SPE7L127T1765.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE7L1-27-T-1765

2. DATE ISSUED

2026 OCT 20

3. REQUISITION/PURCHASE REQUEST NO.

7017869452

RATING

DO-C9

DLA WEAPONS SUPPORT

LAND SUPPLY CHAIN

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Name: Deborah Ferrin Buyer Code:PLCL3Q2 Tel: (614 693-1652 Email: Deborah.Ferrin@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 OCT 30

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 25

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 25 PAGES

SPE7L1-27-T-1765

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

THE MANUFACTURERS QUALITY MANAGEMENT SYSTEM MUST COMPLY WITH SAE AS9100

OR OTHER EQUIVALENT. IF QUOTING ‘OTHER EQUIVALENT’ SPECIFY WHAT ‘OTHER

EQUIVALENT’ STANDARD APPLIES. FOR DEALERS AND DISTRIBUTORS, WHEN AS9120

PAGE 3 OF 25 PAGES

SPE7L1-27-T-1765

SECTION A

REQUIREMENT APPEARS IN THE ITEM DESCRIPTION OF THE SOLICITATION, SELECT

‘OTHER EQUIVALENT' AND PROVIDE DETAILS OF CURRENT DEALER/DISTRIBUTOR

CERTIFICATION AND/OR ACCREDITATION.

Fast Pay does not apply to this solicitation

Procurement Note E04: Production Lot Testing – Government (MAY 2020)

(1) The purpose of production lot testing (PLT) is to validate quality conformance of products. PLT is to be completed on the production lot(s) after First Article approval, when a first article is required.

The contractor shall price the PLT CLIN to cover the cost of the approved samples that are consumed, destroyed or otherwise rendered unusable during testing.

(2) The contractor shall provide written notice to the contracting officer and the QAR at least fourteen (14) calendar days (or as otherwise specified in the contract) prior to the date when the contractor will present the production lot to the QAR for selection of PLT samples.

(3) The QAR will select 3 samples, at random from the production lot(s) produced. If the quantity stated in the previous sentence equals "ZZ", the contractor should use the appropriate sample size identified within the Technical Data Package or applicable Sample Plan provided by the Government. The contractor will seek approval of the sample size with the QAR.

(4) The contractor shall ship the PLT samples by traceable means to:

PTC MECHANICAL EAST

SL0702

PTC MECHANICAL EAST

DSCC-TM

ATTN: JEFFREY FLEEGER

BLDG 9, SECTION 2

3990 E. BROAD STREET

COLUMBUS

OH

43218-3990

Shipment shall be marked “Production lot samples – do not post to stock”, contract and lot number. A copy of the DD250/IRAPT Receiving Report shall be placed on the exterior of the shipping container in accordance with MIL STD 129. Include the following interior documentation: DD Form 1222 and DD250/IRAPT receiving report signed by the QAR, copy of contract/order, copies of test reports showing actual results and tolerances specified in the technical data package, material and process certifications, process operations and inspection method sheets, copies of drawings used to manufacture the PLT sample (proper marking to assert proprietary or other rights to restrict public disclosure is the contractor’s responsibility), documents required under contract deliverables requirements list, a prepaid shipping label or

PAGE 4 OF 25 PAGES

SPE7L1-27-T-1765

SECTION A

document with the information required to return the PLT samples to the contractor at no cost to the Government.

(5) At time of shipment, copies of the signed DD Form 1222, DD250/IRAPT Receiving Report, transportation tracking information and information for return of the PLT samples shall be provided to the contracting officer. The Government testing time will be 90 test plus 45 evaluation calendar days for the test results to be provided to the contractor.

(6) If a PLT sample fails, the entire production lot quantity produced fails. The contractor shall propose corrective action, if appropriate.

(7) PLT samples will be returned to the contractor with a copy of the test report, at contractor expense.

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, PAGE 5 OF 25 PAGES

SPE7L1-27-T-1765

SECTION A

THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

PAGE 6 OF 25 PAGES

SPE7L1-27-T-1765

SECTION A

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

PAGE 7 OF 25 PAGES

SECTION A

Procurement History for NSN/FSC:008778210/1095

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

21856 SPE7L126P8985P00002 45.000 923.00000 20260721 N

21856 SPE7L126P7962P00001 378.000 920.00000 20260617 N

32067 SPE7L126P5487P00002 366.000 874.00000 20260330 N

32067 SPE7L126P3154P00002 90.000 952.00000 20260112 N

32067 SPE7L126P3147P00001 135.000 940.00000 20260112 N

21856 SPE7L318P0312P00002 45.000 1204.00000 20171013 N

21856 SPE7L417P2295P00002 45.000 1204.00000 20170825 N

21856 SPE7L317P7335P00002 45.000 1204.00000 20170814 N

0KB09 SPE7L415M3031P00002 72.000 785.00000 20150709 N

0KB09 SPE7L315M3800P00002 120.000 785.00000 20150320 N

0KB09 SPE7L415M1503P00003 155.000 785.00000 20150225 N

45TU4 SPE7L415M0181P00004 7.000 1579.86000 20141021 N

8X044 SPM40006G0005YM73 174.000 422.04000 20080611 N

4SA89 SPM7A608M0083P00003 171.000 84.76000 20071029 N

8X044 SP074004M8250 65.000 240.00000 20031231 N

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 8 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

PR: 7017869452

NSN/MATERIAL:1095008778210

ITEM DESCRIPTION

HARNESS ASSEMBLY,ROCKET FIRING

HARNESS ASSEMBLY, ROCKET FIRING:

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

RD002, COVERED DEFENSE INFORMATION APPLIES

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State

PAGE 9 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers

RT001: MEASURING AND TEST EQUIPMENT

THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT

CLASS 3 THREADS APPLY TO THIS NSN.

"VENDOR ITEM CONTROL DRAWING"

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

THIS ITEM CONTAINS TECHNICAL DATA THAT IS NOT RELEASABLE TO FOREIGN

NATIONALS. TO ACCESS THE RESTRICTED TECHNICAL DATA VENDORS ARE REQUIRED

TO COMPLETE AND RETURN THE FORM LOCATED IN THE "FOREIGN SECURE" FOLDER

AVAILABLE AT https://tdmt.dla.mil/TDMT/Client

If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract.

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI).

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

PAGE 10 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

_______________EXCEPTION DATA____________________

C. PRODUCTION LOT TEST AT GOVERNMENT FACILITY SHALL CONSIST OF THE

FOLLOWING INSPECTIONS:

1. VISUAL INSPECTION (WORKMANSHIP, PACKAGING, ETC.) (ALL SAMPLES).

2. DIMENSIONAL INSPECTION OF FOLLOWING DIMENSIONS (ALL SAMPLES):

A. .843 -.858 DIAMETER OF DRAWING 291AS110

B. 6.62 +/- .06 LENGTH OF DRAWING 291AS110

C. 5.75 +/- .12 LENGTH OF DRAWING 291AS110

D. 2.25 +/- .50 LENGTH OF DRAWING 291AS110

E. 2.124 MAX LENGTH OF DRAWING 291AS111

F. 1.982 MAX LENGTH OF DRAWING 291AS103

G. 7/8 - 20 UNEF -3B THREAD OF DRAWING 291AS103 (SHOWN AS REF DIMENSION)

3. ELECTRICAL TEST OF NOTE 10 OF DRAWING 291AS110 (ALL SAMPLES).

4. WIRE ROPE / CRIMP JOINT ASSEMBLED PER NOTE 7 OF DRAWING 291AS110

SHALL BE PULL-TESTED (ONE SAMPLE - DESTRUCTIVE). WIRE ROPE SHALL NOT

BREAK NOR SLIP WITHIN THE SLEEVE WHEN TESTED USING PULL FORCE OF 200

LBS, +10, - 0 LBS.

5. MATERIAL VERIFICATION OF WASHER CLIP PER MATERIAL BLOCK REQUIREMENT

OF DRAWING 291AS112 USING X-RAY SPECTROSCOPY OR SIMILAR METHOD (ONE

SAMPLE - DESTRUCTIVE). TEST MUST BE PERFORMED ON BARE METAL WHICH WILL

NECESSITATE REMOVAL OF PAINT AND ANODIZE LAYER.

D. PULL TEST AND MATERIAL VERIFICATION TO BE PERFORMED ON THE SAME

SAMPLE. REMAINING PRODUCTION LOT TESTING SAMPLE(S) NOT SUBJECTED TO

DESTRUCTIVE TESTING MAY BE RETURNED TO THE VENDOR TO BE INCLUDED AS PART

OF THE DELIVERABLE PRODUCTION QUANTITY.

_________________END OF EXCEPTION DATA_____________________

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI)

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE)<(>,<)>

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

A CONTRACT DATA REQUIREMENTS LIST (CDRL), DD FORM

1423, IS REQUIRED FOR THE PROCUREMENT OF THIS

ITEM.

PRODUCTION LOT TESTING IS REQUIRED FOR THIS CONTRACT

IN ACCORDANCE WITH LATEST REVISION OF 291AS110QAP

(UNLESS WAIVED BY THE PROCUREMENT ACTIVITY).

PRODUCTION LOT TEST LOCATION:

DoDAAC SL0702 Defense Supply Center Columbus Mechanical Product Test Center - DLA TM 3990 East Broad Street, Bldg 17-3

PAGE 11 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

Columbus, Ohio 43218-3990

MARK FOR: PRODUCT TEST CENTER, BLDG 9-1

Attn: MS JONELLE LYONS

AFTER CONTRACT AWARD, THE CONTRACTOR SHALL DELIVER

SAMPLES FOR PRODUCTION LOT TESTING. THREE (3) PRODUCTION

LOT TEST SAMPLES SHALL BE RANDOMLY SELECTED BY THE

COGNIZANT ACO/QAR FROM EACH PRODUCTION LOT. THE ENTIRE

PRODUCTION LOT SHALL BE PRESENTED TO THE ACO/QAR AT ONE

TIME FOR SELECTION OF SAMPLES.

DESTRUCTIVE TESTS TO BE PERFORMED ON ONE (1) SAMPLE.

REMAINING PRODUCTION LOT TESTING SAMPLE(S) NOT SUBJECTED

TO DESTRUCTIVE TESTING MAY BE RETURNED TO THE VENDOR TO

BE INCLUDED AS PART OF THE DELIVERABLE PRODUCTION QUANTITY.

DESTRUCTIVE TEST LOCATION:

Address:

Defense Supply Center Columbus Mechanical Product Test Center - DLA TM 3990 East Broad Street, Bldg 17-3 Columbus, Ohio 43218-3990 Mark for: Product Test Center, Bldg 9-1 Attn: Ms. Jonelle Lyons

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY

IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION

OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO

THE CONTRACTING OFFICER FOR INCLUSION IN THE

AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST

BE APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

IF AQLS ARE LISTED IN THE SPECIFICATION(S)

OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE

AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE

NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS

CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS

ON ZERO DEFECTS AND REJECTS ON ONE OR MORE

DEFECT(S).

CONTRACTOR/MANUFACTURER IS REQUIRED TO

ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT

MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994<(>,<)>

AMERICAN NATIONAL STANDARD FOR CALIBRATION -

CALIBRATION LABORATORIES AND MEASURING AND TEST

EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1<(>,<)>

QUALITY ASSURANCE REQUIREMENTS FOR MEASURING

EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION

SYSTEM FOR MEASURING EQUIPMENT.

WHEN FIRST ARTICLE IS REQUIRED IN THE

CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER

SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS

"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO

PROVIDE THE TESTING FACILITY WRITTEN

NOTIFICATION OF WHEN THE FIRST ARTICLES

EXHIBITS WILL BE SHIPPED 10 CALENDAR DAYS

BEFORE THE SHIP DATE.

WHEN PRODUCTION LOT TESTING IS REQUIRED IN THE

CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER

SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS

"PLT SAMPLES". THE CONTRACTOR SHALL ALSO

PROVIDE THE TESTING FACILITY WRITTEN

NOTIFICATION OF WHEN THE PLT EXHIBITS

PAGE 12 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

WILL BE SHIPPED 10 CALENDAR DAYS BEFORE THE

SHIP DATE.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

CRITICAL APPLICATION ITEM

CENTROID, INC. 21856 P/N 291AS110

MARVIN ENGINEERING CO, INC 32067 P/N 291AS110

V2X MODERNIZATION AND SUSTAINMENT LLC 072E5 P/N 291AS110

GRYPHON M&T, LLC 0KB09 P/N 291AS110

DERCO AEROSPACE, INC. 8X044 P/N 291AS110

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS103

REVISION NR B DTD 11/29/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS110

REVISION NR F DTD 11/29/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS114

REVISION NR D DTD 11/29/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS111

REVISION NR C DTD 11/29/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS286

REVISION NR L DTD 06/12/2013

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS112

REVISION NR E DTD 11/29/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE QAP 30003 CDRL-008778210

REVISION NR DTD 09/27/2012

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE QAP 30003 3972AS150

REVISION NR B DTD 07/29/2014

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 30003 291AS110QAP

REVISION NR A DTD 04/26/2016

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE UNK QPL-22750-6 NOT 1

REVISION NR 6 DTD 09/27/2007

PART PIECE NUMBER:

PAGE 13 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

TDP Rev A Gen 1

IAW REFERENCE UNK QPL-23377-19 NOT 1

REVISION NR 19 DTD 05/12/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE UNK QPL-24041-22 NOT 1

REVISION NR 22 DTD 07/10/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE UNK QPL-83420-15 NOT 1

REVISION NR 15 DTD 10/29/2009

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7017869452 0001 EA 230.000

NSN/MATERIAL:1095008778210

DELIVERY (IN DAYS):0509

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:E7 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:100

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ZZ - SPECIAL MARKING REQUIREMENTS:

EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,

CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE

CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping

PAGE 14 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

PR: 7017869452 PRLI: 0001 CONT’D

containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Need Ship Date:11/09/2027 Original Required Delivery Date:08/12/2026

PRODUCTION LOT TESTING - GOVERNMENT TESTING REQUIRED (REFER TO

PROCUREMENT NOTE E04 FOR ADDITIONAL INFORMATION)

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0002 0000000000 EA 1.000

NSN/MATERIAL:S00000061

DELIVERY (IN DAYS):0374

PAGE 15 OF 25 PAGES

SPE7L1-27-T-1765

SECTION B

PR: PRLI: CONT’D

THIS LINE ITEM SIGNIFIES THE PRODUCTION LOT TEST REQUIREMENT (PLT).

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 25 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 25 PAGES

SPE7L1-27-T-1765

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 25 PAGES

SPE7L1-27-T-1765

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if applicable

Ship From Code See Resulting Award if applicable

Mark For Code See Resulting Award if applicable

Service Approver (DoDAAC)

See Resulting Award if applicable

Service Acceptor (DoDAAC)

See Resulting Award if applicable

Accept at Other DoDAAC See Resulting Award if applicable

LPO DoDAAC See Resulting Award if applicable

DCAA Auditor DoDAAC See Resulting Award if applicable

Other DoDAAC(s) See Resulting Award if applicable

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Contact the local contract administrator found in block 6 of the DD 1155 (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7999 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (DEVIATION 2026-O0015) (FEB 2026)

(DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 25 PAGES

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) (DFARS)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA—BASIC (OCT 2024) (DFARS)

(a) Definitions. As used in this clause -- "Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

"U.S.-flag vessel" means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116.

(b) If the transportation of supplies by sea is anticipated under this contract, the Contractor shall --

(1) Notify the Contracting Officer and Maritime Administration (MARAD) at Cargo.Marad@dot.gov --

(i) Within 3 business days after contract award; or

(ii) Immediately prior to the shipment departure date necessary to meet delivery schedules, whichever is earlier; and

(2) Include in the notification --

(i) A statement of the Contractor's intent to transport supplies by sea;

(ii) The contract number; and

(iii) The task-order or delivery-order number, when applicable.

(c)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that -- (1)The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b. destination shipment);

(2)Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or (3)Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(d) The Contractor and its subcontractors may request, via the Contracting Officer, a waiver of the requirement to use a U.S.-flag vessel, or identification of any available U.S.-flag vessels, if the Contractor or a subcontractor sufficiently explains that --

(1) U.S.-flag vessels are not available at a fair and reasonable rate for commercial vessels of the United States; or

(2) U.S.-flag vessels are otherwise not available.

(e) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, however, if a DoD waiver is not approved prior to the shipper's sailing date, this will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date(s) and required delivery date(s);

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of current, diligent efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of quotes will suffice for this purpose. Copies of telephone notes, emails, and other relevant communications will otherwise be considered for this purpose.

(f) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and MARAD at Cargo.Marad@dot.gov, Attention: Military Team, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of the carrier.

(g) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief --https://www.ecfr.gov/current/title-33/section-2.24 https://www.govinfo.gov/link/uscode/46/116 mailto:Cargo.Marad@dot.gov mailto:Cargo.Marad@dot.gov

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 25 PAGES

SPE7L1-27-T-1765

SECTION I - CONTRACT CLAUSES (CONTINUED)

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had received a prior-approved waiver for U.S.-flag vessels for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of DoD. The Contractor shall describe these shipments in the following format:

ITEM DESCRIPTION CONTRACT LINE ITEMS QUANTITY

TOTAL

(h) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.

(i) If the Contractor did not anticipate transporting any supplies by sea at the time of contract award and, therefore, did not provide the notification required by paragraph (b) of this clause, but prior to shipment of supplies, the Contractor learns that supplies will be transported by sea, the Contractor shall --

(1) Provide the notification required by paragraph (b) of this clause to the Contracting Officer and MARAD as soon as it is known that supplies will be transported by sea; and

(2) Comply with all the terms and conditions of this clause.

(j) Subcontracts. In the award of subcontracts, for the types of supplies described in paragraph (c)(2) of this clause, including subcontracts for commercial products, the Contractor shall flow down the requirements of this clause as follows:

(1) The Contractor shall insert the substance of this clause, including this paragraph (j), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

(2) The Contractor shall insert the substance of paragraphs (a) through (f) of this clause, and this paragraph (j), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

252.247-7025 REFLAGGING OR REPAIR WORK (OCT 2024) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)

52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS -- SIMPLIFIED ACQUISITIONS (NONCOMMERCIAL) (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.216-1 TYPE OF CONTRACT (DEVIATION 2026-O0038) (FEB 2026) (FAR)

The Government contemplates award of a ______________ [Contracting Officer insert specific type of contract] contract resulting from this solicitation.

52.216-1 ALT I TYPE OF CONTRACT, ALT I (DEVIATION 2026-O0038) (FEB 2026) (FAR)

52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (DEVIATION 2026-O0038) (FEB 2026) (FAR) Insert the clause at 52.219-28, Postaward Small Business Program Rerepresentation, in solicitations and contracts exceeding the micro-purchase threshold when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied this part in accordance with 19.000(b)(1)(ii).

(B) Use the clause with its Alternate I in solicitations and the resulting multiple-award contracts with more than one NAICS code. This is authorized for solicitations issued after October 1, 2028 (see 19.103(b)(2)).

As prescribed in 19.101(a)(2)(iii)(A), insert the following clause:

(a) Definitions. As used in this clause -- Long-term contract means a contract of more than five years in duration, including options.