0057457474_Item_Description_NSN_2510-01-626-4650.docx

NSN 2510-01-626-4650 ITEM DESCRIPTION

INSTALLATION KIT,VEHICULAR EQUIPMENT

EXCEPTION TO DRAWING 12512221 NOTE 7:

FINISH IAW 12369001 IN LIEU OF 12369003.

EXCEPTION TO ARMOR PLATE DRAWINGS LISTING WELIDING SPECIFICATION:

ALL WELDS SHALL BE IN ACCORDANCE WITH DRAWING

12479550 (critical weld) IN LIEU OF AWS D1.1.

EXCEPTIONS TO DWG 12512221,SHEET 1:

-ADD NOTE 13: WELD IAW DWG 12472301

GROUND COMBAT VEHICLE WELDING CODE ALUMINUM

NON-CRITICAL WELDS.

-ADD NOTE 14: HIDDEN LINES HAVE BEEN REMOVED

IN FRONT VIEW FOR CLARIFICATION.

-ZONE D3: DIMENSION SHALL BE 1.75 ILO 1.750

-ZONE D3: DIMENSION SHALL BE 2.75 ILO 2.675

-ZONE C3: DIMENSION SHALL BE .75 ILO .625

-ZONE C3: DIMENSION SHALL BE .25 ILO .250

EXCEPTIONS TO DWG 12512221,SHEET 2:

-ZONE G8: DIMENSION SHALL BE R2.75 ILO R3.19

-ZONE D6: AREA TO BE DE-ICED MINIMUM SHALL

BE 392 IN SQUARED NOT 817 IN SQUARED.

EXCEPTION TO DRAWING TECHNICAL DATA PACKAGE LIST

57K6235, page 3:

-DWG 12512221 SHALL BE "BLANK" REVISION ILO B.

ALTERNATE DESIGN TO WINDSHIELD ASSEMBLY;

CONTRACTOR MAY ELECT TO USE DRAWING 12512206

DESIGN FOR WINDOW AND FRAME; WITH DE-ICER

REQUIREMENTS AND PLUG (MS27142) IAW DWG 12512221.

PRE-PRODUCTION CRITICAL WELD DOCUMENTATION SHALL BE IN ACCORDANCE WITH DWG 12479550, SECTION 4 TO INCLUDE WPS, WELDER QUALIFICATION AND PQR DOCUMENTATION. POST-PRODUCTION INSPECTION SHALL BE IN ACCORDANCE WITH TABLE 6.1 FOR CRITICAL WELDS.

GFAT and CFAT applies IAW SQAP016264650:

-Contractor First Article Test, 3 exhibits, ,,due 120 days.

-Government Fit Test, 2 exhibits, due 120 days.

PER FAR 52.209-4:

(a) THE CONTRACTOR SHALL DELIVER THE Government

FIRST ARTICLE UNITS TO:

DLA Product Test Center, Columbus, SL0702 3990 East Broad Street Building 9, Section 2

DSCC-TM

ATTN: Don Durbin Columbus, OH 43218-3990

(b) WITHIN 45 CALENDAR DAYS AFTER THE GOVERNMENT RECEIVES THE FIRST

ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE CONTRACTOR OF THE

APPROVAL, CONDITIONAL APPROVAL OR DISAPPROVAL OF THE FIRST ARTICLE.

DISPOSITION OF GOVERNMENT FIRST ARTICLE SAMPLES:

THE GOVERNMENT SHALL RETAIN ALL FIRST ARTICLE UNITS.

THE GOVERNMENT SHALL NOT RETURN THE FIRST ARTICLES TO THE CONTRACTOR, BECAUSE THE ITEMS SHALL CONSUMED DURING TESTING.

ALL TESTS MUST BE APPROVED BY PCO PRIOR TO PRODUCTION.

Material certification per SQAP016264650, para 2.1.A. is required in the form of Certificate of Quality Conformance (COQC) regardless if FAT is waived or not.

Production Control Test is required per SQAPATPD2352, para 4.0 whether first article is required or not.

Product inspection will be conducted by the DCMA QAR at the actual manufacturer's facility.

The identification of the actual manufacturer must be submitted to the contracting officer for inclusion in the award. Upon award, any changes to the above must be approved by the PCO via formal contract modification.

THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE S, WITH A TOTAL SHELF LIFE OF SIXTY MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL HAVE AT LEAST 85% (51 MONTHS) OF SHELF LIFE REMAINING AT TIME OF DELIVERY.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

FAR CLAUSE 52.246-11 APPLIES. A QUALITY MANAGEMENT PROGRAM MEETING THE

REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008

(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;

OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008

(EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE

OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS

REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES

WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS

EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual, [excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2 Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internal audit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S).

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL APPLICABLE QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS FOR THE KIT COMPONENTS BEING SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR OBTAINING, HANDLING AND SUPPLYING ORIGINAL EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS

INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH

REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR PROCESS THAT WILL ENSURE TRACEABILITY OF ALL PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE

MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE

REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS THAT ARE KNOWN TO BE ACCEPTABLE TO THE GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS REFLECTED IN THE GOVERNMENT'S CONTRACT TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY ONLY NEW AND UNUSED PARTS THAT ARE NOT

GOVERNMENT SURPLUS PARTS.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY

CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25."

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 57K6235

REVISION NR A DTD 01/14/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387272

REVISION NR A DTD 07/12/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12338860

REVISION NR A DTD 06/01/2001

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12338860

REVISION NR DTD 08/05/1987

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10910174

REVISION NR AW DTD 07/14/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387279

REVISION NR DTD 01/27/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469117

REVISION NR B DTD 11/29/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387327

REVISION NR B DTD 06/22/2006

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-46100E(1) NOT 2

REVISION NR 1 DTD 10/03/2006

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R

REVISION NR R DTD 10/03/2006

PART PIECE NUMBER: SHELF-LIFE 60 MONTHS

IAW REFERENCE DRAWING NR 19207 12480694

REVISION NR DTD 08/10/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12480693

REVISION NR A DTD 11/07/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B DTD 11/18/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12472301

REVISION NR A DTD 04/30/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 ATPD-2352

REVISION NR T DTD 05/08/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12512206

REVISION NR B DTD 03/20/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13014026

REVISION NR DTD 06/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12480694

REVISION NR DTD 08/10/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B DTD 09/04/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B DTD 09/04/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339505

REVISION NR D DTD 05/13/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529045

REVISION NR DTD 03/31/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529049

REVISION NR DTD 09/28/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529050

REVISION NR DTD 06/17/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529051

REVISION NR DTD 10/04/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529052

REVISION NR DTD 09/28/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529053

REVISION NR DTD 02/18/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529054

REVISION NR DTD 02/18/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529055

REVISION NR DTD 02/18/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529056

REVISION NR DTD 02/18/2011

IAW REFERENCE DRAWING NR 19207 12529057

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529062

REVISION NR DTD 09/28/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529063

REVISION NR DTD 09/30/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529064

REVISION NR DTD 09/30/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529065

REVISION NR DTD 09/28/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12529070

REVISION NR DTD 03/28/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536881

REVISION NR DTD 03/28/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536882

REVISION NR DTD 03/28/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536926

REVISION NR DTD 02/18/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536927

REVISION NR A DTD 02/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536928

REVISION NR A DTD 02/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536929

IAW REFERENCE DRAWING NR 19207 12536935

REVISION NR A DTD 02/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12536936

REVISION NR A DTD 02/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12537000

REVISION NR DTD 09/30/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K6235

REVISION NR DTD 02/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13014028

REVISION NR DTD 06/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13014027

REVISION NR DTD 06/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13013705

REVISION NR DTD 03/31/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13015296

REVISION NR DTD 10/10/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13014031

REVISION NR DTD 06/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12537026

REVISION NR DTD 09/24/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12537025

REVISION NR DTD 09/30/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12561460

REVISION NR DTD 02/01/2013

IAW REFERENCE DRAWING NR 19207 12561435

REVISION NR DTD 02/01/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12540124

REVISION NR DTD 02/01/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B DTD 11/18/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12512221

REVISION NR DTD 02/21/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12537027

REVISION NR DTD 09/24/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369001

REVISION NR D DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAPATPD2352

REVISION NR A DTD 12/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12563731

REVISION NR A DTD 01/14/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B DTD 11/18/2008

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP016264650

REVISION NR B DTD 02/25/2015

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:00 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN

ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W

MIL-STD-129.

PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT

TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE

THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT

(THAT IS, 1 OF 2, 2 OF 2, ETC.)

CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE

OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS

WITHIN THE KIT.