SPE7L427T0625.pdf

PDF 452 KB Posted Oct 26, 2026

Attached to: SEAT,VEHICULAR
Solicitation number: SPE7L427T0625
Issued by: Defense Logistics Agency Land and Maritime

View the file

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE7L4-27-T-0625

2. DATE ISSUED

2026 OCT 26

3. REQUISITION/PURCHASE REQUEST NO.

7018834075

RATING

DO-C9

DLA WEAPONS SUPPORT

LSO COMBAT VEHICLES AND ARMAMENT

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Name: ANNA-RACHELLE BETTS Buyer Code:PLCL69F Tel: 614-692-3770 Email: dla.flda1prs@dla.mil

6. DELIVER BY (Date)

165 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 05

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 28

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 28 PAGES

SPE7L4-27-T-0625

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

FAR 52.219-6 Notice of Total Small Business Set-Aside

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336360

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

THE MANUFACTURERS INSPECTION SYSTEM AT A MINIMUM MUST COMPLY WITH SAE

AS9003 OR ISO 9001 TAILORED TO THE REQUIREMENTS OF SAE AS9003. IF THE

STANDARD THAT APPLIES TO YOUR COMPANY IS NOT AVAILABLE ON DIBBS AS A

SELECTION, THEN SELECT “OTHER” THEN SPECIFY WHAT “OTHER EQUIVALENT”

PAGE 3 OF 28 PAGES

SPE7L4-27-T-0625

SECTION A

STANDARD APPLIES.

Fast Pay does not apply to this solicitation

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PAGE 4 OF 28 PAGES

SPE7L4-27-T-0625

SECTION A

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

PAGE 5 OF 28 PAGES

SPE7L4-27-T-0625

SECTION A

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

PAGE 6 OF 28 PAGES

SPE7L4-27-T-0625

SECTION A

Procurement History for NSN/FSC:016601460/2540

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

4M107 SPE7L426V2461 1.000 11950.00000 20260827 N

1A424 SPE7L326P4553P00001 11.000 11882.00000 20260702 N

4M107 SPE7L326P0249 1.000 16995.00000 20251007 N

4M107 SPE7L325P5428 12.000 9395.00000 20250701 N

4M107 SPE7L325P0673P00001 29.000 8495.00000 20241119 N

4M107 SPE7L424V2518P00001 13.000 8495.00000 20240916 N

4M107 SPE7L124P6376P00001 3.000 9985.00000 20240624 N

4M107 SPE7L322V028P 1.000 11925.00000 20220525 N

4M107 SPE7L422V0384 1.000 11925.00000 20220126 N

4M107 SPE7L422V0053 1.000 11925.00000 20211006 N

4M107 SPE7L421V1054 1.000 11925.00000 20210503 N

4M107 SPE7L521V0029 1.000 12950.00000 20201007 N

4M107 SPE7L020V8499 1.000 11950.00000 20200824 N

4M107 SPE7L518V2091P00001 1.000 9500.00000 20180720 N

4M107 SPE7L518V2058P00001 1.000 9500.00000 20180716 N

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 7 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

PR: 7018834075

NSN/MATERIAL:2540016601460

ITEM DESCRIPTION

SEAT,VEHICULAR

SEAT, VEHICULAR

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national

PAGE 8 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RT001: MEASURING AND TEST EQUIPMENT

QUALITY ASSURANCE PROVISION

I/A/W QAP's 7963569, 12329861, 12329883

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

CRITICAL APPLICATION ITEM

PAGE 9 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW BASIC DRAWING NR 19207 12581771

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909343

REVISION NR A DTD 07/31/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909344

REVISION NR A DTD 07/31/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909345

REVISION NR B DTD 07/31/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909346

REVISION NR A DTD 07/31/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909348

REVISION NR B DTD 08/03/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19200 10909352

REVISION NR E DTD 09/10/1982

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909353

REVISION NR B DTD 09/12/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909354

REVISION NR C DTD 09/12/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10921435

REVISION NR A DTD 06/28/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909347

REVISION NR C DTD 08/03/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909351

REVISION NR B DTD 08/03/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10888571

REVISION NR B DTD 05/15/1981

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 11646971

REVISION NR F DTD 06/28/2026

PART PIECE NUMBER:

PAGE 10 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329943

REVISION NR D DTD 09/02/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329874

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329877

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329878

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329880

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332671

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333172

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404621

REVISION NR E DTD 09/30/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404624

REVISION NR B DTD 07/17/1996

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10902663

REVISION NR A DTD 02/04/1981

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332658

REVISION NR D DTD 01/18/1995

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332659

REVISION NR B DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332660

REVISION NR B DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332675

REVISION NR DTD 02/13/1984

PAGE 11 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963611

REVISION NR 2 DTD 05/22/1957

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404622

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10888570

REVISION NR A DTD 11/21/1994

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333180

REVISION NR C DTD 07/29/1992

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909342

REVISION NR B DTD 07/31/1967

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 19207 12329861

REVISION NR D DTD 06/19/1990

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329862

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329864

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329866

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329867

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329872

REVISION NR DTD 04/26/1985

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329873

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329881

REVISION NR B DTD 10/11/1989

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 19207 12329883

REVISION NR B DTD 06/19/1990

PAGE 12 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333173

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333175

REVISION NR DTD 06/19/1984

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333176

REVISION NR DTD 06/19/1984

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333177

REVISION NR A DTD 11/17/1994

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333178

REVISION NR A DTD 11/17/1994

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333179

REVISION NR DTD 05/17/1984

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333303

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333306

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333311

REVISION NR DTD 06/19/1984

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333568

REVISION NR A DTD 11/17/1994

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12351648

REVISION NR DTD 04/26/1985

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332666

REVISION NR B DTD 01/31/1990

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12369857

REVISION NR DTD 08/28/1990

PAGE 13 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 8740261

REVISION NR DTD 05/02/1956

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12308427

REVISION NR G DTD 05/07/2024

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404151

REVISION NR AC DTD 09/30/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329861

REVISION NR D DTD 01/18/1995

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329879

REVISION NR C DTD 08/18/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329882

REVISION NR E DTD 08/18/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329883

REVISION NR H DTD 08/18/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332646

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332648

REVISION NR A DTD 11/01/1988

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332649

REVISION NR C DTD 01/31/1990

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332673

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333168

REVISION NR B DTD 08/18/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333304

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333567

REVISION NR A DTD 01/29/1987

PAGE 14 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333569

REVISION NR A DTD 01/29/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12376426

REVISION NR A DTD 01/18/1995

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19204 CAZX2

REVISION NR 10 DTD 11/09/1964

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404612

REVISION NR B DTD 11/30/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404619

REVISION NR B DTD 11/30/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404620

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404671

REVISION NR A DTD 07/17/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12339948

REVISION NR A DTD 10/17/1986

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12463283

REVISION NR DTD 04/28/1999

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 21450 CAZX2

REVISION NR 10 DTD 11/09/1964

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19200 10909362

REVISION NR B DTD 04/27/1998

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19200 10909365

REVISION NR B DTD 04/27/1998

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909357

REVISION NR A DTD 02/17/1965

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909360

REVISION NR B DTD 04/22/1969

PAGE 15 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909362

REVISION NR A DTD 02/17/1965

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10909364

REVISION NR A DTD 02/17/1965

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10921434

REVISION NR A DTD 02/17/1965

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 10922508

REVISION NR DTD 02/02/1962

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12332669

REVISION NR B DTD 05/06/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333446

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333464

REVISION NR A DTD 01/27/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12333465

REVISION NR A DTD 01/28/1987

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12369002

REVISION NR H DTD 12/15/2011

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963569

REVISION NR A DTD 11/04/1985

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12297780

REVISION NR R DTD 09/12/2008

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12308492

REVISION NR B DTD 06/01/2009

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR C DTD 05/17/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE QAP 19207 7963569

REVISION NR C DTD 11/04/1985

PAGE 16 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963570

REVISION NR B DTD 04/26/1966

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963571

REVISION NR A DTD 12/16/1965

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963572

REVISION NR DTD 05/28/1951

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7963573

REVISION NR A DTD 03/20/1996

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 11646971

REVISION NR E DTD 03/24/2004

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 7404606

REVISION NR A DTD 09/30/1997

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12472301

REVISION NR B DTD 09/25/2017

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581266

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12577737

REVISION NR A DTD 01/29/2026

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581772

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581773

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581771

REVISION NR DTD 04/05/2022

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581267

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581268

REVISION NR DTD 07/01/2015

PAGE 17 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581269

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581270

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581773

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581774

REVISION NR DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12581771

REVISION NR DTD 11/12/2018

PART PIECE NUMBER:

TDP Rev C Gen 3

IAW REFERENCE DRAWING NR 19207 12329866

REVISION NR DTD 04/06/2020

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7018834075 0001 EA 3.000

NSN/MATERIAL:2540016601460

DELIVERY (IN DAYS):0165

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

PAGE 18 OF 28 PAGES

SPE7L4-27-T-0625

SECTION B

PR: 7018834075 PRLI: 0001 CONT’D

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

SW3120

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

SW3120

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

Need Ship Date:04/20/2027 Original Required Delivery Date:10/10/2027

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 28 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 28 PAGES

SPE7L4-27-T-0625

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 28 PAGES

SPE7L4-27-T-0625

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if applicable

Ship From Code See Resulting Award if applicable

Mark For Code See Resulting Award if applicable

Service Approver (DoDAAC)

See Resulting Award if applicable

Service Acceptor (DoDAAC)

See Resulting Award if applicable

Accept at Other DoDAAC See Resulting Award if applicable

LPO DoDAAC See Resulting Award if applicable

DCAA Auditor DoDAAC See Resulting Award if applicable

Other DoDAAC(s) See Resulting Award if applicable

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Contact the local contract administrator found in block 6 of the DD 1155 (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7999 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (DEVIATION 2026-O0015) (FEB 2026)

(DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 28 PAGES

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) (DFARS)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA—BASIC (OCT 2024) (DFARS)

(a) Definitions. As used in this clause -- "Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

"U.S.-flag vessel" means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116.

(b) If the transportation of supplies by sea is anticipated under this contract, the Contractor shall --

(1) Notify the Contracting Officer and Maritime Administration (MARAD) at Cargo.Marad@dot.gov --

(i) Within 3 business days after contract award; or

(ii) Immediately prior to the shipment departure date necessary to meet delivery schedules, whichever is earlier; and

(2) Include in the notification --

(i) A statement of the Contractor's intent to transport supplies by sea;

(ii) The contract number; and

(iii) The task-order or delivery-order number, when applicable.

(c)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that -- (1)The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b. destination shipment);

(2)Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or (3)Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(d) The Contractor and its subcontractors may request, via the Contracting Officer, a waiver of the requirement to use a U.S.-flag vessel, or identification of any available U.S.-flag vessels, if the Contractor or a subcontractor sufficiently explains that --

(1) U.S.-flag vessels are not available at a fair and reasonable rate for commercial vessels of the United States; or

(2) U.S.-flag vessels are otherwise not available.

(e) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, however, if a DoD waiver is not approved prior to the shipper's sailing date, this will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date(s) and required delivery date(s);

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of current, diligent efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of quotes will suffice for this purpose. Copies of telephone notes, emails, and other relevant communications will otherwise be considered for this purpose.

(f) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and MARAD at Cargo.Marad@dot.gov, Attention: Military Team, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of the carrier.

(g) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief --https://www.ecfr.gov/current/title-33/section-2.24 https://www.govinfo.gov/link/uscode/46/116 mailto:Cargo.Marad@dot.gov mailto:Cargo.Marad@dot.gov

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 23 OF 28 PAGES

SPE7L4-27-T-0625

SECTION I - CONTRACT CLAUSES (CONTINUED)

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had received a prior-approved waiver for U.S.-flag vessels for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of DoD. The Contractor shall describe these shipments in the following format:

ITEM DESCRIPTION CONTRACT LINE ITEMS QUANTITY

TOTAL

(h) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.

(i) If the Contractor did not anticipate transporting any supplies by sea at the time of contract award and, therefore, did not provide the notification required by paragraph (b) of this clause, but prior to shipment of supplies, the Contractor learns that supplies will be transported by sea, the Contractor shall --

(1) Provide the notification required by paragraph (b) of this clause to the Contracting Officer and MARAD as soon as it is known that supplies will be transported by sea; and

(2) Comply with all the terms and conditions of this clause.

(j) Subcontracts. In the award of subcontracts, for the types of supplies described in paragraph (c)(2) of this clause, including subcontracts for commercial products, the Contractor shall flow down the requirements of this clause as follows:

(1) The Contractor shall insert the substance of this clause, including this paragraph (j), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

(2) The Contractor shall insert the substance of paragraphs (a) through (f) of this clause, and this paragraph (j), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

252.247-7025 REFLAGGING OR REPAIR WORK (OCT 2024) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)

52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS -- SIMPLIFIED ACQUISITIONS (NONCOMMERCIAL) (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.216-1 TYPE OF CONTRACT (DEVIATION 2026-O0038) (FEB 2026) (FAR)

The Government contemplates award of a ______________ [Contracting Officer insert specific type of contract] contract resulting from this solicitation.

52.216-1 ALT I TYPE OF CONTRACT, ALT I (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (DEVIATION 2026-O0038) (FEB 2026) (FAR) Insert the clause at 52.219-28, Postaward Small Business Program Rerepresentation, in solicitations and contracts exceeding the micro-purchase threshold when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas,…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 4, 2026.