Project_CL18309001_PID.rtf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014612809

MAINTENANCE KIT, VEHICULAR.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:ZD087

NOTE 4 OF BASIC KIT HAS BEEN SUPPLEMENTED WITH NSN

2590-01-461-5874. SOURCE AND PART NUMBER REMAIN

CAGE 05967 PART NUMBER 10583.

REFERENCE NUMBER:CS001

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS118

REFERENCE NUMBER:CQ015

IAW BASIC DRAWING NR 19207 12469905

REVISION NR A DTD 10/23/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12356665

REVISION NR A DTD 04/05/1988

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12356666

REVISION NR A DTD 05/26/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 11664669

REVISION NR E DTD 01/22/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 11629193

REVISION NR K DTD 08/25/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12395681

REVISION NR A DTD 04/26/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12356666

REVISION NR A DTD 04/05/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5705484

REVISION NR A DTD 03/09/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 M83248/1

REVISION NR DTD 03/31/1972

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344779

REVISION NR D DTD 01/01/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12307596

REVISION NR A DTD 03/16/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 14153 CIPRDMS17825-6

REVISION NR A DTD 02/19/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5705228

REVISION NR B DTD 11/20/1984

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-45913D NOT 1

REVISION NR D DTD 10/24/2016

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MS29513C NOT 3

REVISION NR C DTD 03/01/2001

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MS35333K(1) NOT 4

REVISION NR 1 DTD 07/18/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344343

REVISION NR M DTD 02/26/2017

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM21044

REVISION NR 2 DTD 03/31/2016

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM24665

REVISION NR 02 DTD 03/31/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 96906 MS35338

REVISION NR L DTD 04/07/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 11629578

REVISION NR H DTD 10/24/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469905

REVISION NR DTD 01/30/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80064 2585163

REVISION NR B DTD 12/06/1968

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469905

REVISION NR A DTD 10/23/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12446439

REVISION NR A DTD 09/24/2014

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

REFERENCE NUMBER:ZD037

A PARTS LIST (WITH PART NAME, PART NUMBER & QUANTITY) SHALL BE INCLUDED

WITHIN EACH KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL ALSO BE

INCLUDED WITHIN EACH PACKAGE.

NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice. Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus requiring no additional sorting by user or depot personnel.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CS118

FULL AND OPEN COMPETITION APPLIES.

REFERENCE NUMBER CQ015

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

REFERENCE NUMBER ZD037

COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN

ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W

MIL-STD-129.

PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT

TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE

THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT

(THAT IS, 1 OF 2, 2 OF 2, ETC.)

CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE

OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS

WITHIN THE KIT.