Project CL18297001 PID.rtf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014504015

COVER,FITTED,VEHICULAR

REFERENCE NUMBER:RP001

REFERENCE NUMBER:CS001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:ZD080

IF REQUIRED BY CONTRACT, FIRST ARTICLE SHALL BE

IN ACCORDANCE WITH QAP 12340761, TABLE III, PARA

1, INITIAL PRODUCTION INSPECTION.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

IAW BASIC DRAWING NR 19207 12340761

REVISION NR H DTD 03/02/2007

PART PIECE NUMBER: 12340761-9

IAW REFERENCE QAP 19207 12340761

REVISION NR B DTD 12/01/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12460231

REVISION NR DTD 09/01/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 97403 13226E7463

REVISION NR C DTD 08/15/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340197

REVISION NR B DTD 03/04/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342457

REVISION NR C DTD 05/30/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340519

REVISION NR D DTD 11/07/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340211

REVISION NR B DTD 03/13/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340222

REVISION NR A DTD 02/21/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12460335

REVISION NR A DTD 08/22/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340682

REVISION NR C DTD 05/12/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340517

REVISION NR D DTD 04/20/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340526

REVISION NR D DTD 04/20/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340864

REVISION NR A DTD 02/17/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342456

REVISION NR A DTD 05/12/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81337 2-3-567

REVISION NR B DTD 03/24/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340198

REVISION NR B DTD 01/02/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340210

REVISION NR D DTD 11/05/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340679

REVISION NR B DTD 09/15/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12463286

REVISION NR B DTD 01/01/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 24617 MK61.103A

REVISION NR DTD 06/01/1954

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340761-9

REVISION NR DTD 05/23/2018

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,All Section “”Packaging and Marking Clauses take precedence over

ASTM D3951.

•,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “P”Commercial Pack.

•,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY