SPE7L727Q0175.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE7L7-27-Q-0175

1. REQUEST NO.

2026 NOV 02

2. DATE ISSUED

See Schedule

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA WEAPONS SUPPORT

LAND SUPPLIER OPNS BATTERIES/TIRES

P O BOX 3990

COLUMBUS OH 43218-3990

USA

Buyer: Lisa Kowalczyk PLCLZZ7 Tel: DSN312-850-4183 Fax: 614-693-1603 Email: Lisa.Kowalczyk@dla.mil

60 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 13

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 29 PAGES

SPE7L7-27-Q-0175

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (335999 NAICS) applies to this solicitation. See http://www.sba.gov/ content/table-small-business-size-standards for the corresponding small business size standard.

A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB Program; or

(E) Historically underutilized business zone small business.

DCMA inspection is limited to kind, count, and condition at the site of distributor/dealer (or at the OEM site if the OEM is the awardee).

52.246-15Certificate of Conformance - Applies

Pack in accordance with MIL-STD-2073-1E Level B, Pack Code: Q” The vendor is responsible for certifying the hazardous material on a HAZDEC form.

HAZARDOUS MATERIAL PER FED STD 313D. MSDS APPLIES.

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS ***

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labeled in accordance with one of the Acts in paragraphs (b) (1) through

(5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL (If None, Insert 'None.') None___________________________________________________________ (Vendor Fill-in)

ACT

(Vendor Fill-in) MATERIAL (If None, Insert 'None.') (Vendor Fill-in)

ACT

(Vendor Fill-in) MATERIAL (If None, Insert 'None.') (Vendor Fill-in)

ACT

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997) FAR

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material _____SEE SDS (Vendor Fill-in) (If none, insert 'None') Identification No. – NSN (Vendor Fill-in)

52.223-9000 MATERIAL SAFETY DATA SHEETS AND HAZARD WARNING LABELS (NOV 2011) DLAD (a)(1) This clause is to be used in conjunction with Federal Acquisition Regulation (FAR) clause 52.223-3, Hazardous Material Identification and Material Safety Data, and Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.223-7001, Hazard Warning Labels. Notwithstanding paragraph 4 of the latest Federal Standard (FED-STD) 313, the apparently successful offeror shall submit Material Safety Data Sheets (MSDSs) and accompanying Hazard Warning Labels (HWLs) to the contracting officer for review and approval prior to award.

(2) The MSDS must cite the solicitation number, applicable commercial and Government Entity (CAGE) code of the manufacturer, the part number, and, where so identified, the National Stock Number (NSN). (3) Once submitted under the terms of this contract and approved in accordance with paragraph (1) of this clause, the MSDS and HWLs will be valid for the term of the contract, unless there is a change in the composition of the item or the requirements of Federal Standard 313.

Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery, and price will be evaluated when making a comparative assessment of quotes made in DIBBS. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).

If assistance is needed after award, please contact the Post Award POC listed in block 6 of the DD1155 issued to proposed awardee at time of award; additionally, it is highly recommended that proposed awardee also request Post Award assistance officially by creating a PAR within the DIBBS website at https://www.dibbs.bsm.dla.mil/, this will ensure your request is received and worked properly.

Master Solicitation THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE REVISION OF THE DLA MASTER SOLICITATION FOR MANUAL OR AUTOMATED SIMPLIFIED ACQUISITIONS IN EFFECT ON THE CURRENT SOLICITATION. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/ Offers/eProcurement.aspx

PAGE 3 OF 29 PAGES

SPE7L7-27-Q-0175

PAGE 4 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLIES/SERVICES: 6130-01-673-0176

ITEM DESCRIPTION:

POWER SUPPLY,UNINTE

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RD002, COVERED DEFENSE INFORMATION APPLIES

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

CHEMISTRY: SEALED LEAD ACID BATTERY

MSDS/PSDS REQUIRED PER FED-STD-313

SHELF LIFE TYPE II, 12 MONTHS

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE

RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.

CRITICAL APPLICATION ITEM

MOTOROLA SOLUTIONS, INC. 78205 P/N DSGXT4-1000RT120

PAGE 5 OF 29 PAGES

SPE7L7-27-Q-0175

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 6130-01-673-0176 2.000 EA $ ________________ $ ________________

POWER SUPPLY

,UNINTERRUPTIBLE

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

R20160

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

FPO AP 96694

US

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

R20160

USS KANSAS CITY LCS 22

DLA VENDORS: USE VSM FOR

RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.

M/F: (TCN) R201606299CS28

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 06

PAGE 6 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

DIC: A4A DIST: 9B ADV: FC: NR

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 6130-01-673-0176 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

R20160

USS KANSAS CITY LCS 22

M/F: (TCN) R201606299CS26

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

PAGE 7 OF 29 PAGES

SPE7L7-27-Q-0175

DIC: A4A DIST: 9B ADV: FC: NR

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0003 6130-01-673-0176 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

PAGE 8 OF 29 PAGES

SPE7L7-27-Q-0175

USS KANSAS CITY LCS 22

M/F: (TCN) R201606299CS27

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 06

DIC: A4A DIST: 9B ADV: FC: NR

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0004 6130-01-673-0176 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

PKGING DATA - MIL-STD-2073-1E

PAGE 9 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

R20160

USS KANSAS CITY LCS 22

M/F: (TCN) R201606299CS24

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 06

DIC: A4A DIST: 9B ADV: FC: NR

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0005 6130-01-673-0176 2.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PAGE 10 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

R20160

USS KANSAS CITY LCS 22

PAGE 11 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

M/F: (TCN) R201606299CS29

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 06

DIC: A4A DIST: 9B ADV: FC: NR

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0006 6130-01-673-0176 1.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PAGE 12 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION B

SUPPLY/SERVICE: 6130-01-673-0176 CONT'D

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

USS KANSAS CITY LCS 22

UNIT 100434 BOX 1

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

R20160

USS KANSAS CITY LCS 22

M/F: (TCN) R201606299CS25

RDD: 777

PROJ: ZJ7 TP 2

SUPP ADD: YNCSE1 SIG: A

DIC: A4A DIST: 9B ADV: FC: NR

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7018966867 0001 N/A N/A N/A 10/30/2026

0002 7018966865 0001 N/A N/A N/A 10/30/2026

0003 7018966866 0001 N/A N/A N/A 10/30/2026

0004 7018966863 0001 N/A N/A N/A 10/30/2026

0005 7018966868 0001 N/A N/A N/A 10/30/2026

0006 7018966864 0001 N/A N/A N/A 10/30/2026

PAGE 13 OF 29 PAGES

SPE7L7-27-Q-0175

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

C21 SHIPPING INSTRUCTION REQUEST (SIR) (MAY 2026)

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-15 CERTIFICATE OF CONFORMANCE (APR 1984) FAR

As prescribed in 46.315, insert the following clause in solicitations and contracts for supplies or services when the conditions in 46.504 apply:

(a) When authorized in writing by the cognizant Contract Administration Office (CAO), the Contractor shall ship with a Certificate of Conformance any supplies for which the contract would otherwise require inspection at source. In no case shall the Government's right to inspect supplies under the inspection provisions of this contract be prejudiced. Shipments of such supplies will not be made under this contract until use of the Certificate of Conformance has been authorized in writing by the CAO, or inspection and acceptance have occurred.

(b) The Contractor's signed certificate shall be attached to or included on the top copy of the inspection or receiving report distributed to the payment office or attached to the CAO copy when contract administration (Block 10 of the DD Form 250) is performed by the Defense Contract Administration Services. In addition, a copy of the signed certificate shall also be attached to or entered on copies of the inspection or receiving report accompanying the shipment.

(c) The Government has the right to reject defective supplies or services within a reasonable time after delivery by written notification to the Contractor. The Contractor shall in such event promptly replace, correct, or repair the rejected supplies or services at the Contractor's expense.

(d) The certificate shall read as follows:

“I certify that on , the furnished the supplies or services called for by Contract No. via on in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document.”

Date of Execution:

Signature:

Title:

(End of clause)

E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

[ ] Same as for supplies OR CAGE code:

Address:

Applicable to CLIN(s):

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-29 F.O.B. ORIGIN (FEB 2006) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall -

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table *

Field Name in WAWF Data to be entered in WAWF Guidance

Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a

(SF1449)

(If blank, see resulting award)

Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)

(If blank, see resulting award)

Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)

(If blank, see resulting award)

Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)

Ship To Code SEE SECTION B (If blank, see resulting award)

Ship From Code SEE SECTION B (If blank, see resulting award)

Mark For Code SEE SECTION B (If blank, see resulting award)

Service Approver (DoDAAC)

(If blank, see resulting award)

Service Acceptor (DoDAAC)

(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

Field Name in WAWF Data to be entered in WAWF Guidance

Accept at Other DoDAAC (If blank, see resulting award)

LPO DoDAAC (If blank, see resulting award)

DCAA Auditor DoDAAC (If blank, see resulting award)

Other DoDAAC(s) (If blank, see resulting award)

(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

See administer listed on page 1

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB

2026) FAR

252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN

2023) DFARS

52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR

52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEVIATION 2026-O038) (FEB 2026) FAR

52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 19.101(a)(2)(iii)(A), insert the following clause:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION I - CONTRACT CLAUSES (CONTINUED)

(a) Definitions. As used in this clause -- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern --

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition --

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [] is, [] is not a small business concern under NAICS Code assigned to contract number .

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it [] is, [] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [] is, [] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(6) HUBZone joint venture eligible under the HUBZone Program.[ Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that it [] is, [] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: . ] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's name and title. ]

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR

https://www.sba.gov/document/support--table-size-standards

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION 2026-O0040, REVISION 1) (APR 2026)

FAR

52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR

252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR

USE ON MILITARY INSTALLATIONS (MAR 2024) FAR

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (FEB 2024) DFARS

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM, ALT II (FEB 2024) DFARS

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS

252.225-7006 ACQUISITION OF THE AMERICAN FLAG (DEC 2022) DFARS

252.225-7013 DUTY-FREE ENTRY (OCT 2025) DFARS

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS

52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024) FAR

52.232-1 PAYMENTS (APR 1984) FAR

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR

52.232-11 EXTRAS (APR 1984) FAR

52.232-25 PROMPT PAYMENT (JAN 2017) FAR

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023) FAR

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) DFARS

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS

52.233-1 DISPUTES (MAY 2014) FAR

52.233-3 PROTEST AFTER AWARD (DEVIATION 2026-O0038) (FEB 2026) FAR

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR

52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION I - CONTRACT CLAUSES (CONTINUED)

(e) Governmentwide exclusion and removal orders.

(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e) (1). [Contracting Officer must select either “yes” or “no” for each of the following types of FASCSA orders:] Yes [] No [] DHS FASCSA Order Yes [] No [] DoD FASCSA Order Yes [] No [] DNI FASCSA Order

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) DFARS

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) DFARS

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (DEVIATION 2026-O0025)

(JUN 2026) DFARS

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) DFARS

252.225-7051 PROHIBITION ON ACQUISITION OF CERTAIN FOREIGN COMMERCIAL SATELLITE SERVICES (DEC 2022) DFARS

252.240-7995 PROHIBITION ON CONTRACT AWARDS WITH ENTITIES THAT CONTRACT WITH LOBBYISTS FOR CHINESE

MILITARY COMPANIES -- REPRESENTATION (DEVIATION 2026-O0025) (SEP 2026) DFARS

Standard Element ZB_240_7999 has no Title

52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS

52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION 2026-O0038) (FEB 2026)

FAR

(a) Definitions. As used in this clause -- Commercial product, commercial service and nondevelopmental item have the meanings contained in Federal Acquisition Regulation (FAR) 2.101.

Subcontract has the meaning at FAR 44.401

(b) Requirements.

(1) To the maximum extent practicable, the Contractor shall incorporate, and require its subcontractors at all tiers to incorporate, commercial products, commercial services, or non-developmental items as components of items to be supplied under this contract.

(2) If a clause in the following table is included in the contract, the Contractor shall insert the clause in subcontracts for commercial products or commercial services and must flow down the requirements of the clause to subcontracts as indicated in the specific clause:

Number Title Date 52.203-13 Contractor Code of

Business Ethics and Conduct

NOV 2021

52.203-17 Contractor Employee Whistleblower Rights

NOV 2023

52.203-19 Prohibition on Requiring Certain Internal

Confidentiality Agreements or Statements

JAN 2017

52.204-9 Personal Identity Verification of Contractor

Personnel

JAN 2011

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 29 PAGES

SPE7L7-27-Q-0175

SECTION I - CONTRACT CLAUSES (CONTINUED)

Number Title Date 52.219-8* Utilization of Small

Business Concerns

JAN 2025

52.222-35 Equal Opportunity for Veterans

JUN 2020

52.222-36 Equal Oppurtunity for Workers with Disabilities

JUN 2020

52.222-37 Employment Reports for Veterans

JUN 2020

52.222-40 Notification of Employee Rights Under the National

Labor Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards

AUG 2018

52.222-50 Combating Trafficking in Persons

NOV 2021

52.222-50 with Alt I Combating Trafficking in Persons, with its Alternate I

MAR 2015

52.222-51 Exemption from Application of the Service Contract

Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment -

Requirements

MAY 2014

52.222-53 Exemption from Application of the Service Contract

Labor Standards to Contracts for Certain

Services - Requirements

MAY 2014

52.222-54 Employment Eligibility Verification

JAN 2025

52.222-62 Paid Sick Leave Under Executive Order 13706

JAN 2022

52.224-3 Privacy Training JAN 2017 52.224-3 with Alt I Privacy Training, with

Alternate I

JAN 2017

52.225-26 Contractors Performing Private Security Functions Outside the United States

OCT 2016

52.232-40 Providing Accelerated Payments to Small

Business Subcontractors

MAR 2023

52.240-91 Security Prohibitions and Exclusions

DATE

52.240-91 with Alt I Security Requirements, with its Alternate I

DATE

52.240-92 Security Requirements DATE 52.240-92 with Alt II Security Requirements, with its Alternate II

DATE

52.247-64 Preference for Privately Owned U.S.-Flag

Commercial Vessels

NOV 2021

* Include only if the subcontract offers further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.109(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(c) Subcontracts. The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 29 PAGES

SPE7L7-27-Q-0175

252.244-7000 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (NOV 2023) DFARS

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) DFARS

252.246-7007 CONTRACTOR COUNTERFEIT ELECTRONIC PART DETECTION AND AVOIDANCE SYSTEM (JAN 2023) DFARS

252.246-7008 SOURCES OF ELECTRONIC PARTS (JAN 2023) DFARS

52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006) FAR

As prescribed in 47.104-4, insert the following clause:

When the Contracting Officer authorizes supplies to be shipped on a commercial bill of lading and the Contractor will be reimbursed these transportation costs as direct allowable costs, the Contractor shall ensure before shipment is made that the commercial shipping documents are annotated with either of the following notations, as appropriate:

(a) If the Government is shown as the consignor or the consignee, the annotation shall be: Transportation is for the [name the specific agency] and the actual total transportation charges paid to the carrier(s) by the consignor or consignee are assignable to, and shall be reimbursed by, the Government.

(b) If the Government is not shown as the consignor or the consignee, the annotation shall be:

Transportation is for the [name the specific agency] and the actual total transportation charges paid to the carrier(s) by the consignor or consignee shall be reimbursed by the Government, pursuant to cost-reimbursement contract No. . This may be confirmed by contacting [Name and address of the contract administration office listed in the contract].

52.247-68 REPORT OF SHIPMENT (RESHIP) (FEB 2006) FAR

252.247-7023 TRANSPORATION OF SUPPLIES BY SEA --- BASIC (OCT 2024) DFARS

Basic. As prescribed in 247.574(b) and (b)(1), use the following clause:

(a) Definitions. As used in this clause -- “Foreign-flag vessel” means any vessel that is not a U.S.-flag vessel.

“Ocean transportation” means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

“Subcontractor” means a supplier, materialman, distributor, or vendor at any level below the…