SPE7L127Q0226.pdf
PDF 54 KB Posted
- Attached to
- RING, OBTURATOR AND 1 MORE ITEM
- Solicitation number
- SPE7L127Q0226
About this file
This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Weapons Support Land Supply Chain for the procurement of obturator rings (NSN 1025-01-569-3629). The solicitation was issued on November 20, 2026, with quotations due by December 1, 2026. The RFQ is not a small business set-aside and is being issued under Special Emergency Procurement Authority (SEPA) with a threshold up to $1,000,000 for acquisitions awarded and performed within the US.
The requirement consists of two line items: 46 units of obturator rings at firm fixed price with a delivery date of 492 days after order (ADO), and one Contractor First Article Test (CFAT) sample at firm fixed price with a delivery date of 90 days ADO. The total delivery timeline is 627 days from date of order, accounting for 90 days for CFAT submission, 45 days for government review, and 492 days for production of 46 units. This is a critical gun part item requiring CMMC Level 2 certification, inspection at origin, acceptance at origin, and FOB origin shipping to DLA Distribution Barstow in California. The item is export-controlled under ITAR/EAR and subject to source control drawing requirements with approval limited to specified manufacturers. Product verification testing may be invoked, and a shelf-life requirement of 84 months (non-extendable) applies. Quotations should be submitted to Buyer Samantha Dearden at DLA Weapons Support in Columbus, Ohio, via WAWF for payment processing.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE7L1-27-Q-0226
1. REQUEST NO.
2026 NOV 20
2. DATE ISSUED
7019020882
3. REQUISITION/PURCHASE REQUEST NO.
DO-C9
RATING
DLA WEAPONS SUPPORT
LAND SUPPLY CHAIN
PO BOX 3990
COLUMBUS OH 43218-3990
USA
Buyer: SAMANTHA DEARDEN PLCL70J Tel: 445-737-1638 Email: SAMANTHA.DEARDEN@DLA.MIL
SEE SCHEDULE
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 DEC 01
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 10 PAGES
SPE7L1-27-Q-0226
This solicitation is being issued under SEPA Authority.
SPECIAL EMERGENCY PROCURMENT AUTHORITY (SEPA) FAR 18.203, DFARS 218.203, & DAG 13.003 (B) Special Emergency Procurement Authority (a)(2) SAT is up to $1,000,000 for acquisitions awarded and performed or purchases to be made within the US; ($1.5 million for acquisitions awarded and performed or purchases to be made outside the US). FAR 2.101.
Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).
THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE REVISION OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUSITIONS IN EFFECT ON THE SOLICITATION ISSUE DATE. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT: http:/www.dla.mil./ HQ/Acqusition/Offers/eProcurement.aspx
DLAD Procurement Notes are incorporated by reference, with the same force and effect as if they were in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/ eProcurement.aspx and via 'References' on the DIBBS homepage.
NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (339991) applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.
Contractor First Article Testing Required
The quantity of “1 EA” depicted on the FAT line item signifies the test requirement. The actual number of unit required as well as the location to ship the FAT report to, is found in FAR clause 52.209-3.
Instructions for contractor entries into Wide Area Workflow (WAWF) for Contractor First Article Test Additive Line Item:
The contractor shall code the receiving report for the FAT Additive Line Item in WAWF as follows:
Enter “1 EA” for the FAT quantity and the unit of issue.”
Inspection at Origin (Source) – Enter the DCMA office DoDAAC listed on Page 1 of the order.
Acceptance at Destination – Enter DoDAAC SPE7L1 in the Acceptor Field.
Ship To Code – Enter the DoDAAC of the test facility listed in FAR clause 52.209-4, or if no DoDAAC is listed in 52.209-4, use DoDAAC FD2060.
If no DoDAAC is available for the designated test facility, the contractor will be unable to process a receiving report in WAWF. The contractor is instructed to process a manual receiving report.
All FAT reports should be submitted to:
DLA LAND – FLSEB
ATTN: FAT Monitor P.O. Box 3990 Columbus, OH 43218-3990 Or email: land.fat.monitor@dla.mil
Do not submit FAT reports to any other address listed with the FAT CLIN or appearing within a FAT clause.
THIS MATERIAL HAS A CONTRACTOR FIRST ARTICLE TEST (CFAT) REQUIREMENT.
2 UNITS SUBMITTED WITHIN 90 CALENDAR DAYS, GOV'T REVIEW 45 DAYS
DELIVERY CALCULATIONS FOLLOW:
90 DAYS FOR CFAT
45 DAYS GOVERNMENT REVIEW
492 DAYS FOR MATERIAL QUANTITY OF 46 UNITS.
TOTAL DELIVERY ON THIS AWARD IS 627 DAYS FROM DATE OF ORDER
FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions DFARS 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism
PAGE 3 OF 10 PAGES
SPE7L1-27-Q-0226
SECTION B
SUPPLIES/SERVICES: 1025-01-569-3629
ITEM DESCRIPTION:
RING, OBTURATOR.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/
To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SOURCE CONTROL DRAWING
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
PAGE 4 OF 10 PAGES
SPE7L1-27-Q-0226
SECTION B
SUPPLY/SERVICE: 1025-01-569-3629 CONT'D
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST CONFORM TO SOURCE CONTROL DRAWING. BY
SUBMITTING AN OFFER, THE OFFEROR AGREES TO
PROVIDE SOURCE CONTROLLED COMPONENTS FROM
SOURCES APPROVED ON THE APPLICABLE SOURCE
CONTROL DRAWING."
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RT001: MEASURING AND TEST EQUIPMENT
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.
(End of TQ Requirement)
WHEN FIRST ARTICLE IS REQUIRED IN THE
CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER
SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS
"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO
PROVIDE THE TESTING FACILITY WRITTEN
NOTIFICATION OF WHEN THE FIRST ARTICLES
EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE
SHIP DATE.
"REFERENCE MATERIAL-INCLUDES HANDBOOKS,
MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES,
BOOKS, ETC."
,,QAP: 11581020
_______________EXCEPTION DATA____________________
"SOURCE CONTROL TOP DRAWING WITH ONLY ONE SOURCE. PROCURE SOLE SOURCE
IAW THE AMSTA 525 FORM."
PDD11581020
CHANGE STEP 3 FROM: CLOSURE: ASTM D1974 SEALING METOD B
TO: CLOSURE: ASTM D1974/D1974M SEALING METOD B
ADD To specifications NCSL Z540.3
______________END OF EXCEPTIONS__________________
PAGE 5 OF 10 PAGES
SPE7L1-27-Q-0226
SUPPLY/SERVICE: 1025-01-569-3629 CONT'D
THE ITEM BEING PROCURED IS A CRITICAL GUN PART
ITEM WITH UNIQUE REQUIREMENTS.
CONTRACTOR FAT APPLIES.
AFTER RECEIPT OF QUOTES, OFFERORS MAY BE
CONTACTED TO PRICE THE FAT REQUIREMENT.
PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA
QAR AT THE ACTUAL MANUFACTURER'S FACILITY
IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION
OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO
THE CONTRACTING OFFICER FOR INCLUSION IN THE
AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST
BE APPROVED BY THE PCO VIA FORMAL CONTRACT
MODIFICATION.
PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE
WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE
REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE
INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE
CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING
TESTING.
PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF
EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.
FIVE (5) PVT SAMPLES, UNLESS OTHERWISE
SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT
IN FOR TESTING.
CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.
RS025: Shelf-life requirement RS001 for a TYPE I (CODE T) item with a shelf life of 84 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
US ARMY BENET LABORATORIES 1NUW7 P/N 11581020
TDP Rev A Gen 1
IAW BASIC DRAWING NR 11581020
REVISION NR B DTD 07/08/2013
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE QAP 1NUW7 QAP-APPX-BL
REVISION NR DTD 07/31/2001
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE DRAWING NR 19206 12521199
REVISION NR A DTD 05/28/1993
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE DRAWING NR 11581020
REVISION NR DTD 01/17/2014
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE QAP 11581020
REVISION NR B DTD 07/08/2013
PART PIECE NUMBER:
TDP Rev A Gen 1
IAW REFERENCE DRAWING NR 19200 11581020
REVISION NR DTD 01/05/2022
PART PIECE NUMBER:
PAGE 6 OF 10 PAGES
SPE7L1-27-Q-0226
SUPPLY/SERVICE: 1025-01-569-3629 CONT'D
TDP Rev A Gen 1
IAW REFERENCE DRAWING NR 1NUW7 11581020
REVISION NR B DTD 07/08/2013
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 1025-01-569-3629 46.000 EA $ ________________ $ ________________
RING,OBTURATOR
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 492 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL
PACKAGING INSTRUCTION SPI AM11581020 DATED 17/JAN/2014
SPECIAL MARKING CODE 32 FOR TYPE 1 SHELF-LIFE 7 YRS APPLIES.
ITEM IS EXPORT CONTROLLED. MIL-STD-2073-1D SPECIAL
MARKINGS CODE 40 APPLIES.
PARCEL POST ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
BARSTOW CA 92311-5014
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
PAGE 7 OF 10 PAGES
SPE7L1-27-Q-0226
SECTION B
SUPPLY/SERVICE: 1025-01-569-3629 CONT'D
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
BARSTOW CA 92311-5014
US
Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0002 0001 - S00000053 1.000 EA $ ________________ $ ________________
PRICING TERMS: Firm Fixed Price
FOB: DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPECIAL MARKING CODE 32 FOR TYPE 1 SHELF-LIFE 7 YRS APPLIES.
ITEM IS EXPORT CONTROLLED. MIL-STD-2073-1D SPECIAL
MARKINGS CODE 40 APPLIES.
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPECIAL MARKING CODE 32 FOR TYPE 1 SHELF-LIFE 7 YRS APPLIES.
ITEM IS EXPORT CONTROLLED. MIL-STD-2073-1D SPECIAL
MARKINGS CODE 40 APPLIES.
PAGE 8 OF 10 PAGES
SPE7L1-27-Q-0226
SUPPLY/SERVICE: 0001-S00000053 CONT'D
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7019020882 0001 N/A N/A N/A 05/22/2028
0002 7019020882 0002 N/A N/A N/A 05/22/2028
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 10 PAGES
SPE7L1-27-Q-0226
SECTION G - CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award)
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award)
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 10 PAGES
SPE7L1-27-Q-0226
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
See administer listed on page 1
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of Clause)
SECTION I - CONTRACT CLAUSES
52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS
52.219-31 NOTICE OF SMALL BUSINESS RESERVE (MAR 2020) FAR
File details come from the government source that posted it. Updated .