SPE7L127T4295.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE7L1-27-T-4295

2. DATE ISSUED

2026 NOV 06

3. REQUISITION/PURCHASE REQUEST NO.

7019021679

RATING

DO-C9

DLA WEAPONS SUPPORT

LAND SUPPLY CHAIN

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Name: CHANTEL JOSEY Buyer Code:PLCL70M Tel: 6146052455 Email: CHANTEL.JOSEY@DLA.MIL

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 16

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 34

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

FAR 52.219-30 Notice of Set-aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small

Business Program

NOTE: FAR 19.1503 requires women-owned small business (WOSB) and economically disadvantaged women-owned small business (EDWOSB) concerns to be certified by the Small Business Administration (SBA). Only vendors that are certified by SBA or an approved third-party certifier are eligible for WOSB or EDWOSB set-asides or sole source contracts.

https://www.sba.gov/federal-contracting/contracting-assistance-programs/ women-owned-small-business-federal-contracting-program#section-header-6

FAR 52.219-14 Limitations on Subcontracting (FEB 2023)(Deviation 2021-

O0008).

The Non-Manufacturer rule is not waived.

FAR 52.219-33 Nonmanufacturer Rule

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 333613

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself

PAGE 3 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

THE MANUFACTURERS INSPECTION SYSTEM AT A MINIMUM MUST COMPLY WITH ISO

9001:2015 OR OTHER EQUIVALENT. IF QUOTING 'OTHER EQUIVALENT' SPECIFY

WHAT 'OTHER EQUIVALENT' STANDARD APPLIES.

Fast Pay does not apply to this solicitation

FIRST ARTICLE APPROVAL – CONTRACTOR TESTING REQUIRED (FAR 52.209-3 and

ALT I)

THE CONTRACTOR SHALL TEST 2 UNIT(S) OF

LOT/ITEM 2520 / 12350450 AS

SPECIFIED IN THIS CONTRACT. PROVIDE WRITTEN NOTICE TO THE CONTRACTING

OFFICER AND THE QAR AT LEAST FOURTEEN (14) CALENDAR DAYS PRIOR TO

SHIPMENT TO GOVERNMENT FOR FAT, TO ACCOMODATE IN-PROCESS VERIFICATION

AND/OR FINAL INSPECTION BY THE QAR. THE CONTRACTOR SHALL SUBMIT THE

FIRST ARTICLE TEST REPORT WITHIN 90 CALENDAR

DAYS FROM THE DATE OF THIS CONTRACT. NOTIFICATION AND SUBMITTAL

ADDRESSES ARE IAW PROCUREMENT NOTE H03. WITHIN

30 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE TEST REPORT, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE. SEE PROCUREMENT NOTE H03:

SUPPLEMENTAL FIRST ARTICLE TESTTING REQUIREMENTS (SEP 2016) - FOR

ADDITIONAL FAT REQUIREMENTS.

DISPOSITION OF FIRST ARTICLES:

Procurement Note E01: Supplemental First Article Exhibit Disposition -

PAGE 4 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

Contractor Maintained (MAY 2020)

The first article units will be maintained or returned to the contractor to be used as a manufacturing standard. The contractor shall hold the approved first article units at the production facility until all production quantities have been produced and accepted. In the case of indefinite delivery contracts, the contractor shall hold the first article units until final production run has been approved and accepted on the first delivery order. The unit shall be considered a production guide or manufacturing standard if defects are reported on delivered material or problems are encountered during production. When disposing the units, the contractor shall follow DFARS 252.245-7004(d).

FIRST ARTICLE – CONTRACTOR TESTING – DCMA DELEGATION

Notice to Contractor: The Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) is delegated the authority to approve/disapprove the First Article Test Report submitted in accordance with the requirements in this contract. Any reference to the Contracting Officer as it relates to submission of and approval/disapproval of the FAT Report shall be deemed to mean the DCMA

ACO.

Notice to ACO: The DCMA ACO shall forward a copy of the First Article Test Report and the DCMA ACO’s letter of approval/disapproval to the Contracting Officer at the buying activity and to the address identified in FAR Clause 52.209-3(b).

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

PAGE 5 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

PAGE 6 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not

PAGE 7 OF 34 PAGES

SPE7L1-27-T-4295

SECTION A

eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

Procurement History for NSN/FSC:012350450/2520

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

02AV2 SPE7L321C0008P00003 345.000 8380.96000 20210310 N

51819 SPE7L320P5405P00004 51.000 6175.00000 20200701 N

51819 SPE7L320P5188P00003 29.000 6500.00000 20200610 N

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 8 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

PR: 7019021679

NSN/MATERIAL:2520012350450

ITEM DESCRIPTION

MODIFICATION KIT,VEHICULAR EQUIPMENT COM

MODIFICATION KIT, VEHICULAR

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RD002, COVERED DEFENSE INFORMATION APPLIES

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

RT001: MEASURING AND TEST EQUIPMENT

FULL AND OPEN COMPETITION APPLY

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United

PAGE 9 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

RQ036- Phosphate Coating Supplier Certification Requirements

RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING

ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE

UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE

TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE

DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER

BEARINGS.

PAGE 10 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT

https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN

A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND

HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO

PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD

FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL

REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED

WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE

RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS

225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.

Casting and Forging information was added to the POT to enhance the solicitation process. Please do not remove. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

This material has specialty metal requirements. DFARS 252.225-7008, DFARS 252.225-7009, and DFARS 252.225-7010 apply to this award if over the Simplified Acquisition Threshold.

If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract.

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

CDRL-81361CARPH-17272

PURCHASED PARTS: 11663357, 12273147, 12273148, 12273163, 12273165,

12287274, 12310653, 12311307, 12311336, 12311337, 12312237, 12324290 12346073, 12347278, 12346066 NOTE: TDP 02(PN12472949) is an attachment to ECP TACHBCT0100. TDP02 is required because it replaces Wire Harness Assy 12324505 with Wire Harness Assy 12472949 11663357 12273147 12273148 12273163 12273165 12287274 12310653 12311307 12311336 12311337 12312237 12324290 12346066 12346073 12347630 12347631 12387118 12387120 12387121 12387131

TDP Rev E Gen 12

IAW BASIC DRAWING NR 19207 12344185

REVISION NR H DTD 10/06/2000

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346286

REVISION NR DTD 07/09/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12273440

REVISION NR J DTD 07/24/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283901

REVISION NR M DTD 10/20/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324290

PAGE 11 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR G DTD 01/28/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346283

REVISION NR A DTD 09/26/2005

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346284

REVISION NR A DTD 09/26/2005

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346285

REVISION NR DTD 08/06/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346456

REVISION NR DTD 08/06/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387279

REVISION NR C DTD 10/03/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387304

REVISION NR A DTD 02/06/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12345803

REVISION NR DTD 05/01/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346472

REVISION NR D DTD 06/19/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 12273456

REVISION NR U DTD 10/21/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 10905840

REVISION NR G DTD 07/09/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12347631

REVISION NR K DTD 03/10/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12267265

REVISION NR B DTD 05/24/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12345844

REVISION NR E DTD 11/30/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12282776

PAGE 12 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR F DTD 11/13/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387131

REVISION NR L DTD 01/03/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324433

REVISION NR A DTD 03/25/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273427

REVISION NR G DTD 10/29/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7707660

REVISION NR J DTD 10/18/1966

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708162

REVISION NR E DTD 11/21/1966

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708155

REVISION NR D DTD 10/18/1966

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708158

REVISION NR F DTD 09/25/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708079

REVISION NR G DTD 09/29/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708156

REVISION NR F DTD 09/25/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708157

REVISION NR H DTD 08/01/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 10910174

REVISION NR BA DTD 11/21/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12284290

REVISION NR C DTD 03/21/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12287267

REVISION NR D DTD 09/17/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12287559

PAGE 13 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR E DTD 05/24/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12301789

REVISION NR D DTD 09/09/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12311307

REVISION NR B DTD 10/16/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12323673

REVISION NR F DTD 01/10/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387269

REVISION NR G DTD 08/08/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387310

REVISION NR E DTD 08/02/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387349

REVISION NR D DTD 06/15/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387350

REVISION NR C DTD 10/16/2020

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387561

REVISION NR C DTD 02/05/2020

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12267264

REVISION NR B DTD 05/23/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12304640

REVISION NR G DTD 09/09/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12304640

REVISION NR H DTD 06/03/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346281

REVISION NR A DTD 09/27/2005

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346471

REVISION NR C DTD 10/28/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12346471

PAGE 14 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR B DTD 01/07/1997

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324517

REVISION NR P DTD 02/05/2026

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346282

REVISION NR A DTD 09/26/2005

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346294

REVISION NR B DTD 06/21/2019

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346450

REVISION NR A DTD 10/14/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324237

REVISION NR D DTD 10/05/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387152

REVISION NR G DTD 07/28/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273832

REVISION NR F DTD 09/23/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12310653

REVISION NR C DTD 02/01/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12337887

REVISION NR G DTD 07/25/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12337893

REVISION NR B DTD 05/23/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12345432

REVISION NR C DTD 08/17/1996

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273131

REVISION NR D DTD 06/30/1993

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273762

REVISION NR K DTD 08/05/1988

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12273832

PAGE 15 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR E DTD 07/16/1982

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324427

REVISION NR C DTD 02/05/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324428

REVISION NR C DTD 09/21/2004

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324429

REVISION NR B DTD 11/11/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324432

REVISION NR B DTD 03/25/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324434

REVISION NR C DTD 03/18/2009

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12312237

REVISION NR L DTD 04/14/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12316316

REVISION NR C DTD 10/31/1995

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12345259

REVISION NR C DTD 09/23/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7707413

REVISION NR F DTD 01/23/1997

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 8350965

REVISION NR L DTD 08/01/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 SD-X12143

REVISION NR A DTD 09/14/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12337890

REVISION NR B DTD 09/12/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12337891

REVISION NR B DTD 01/25/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12337892

PAGE 16 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR A DTD 01/11/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387277

REVISION NR B DTD 05/23/2019

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SD-X12142

REVISION NR F DTD 01/09/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12312067

REVISION NR J DTD 10/05/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324430

REVISION NR D DTD 10/10/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SC-X15528

REVISION NR DTD 11/16/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387327

REVISION NR H DTD 07/30/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273440

REVISION NR J DTD 11/25/1996

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273751

REVISION NR K DTD 09/23/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273759

REVISION NR J DTD 10/10/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273816

REVISION NR G DTD 04/08/1993

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273826

REVISION NR J DTD 06/07/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273827

REVISION NR K DTD 06/07/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273833

REVISION NR D DTD 03/13/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273854

PAGE 17 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR L DTD 06/22/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273876

REVISION NR J DTD 06/13/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273877

REVISION NR C DTD 10/10/1990

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273888

REVISION NR D DTD 05/24/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283737

REVISION NR F DTD 08/09/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283740

REVISION NR H DTD 02/23/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283741

REVISION NR F DTD 02/01/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283742

REVISION NR E DTD 09/09/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283745

REVISION NR E DTD 08/12/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283795

REVISION NR H DTD 09/14/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12285193

REVISION NR C DTD 11/02/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12285282

REVISION NR G DTD 03/24/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 12273717

REVISION NR P DTD 12/10/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 12347631

REVISION NR U DTD 02/26/2025

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387118

PAGE 18 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR AA DTD 07/30/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273149

REVISION NR P DTD 09/25/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12287274

REVISION NR T DTD 10/16/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12344343

REVISION NR R DTD 08/01/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283752

REVISION NR D DTD 03/25/1991

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12283754

REVISION NR D DTD 09/09/1994

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12347278

REVISION NR J DTD 11/04/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12283742

REVISION NR D DTD 02/20/1996

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 SC-X15111

REVISION NR K DTD 12/09/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SC-X15112

REVISION NR H DTD 12/09/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 ATPD-2167

REVISION NR A DTD 09/06/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12312067

REVISION NR B DTD 10/13/1987

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 11663357

REVISION NR AA DTD 10/17/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12304641

REVISION NR G DTD 02/23/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273165

PAGE 19 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR K DTD 03/17/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387121

REVISION NR U DTD 07/30/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12347630

REVISION NR T DTD 10/22/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12387131

REVISION NR E DTD 07/01/2015

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12273751

REVISION NR F DTD 08/19/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273147

REVISION NR Y DTD 07/25/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387120

REVISION NR W DTD 07/30/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12387120

REVISION NR L DTD 03/06/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7707655

REVISION NR F DTD 10/18/2010

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708078

REVISION NR H DTD 10/18/2010

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708123

REVISION NR F DTD 10/18/2010

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 7708153

REVISION NR E DTD 10/18/2010

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SC-X15113

REVISION NR B DTD 05/25/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387305

REVISION NR C DTD 10/24/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12347656

PAGE 20 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR K DTD 10/25/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12311330

REVISION NR M DTD 07/06/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 11654426

REVISION NR G DTD 10/22/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 SC-X15115

REVISION NR B DTD 11/20/2015

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12387118

REVISION NR J DTD 03/06/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12273148

REVISION NR AD DTD 04/23/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387303

REVISION NR E DTD 10/03/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12345259

REVISION NR A DTD 08/19/1992

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 19207 12387121

REVISION NR L DTD 03/25/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12569600

REVISION NR D DTD 05/14/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SC-X15114

REVISION NR E DTD 05/25/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12387271

REVISION NR D DTD 07/03/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 57K2935

REVISION NR F DTD 02/08/2024

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 SQAPCARCLTPHOS81361

PAGE 21 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346073

REVISION NR E DTD 11/08/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12344185

REVISION NR B DTD 05/18/2026

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12324505

REVISION NR AG DTD 05/26/2000

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE QAP 16236 SQAP012350450

REVISION NR DTD 09/11/2019

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12344185

REVISION NR DTD 07/01/2026

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12301788

REVISION NR B DTD 05/11/2021

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12311332

REVISION NR R DTD 06/02/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12311333

REVISION NR N DTD 07/20/2022

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12346066

REVISION NR B DTD 01/04/2023

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 SC-X15116

REVISION NR D DTD 10/26/2017

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19200 SC-X17741

REVISION NR E DTD 05/15/2020

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 01417 SC-X15110

REVISION NR K DTD 08/31/2020

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 5705498

REVISION NR K DTD 02/13/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12346450

PAGE 22 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

REVISION NR A DTD 05/09/2025

PART PIECE NUMBER:

TDP Rev E Gen 12

IAW REFERENCE DRAWING NR 19207 12344185

REVISION NR J DTD 12/23/2025

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7019021679 0001 EA 4.000

NSN/MATERIAL:2520012350450

DELIVERY (IN DAYS):0288

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION (MOP) SHALL

AFFORD ADEQUATE PROTECTION TO THE MOST CRITICAL

ITEM CONTAINED WITHIN THE KIT.

NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

PAGE 23 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

PR: 7019021679 PRLI: 0001 CONT’D

NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

ZZ - SPECIAL MARKING REQUIREMENTS:

SEGREGATION AND INDIVIDUAL IDENTIFICATION

REQUIREMENTS ARE LISTED IN MIL-STD-2073-1,

APPENDIX D, PARAGRAPH D.4.2.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

PACKAGE DESIGN SHALL ENSURE SAFE DELIVERY

TO ULTIMATE USER.

PARCEL POST ADDRESS:

SW3120

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

SW3120

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

US

Need Ship Date:05/04/2027 Original Required Delivery Date:12/31/2028

CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

PAGE 24 OF 34 PAGES

SPE7L1-27-T-4295

SECTION B

PR: PRLI: CONT’D

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000053

DELIVERY (IN DAYS):0090

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 25 OF 34 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 26 OF 34 PAGES

SPE7L1-27-T-4295

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and…