. L. 116-260), or any other Act that extends to fiscal year 2021 funds the same prohibitions as contained in section 8116, division C, title VIII, of the Consolidated Appropriations Act, 2021 (Pub. L. 116-260).
(a) In accordance with section 8116 of Division C of the Consolidated Appropriations Act, 2021 (Pub. L. 116-260), or any other Act that extends to fiscal year 2021 funds the same prohibitions, none of the funds appropriated (or otherwise made available) by this or any other Act for DoD may be used to enter into a contract to maintain or establish a computer network unless such network is designed to block access to pornography websites. This prohibition does not limit the use of funds necessary for any Federal, State, tribal, or local law enforcement agency or any other entity carrying out criminal investigations, prosecution, or adjudication activities, or for any activity necessary for the national defense, including intelligence activities.
(b) Representation. By submission of its offer, the Offeror represents that it is not providing as part of its offer a proposal to maintain or establish a computer network unless such network is designed to block access to pornography websites.
(End of provision)
52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) FAR
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS
52.203-11 CERTIFICATION AND DISCLOSURE REGARDING PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS
(SEP 2007) FAR
252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024) DFARS As prescribed in 204.1202, use the following provision:
Substitute the following paragraphs (b), (d), and (e) for paragraphs (b) and (d) of the provision at FAR 52.204-8:
(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (e) of this provision applies.
(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (e) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:
[ ] (i) Paragraph (e) applies.
[ ] (ii) Paragraph (e) does not apply and the Offeror has completed the individual representations and certifications in the solicitation.
(d)(1) The following representations or certifications in the SAM database are applicable to this solicitation as indicated:
(i) 252.204-7016, Covered Defense Telecommunications Equipment or Services --Representation. Applies to all solicitations.
(ii) 252.216-7008, Economic Price Adjustment --Wage Rates or Material Prices Controlled by a Foreign Government. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.
(iii) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.
(iv) 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services --Representations. Applies to solicitations for the acquisition of commercial satellite services.
(v) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.
(vi) 252.229-7012, Tax Exemptions (Italy) --Representation. Applies to solicitations and contracts when contract performance will be in Italy.
(vii) 252.229-7013, Tax Exemptions (Spain) --Representation. Applies to solicitations and contracts when contract performance will be in Spain.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 24 PAGES
SPE7M1-27-Q-0225
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer: [Contracting Officer check as appropriate.] [ ] (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.
[ ] (ii) 252.225-7000, Buy American --Balance of Payments Program Certificate.
[ ] (iii) 252.225-7020, Trade Agreements Certificate.
[ ] Use with Alternate I.
[ ] (iv) 252.225-7031, Secondary Arab Boycott of Israel.
[ ] (v) 252.225-7035, Buy American --Free Trade Agreements --Balance of Payments Program Certificate.
[ ] Use with Alternate I.
[ ] Use with Alternate II.
[ ] Use with Alternate III.
[ ] Use with Alternate IV.
[ ] Use with Alternate V.
[ ] (vi) 252.226-7002, Representation for Demonstration Project for Contractors Employing Persons with Disabilities.
[ ] (vii) 252.232-7015, Performance-Based Payments --Representation.
(e) The Offeror has completed the annual representations and certifications electronically via the SAM website at https://www.sam.gov. After reviewing the SAM database information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-8(c) and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [Offeror to insert…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .