PIDs.pdf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:016713949

DRIVE SHAFT ASSEMBLY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:IP025

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS060

REFERENCE NUMBER:CS147

REFERENCE NUMBER:RS002

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12576357

REVISION NR A DTD 01/30/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5214479

REVISION NR F DTD 12/11/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12350824

REVISION NR R DTD 09/28/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR C DTD 05/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12308493

REVISION NR B DTD 06/01/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12308573

REVISION NR A DTD 09/30/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576395

REVISION NR DTD 05/02/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576396

REVISION NR A DTD 08/02/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576399

REVISION NR A DTD 03/05/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576397

REVISION NR A DTD 02/05/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576400

REVISION NR DTD 11/02/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12628250

REVISION NR DTD 02/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576403

REVISION NR A DTD 01/30/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576357

REVISION NR DTD 06/15/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12308492

REVISION NR B DTD 06/01/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12576357

REVISION NR DTD 09/13/2024

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK16713949, DATED 06-15-2018.

LEVEL OF PACKING: B

LEVEL OF PRESERVATION: MILITARY

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

NSN:011024531

HUB, BODY.

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12307519

REVISION NR F DTD 08/06/1990

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12307519

REVISION NR C DTD 10/20/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12350824

REVISION NR R DTD 09/28/2017

IAW REFERENCE DRAWING NR 19207 12307519

REVISION NR DTD 09/11/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12307519

REVISION NR A DTD 08/03/1981

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH PACKAGING DATA SHEET (PDS) 12307519<(>,<)>

REVISION A, DATED 03-05-1981.

ZZ - SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:011024532

HUB, BODY.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12291954

REVISION NR H DTD 03/02/1988

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12291954

REVISION NR E DTD 09/15/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12350824

REVISION NR R DTD 09/28/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12291954

REVISION NR DTD 12/13/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12291954

REVISION NR B DTD 10/28/1988

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK11024532, REVISION B, DATED 10/28/1988.

ZZ = SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE

HEAVY ITEM: TWO-PERSON LIFT

REFERENCE NUMBER:ZD079 OBJECT TEXT ID ST

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:013477637

HOUSING ASSEMBLY, SHOCK ABSORBER.

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:ZD087

CONTRACTOR FIRST ARTICLE TESTING REQUIRE IAW QAPS "ENGINEERING TDP

CLARIFICATION,(QAP 12346481), 8461416, 12346148, 12346474. DISPOSITION

OF APPROVED FIRST ARTICLE SAMPLES: THE CONTRACTOR MAY DELIVER APPROVED

UNDAMAGED FIRST ARTICLE SAMPLES AS PART OF THE PRODUCTION QUANTITY

ADDITIONAL 100% INSPECTION BY DCMA QAR IS REQUIRED IAW THE VISUAL

ACCEPTANCE CRITERIA DEFINED IN "ENGINEERING TDP CLARIFICATION, TDP

1991-001SLE" (QAP 12346481). EXCEPTION TO DWG 12346148; SECTION N-N:

BREAK THROUGH OF BOLT HOLES IS ACCEPTABLE REMOVAL OF BURRS AND SHARP

EDGES STILL APPLIES. EXCEPTION TO QAP 12346148; PAGE 6 and 9, (PART II, PARA 2 and PART IV, PARA 2):RADIOGRAPHIC CRITICALITY LEVEL SHALL BE KL2

IN LIEU OF KL3. EXCEPTION TO DWG 12346148; SPLINE DATA: NUMBER OF TEETH

: 46 DIAMETRAL PITCH : 16/32 PRESSURE ANGLE : 45 DEGREES CIR

SPACE MAX ACT : .1183 CIR SPACE MIN EFF : .1107 BASE DIAMETER :

2.0329320 MEASURE BTWN PINS : 2.6993/2.7032 PROFILE TOLERANCE : +.0003

(ZERO AT 2.8750) : -.0005 LEAD TOL ACROSS 2 : .0005 TOTAL INDEX TOL

: .0018 CIR SPACE MIN ACT : .1145 CIR SPACE MAX EFF : .1145 MATING

SPLINE P/N : 12346262 EXCEPTION TO QAP 12346474; SHEET 4 AND SHEET 5,

TEST PROCEDURE NUMBER 5: ADJUST REGULATOR (ITEM 6) AT 25 TO 30 PSIG ILO

5 TO 10 PSIG. NOTE1: CASTING QUALITY IS CRITICAL FOR MANUFACTURING THIS

ASSEMBLY. UTILIZATION OF A PROVEN CASTING HOUSE IS HIGHLY ENCOURAGED.

FOR ASSISTANCE IN LOCATING TOOLING AND CASTING SOURCES REFERENCE THE WEB

SITE BELOW.

http://www.aviation.dla.mil/ExternalWeb/UserWeb/AviationEngine ering/SupplyChainAssistance.asp OR EMAIL DSCC.CAST.FORGE@DLA.MIL NOTE2:

CRITICAL AREAS OF THE CASTING ARE DEFINED IN THE "ENGINEERING TDP

CLARIFICATION, TDP 1991-001SLE" DOCUMENT. THIS IS A POST-MACHINING

INSPECTION DOCUMENT, BUT SHOULD BE UTILIZE FOR DEFINING THE AREAS OF

INTEREST DURING ALL PRE-MACHINING INSPECTIONS (RADIOGRAPHIC AND MAG

PARTICLE).

REFERENCE NUMBER:CS147

SOURCE CONTROL ITEMS ARE 8461416 AND 12273108.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:CS072

DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT<(>,<)>

APPLIES.

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:RD002

IAW BASIC DRAWING NR 19207 12346481

REVISION NR DTD 03/15/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273108

REVISION NR E DTD 02/13/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346148

REVISION NR E DTD 07/20/2022

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12346148

REVISION NR D DTD 12/15/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346273

REVISION NR C DTD 11/23/2007

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12346474

REVISION NR DTD 08/18/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346475

REVISION NR B DTD 08/08/2017

IAW REFERENCE DRAWING NR 19207 12346481

REVISION NR B DTD 04/17/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SD-X12140F

REVISION NR F DTD 11/25/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 8461416

REVISION NR B DTD 02/19/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8461416

REVISION NR J DTD 01/29/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346474

REVISION NR A DTD 11/23/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SD-X12142

REVISION NR F DTD 01/09/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344344

REVISION NR N DTD 12/13/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12274429

REVISION NR D DTD 04/08/1991

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-130N(1) NOT 1

REVISION NR N DTD 08/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344343

REVISION NR R DTD 08/01/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SD-X12140

REVISION NR F DTD 11/25/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12346481

REVISION NR DTD 12/14/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SD-X12142

REVISION NR D DTD 11/25/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346481

REVISION NR A DTD 03/15/2023

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK 13477637, REVISION A, DATED 03/15/2023.

NOTICE - SPI IS TO BE USED AND ALL UPDATED/CURRENT

SPECS MUST BE FOLLOWED. THIS MATERIAL CANNOT BE

PACKAGED ASTM D3951, COMMERCIAL PACKAGING.

ZZ - SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE

MECHANICAL HANDLING REQUIRED

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129, SERIAL

NUMBER SHALL BE MARKED ON THE UNIT, INTERMEDIATE,

AND SHIPPING CONTAINERS.

5.1.2 Identification text marking on exterior

containers, palletized unit loads, and unpacked items (see multiple figures in 5.3.)

g. Military preservation method, date of unit preservation, or pack date (see 5.1.1g).

5.1.1.g. If a military preservation method does not apply, the method space shall be left blank.

If a preservation date does not apply, the pack date shall be shown (e.g., "6/15").

IF SERIAL NUMBER MARKING REQUIRED, THE PACKING

LIST SHALL CONTAIN SERIAL NUMBERS PER MIL-STD-129R,

PARAGRAPHS 5.4.1.1.1<(>,<)> 5.4.1.1.2, 5.4.1.2.1, AND

5.4.1.2.2.

REFERENCE NUMBER:IP056 OBJECT TEXT ID ST

REFERENCE NUMBER:ZL012 OBJECT TEXT ID ST

NSN:016609619

SPROCKET WHEEL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CQ026

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A1202

REFERENCE NUMBER:CQ011

REFERENCE NUMBER:CA070

IAW BASIC DRAWING NR 19207 12542334

REVISION NR A DTD 05/30/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369930

REVISION NR B DTD 05/15/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12577737

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12542334

REVISION NR DTD 08/27/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12542334

REVISION NR DTD 03/30/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12542360

REVISION NR DTD 09/17/2018

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Packaging and Preservation to be in accordance with Special Packaging Instructions SPI: AK16609619. M-41,unit container shall be IAW ASTM D6251.

NSN:014197097

BRACKET, EYE, NONROTATING SHAFT.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS060

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:A1166

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12366200

REVISION NR DTD 08/10/1995

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR H DTD 09/24/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364348

REVISION NR DTD 08/21/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12366199

REVISION NR DTD 03/29/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8676198

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-53039F

REVISION NR F DTD 09/06/2022

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-64159C

REVISION NR C DTD 03/24/2022

PART PIECE NUMBER:

IAW REFERENCE UNK TT-C-490H

REVISION NR H DTD 09/16/2021

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53039-22 NOT 1

REVISION NR 22 DTD 03/04/2009

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53084-6 NOT 1

REVISION NR 6 DTD 06/16/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-64159-13 NOT 1

REVISION NR 1 DTD 03/16/2009

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-53084C

REVISION NR C DTD 09/18/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12366200

REVISION NR DTD 09/11/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

REVISION NR DTD 12/01/2017

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:E5 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER ZD003

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies "Markings shall be omitted for sensitive, controlled or pilfera bl e items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER ZL006

This item contains a phosphate coating requirement IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V. In lieu of the required submittal of a preproduction phosphate procedure the following is now required: The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the NADCAP standard for the phosphate chemical processes. Verification of this certification is required and must be supplied upon request of the Contracting Officer.

REFERENCE NUMBER CS072

CLASS 3 THREADS APPLY TO THIS NSN.

REFERENCE NUMBER IP056

IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,

PACKAGING, PACKING AND MARKING.

REFERENCE NUMBER ZL012

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

REFERENCE NUMBER CS060

THE ITEM DESCRIBED IN THIS SOLICITATION

IS DEFINED IN WHOLE OR IN PART BY ARMY

DRAWING(S). THESE DRAWING(S) MAY CONTAIN

A PAINT FINISHING REQUIREMENT. WHERE SUCH

REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING

16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE-

MENTS OF THE ARMY DRAWING(S). THIS DRAWING

CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT

RESISTANT COATINGS (CARC), AND ADDITIONAL

INFORMATION RELATING TO HIGH TEMPERATURE

COATINGS.

REFERENCE NUMBER A1166

RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING

ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE

UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE

TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE

DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER

BEARINGS.

A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT

https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN

A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND

HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO

PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD

FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL

REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED

WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE

RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS

225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CQ026

"ANY ITEM PREVIOUSLY TESTED BY A VENDOR

IN ACCORDANCE WITH *** QUALIFICATION***

REQUIREMENTS (FOR EXAMPLE: FAT, HIGH

SHOCK AND/OR VIBRATION TEST), STATED ON

DWG, SPECIFICATION, OR STANDARD MAY NOT

REQUIRE FURTHER TESTING BY THE SAME VENDOR

EXCEPT FOR A LATER CHANGE IN DESIGN,

MANUFACTURING PROCEDURES, OR TESTING

REQUIREMENTS. A CERTIFICATION OF

CONFORMANCE WITH PREVIOUS TEST RESULTS

ATTESTING APPLICABILITY SHALL BE

SUBMITTED FOR ITEMS PREVIOUSLY TESTED."

REFERENCE NUMBER A1202

Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling.

For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.

REFERENCE NUMBER CQ011

CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH

AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE

REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN

NATIONAL STANDARD FOR CALIBRATION - CALIBRATION

LABORATORIES AND MEASURING AND TEST EQUIPMENT -

GENERAL REQUIREMENTS, OR ISO 10012-1, QUAILITY

ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT -

PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR

MEASURING EQUIPMENT.

REFERENCE NUMBER ZD004

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER RS002

THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT