SPE7L127Q0194.pdf
PDF 64 KB Posted
- Attached to
- LINKAGE ASSEMBLY AND 2 MORE ITEMS
- Solicitation number
- SPE7L127Q0194
About this file
This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Weapons Support Land Supply Chain for procurement of a Linkage Assembly (NSN 1095-01-452-5826). The solicitation was issued on November 13, 2026, with a quotation deadline of November 23, 2026. The contract is being issued under Special Emergency Procurement Authority (SEPA) with a saturation limit of $1,000,000 for acquisitions within the U.S. The issuing office is located in Columbus, Ohio, with buyer Deborah Ferrin as the primary contact. This is not a small business set-aside.
The procurement requires 90 units of the linkage assembly with a delivery date of 999 days after order. The item is classified as a Critical Safety Item (CSI) with Navy identification and is subject to heightened quality assurance surveillance. Government First Article Testing (GFAT) of three units is required, with submission within 180 calendar days and government review within 135 days. Production Lot Testing (PLT) of two units is required 690 days after FAT review approval. Total delivery schedule is 1,110 days from order date. The material has no shelf life requirement and does not permit Class I ozone-depleting chemicals. Inspection and acceptance occur at origin, with FOB origin shipping terms. The item is export-controlled under ITAR/EAR regulations and requires contractor DDTC registration. Quoters must include pricing for the 90-unit primary line item, the FAT test sample line item, and the PLT test sample line item. Payment will be processed through Wide Area Workflow (WAWF) per DFARS 252.232-7006.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE7L1-27-Q-0194
1. REQUEST NO.
2026 NOV 13
2. DATE ISSUED
7018831906
3. REQUISITION/PURCHASE REQUEST NO.
DO-C9
RATING
DLA WEAPONS SUPPORT
LAND SUPPLY CHAIN
PO BOX 3990
COLUMBUS OH 43218-3990
USA
Buyer: Deborah Ferrin PLCL3Q2 Tel: (614 693-1652 Email: Deborah.Ferrin@dla.mil
SEE SCHEDULE
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 NOV 23
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 13 PAGES
SPE7L1-27-Q-0194
THIS IS A CRITICAL SAFETY ITEM (CSI)
DEFINITION: PARTS FAILURE POTENTIAL CAN CAUSE LOSS OF LIFE and/or SERIOUS INJURY
This solicitation is being issued under SEPA Authority.
SPECIAL EMERGENCY PROCURMENT AUTHORITY (SEPA) FAR 18.203, DFARS 218.203, & DAG 13.003 (B) Special Emergency Procurement Authority (a)(2) SAT is up to $1,000,000 for acquisitions awarded and performed or purchases to be made within the US; ($1.5 million for acquisitions awarded and performed or purchases to be made outside the US). FAR 2.101.
Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s)."
“NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (332994) applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.”
PURCHASE ORDER CLAUSES ARE APPLICABLE AS INDICATED IN THE REVISION OF THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS IN EFFECT ON THE AWARD DATE. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
Government First Article Testing Required
The quantity of “1 EA” depicted on the FAT line item signifies the test requirement. The actual number of unit required as well as the location to ship the FAT report to, is found in FAR clause 52.209-4.
Instructions for contractor entries into Wide Area Workflow (WAWF) for Government First Article Test Additive Line Item:
The contractor shall code the receiving report for the FAT Additive Line Item in WAWF as follows:
Enter “1 EA” for the FAT quantity and the unit of issue.”
Inspection at Origin (Source) – Enter the DCMA office DoDAAC listed on Page 1 of the order.
Acceptance at Destination – Enter DoDAAC SPE7L1 in the Acceptor Field.
Ship To Code – Enter the DoDAAC of the test facility listed in FAR clause 52.209-4, or if no DoDAAC is listed in 52.209-4, use DoDAAC Q93808.
If no DoDAAC is available for the designated test facility, the contractor will be unable to process a receiving report in WAWF. The contractor is instructed to process a manual receiving report.
FIRST ARTICLE APPROVAL – GOVERNMENT TESTING REQUIRED
(FAR 52.209-4 AND ALT I)
THE CONTRACTOR SHALL DELIVER 2 UNIT(S) OF LOT/ITEM
1095 / 014525826 WITHIN 180 CALENDAR DAYS FROM THE DATE
OF THIS CONTRACT TO THE GOVERNMENT AT THE LOCATION
SPECIFIED BELOW FOR FIRST ARTICLE TESTS.
Q93808
DAYTON T. BROWN
1195 CHURCH STREET
BOHEMIA, NY 11716-5014
WITHIN 135 CALENDAR DAYS AFTER THE GOVERNMENT RECEIVES
THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY
THE CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL,
APPROVAL, OR DISAPPROVAL OF THE FIRST ARTICLE.
DISPOSITION OF FIRST ARTICLES:
Procurement Note E02: Supplemental First Article Exhibit Disposition - Government Maintained (MAY 2020)
The first article units will be held by the Government, either destroyed in testing or maintained as a manufacturing standard. The contractor will be required to produce/deliver the full quantity indicated on the
PAGE 3 OF 13 PAGES
SPE7L1-27-Q-0194
contract order, the first article units will not be part of the production quantity.
Do not submit FAT reports to any other address listed with the FAT CLIN or appearing within a FAT clause.
THIS MATERIAL HAS A GOVERNMENT FIRST ARTICLE TEST (GFAT) REQUIREMENT AND A PRODUCTION LOT TESTING (PLT) REQUIREMENT
FAT - 3 UNITS SUBMITTED WITHIN 180 CALENDAR DAYS, GOV'T REVIEW 135 DAYS
PLT – 2 UNITS SUBMITTED 690 DAYS AFTER FAT REVIEW, GOV’T REVIEW 135 DAYS
DELIVERY CALCULATIONS FOLLOW:
180 DAYS FOR GFAT
135 DAYS FOR FAT GOV’T REVIEW
600 DAYS FOR DELIVERY OF 2 UNITS FOR PLT TESTING
90 DAYS FOR PLT GOV’T TEST TIME
45 DAYS FOR PLT GOV’T EVALUATION TIME
60 DAYS FOR DELIVERY OF MATERIAL QUANTITY OF 90 UNITS
TOTAL DELIVERY ON THIS AWARD IS 1,110 DAYS FROM DATE OF ORDER
Procurement Note E04: Production Lot Testing – Government (MAY 2020)
(1) The purpose of production lot testing (PLT) is to validate quality conformance of products. PLT is to be completed on the production lot(s) after First Article approval, when a first article is required.
The contractor shall price the PLT CLIN to cover the cost of the approved samples that are consumed, destroyed or otherwise rendered unusable during testing.
(2) The contractor shall provide written notice to the contracting officer and the QAR at least fourteen (14) calendar days (or as otherwise specified in the contract) prior to the date when the contractor will present the production lot to the QAR for selection of PLT samples.
(3) The QAR will select 2 samples, at random from the production lot(s) produced. If the quantity stated in the previous sentence equals "ZZ", the contractor should use the appropriate sample size identified within the Technical Data Package or applicable Sample Plan provided by the Government. The contractor will seek approval of the sample size with the QAR.
(4) The contractor shall ship the PLT samples by traceable means to:
DAYTON T. BROWN
Q93808
DAYTON T. BROWN
1195 CHURCH STREET
BOHEMIA, NY 11716-5014
Shipment shall be marked “Production lot samples – do not post to stock”, contract and lot number. A copy of the DD250/IRAPT Receiving Report shall be placed on the exterior of the shipping container in accordance with MIL STD 129. Include the following interior documentation: DD Form 1222 and DD250/IRAPT receiving report signed by the QAR, copy of contract/order, copies of test reports showing actual results and tolerances specified in the technical data package, material and process certifications, process operations and inspection method sheets, copies of drawings used to manufacture the PLT sample (proper marking to assert proprietary or other rights to restrict public disclosure is the contractor’s responsibility), documents required under contract deliverables requirements list, a prepaid shipping label or document with the information required to return the PLT samples to the contractor at no cost to the Government.
(5) At time of shipment, copies of the signed DD Form 1222, DD250/IRAPT Receiving Report, transportation tracking information and information for return of the PLT samples shall be provided to the contracting officer. The Government testing time will be 104 test plus 164 evaluation calendar days for the test results to be provided to the contractor.
(6) If a PLT sample fails, the entire production lot quantity produced fails. The contractor shall propose corrective action, if appropriate.
PAGE 4 OF 13 PAGES
SPE7L1-27-Q-0194
(7) PLT samples will be returned to the contractor with a copy of the test report, at contractor expense.
L&M Proc Note 246-9061 PRODUCTION LOT TESTING - GOVERNMENT (JUN 2020)
UCF SECTION E
Insert in all awards when Government Production Lot Testing applies.
FILL-INS:
(a) Lab DoDAAC and Address (obtained in Award)
(b) Issuing Activity DoDAAC: SPE7L1
“UCF SECTION E WAWF Instructions for Test NSN/Material S00000061 CLIN:
Place the following information in WAWF as follows:
Inspection: Origin Ship To (Lab DoDAAC): _______ Ship To (Lab Address): _________ Acceptance: Destination (Issuing Activity DoDAAC): _______ FOB: Destination
FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions DFARS 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism
252.209-7010 Critical Safety Items.
As prescribed in 209.270-5, use the following clause:
CRITICAL SAFETY ITEMS (AUG 2011)
(a) Definitions.
“Aviation critical safety item” means a part, an assembly, installation equipment, launch equipment, recovery equipment, or support equipment for an aircraft or aviation weapon system if the part, assembly, or equipment contains a characteristic any failure, malfunction, or absence of which could cause—
(i) A catastrophic or critical failure resulting in the loss of, or serious damage to, the aircraft or weapon system;
(ii) An unacceptable risk of personal injury or loss of life; or
(iii) An uncommanded engine shutdown that jeopardizes safety.
“Design control activity” means—
(i) With respect to an aviation critical safety item, the systems command of a military department that is specifically responsible for ensuring the airworthiness of an aviation system or equipment, in which an aviation critical safety item is to be used; and
(ii) With respect to a ship critical safety item, the systems command of a military department that is specifically responsible for ensuring the seaworthiness of a ship or ship equipment, in which a ship critical safety item is to be used.
“Ship critical safety item” means any ship part, assembly, or support equipment containing a characteristic, the failure, malfunction, or absence of which could cause—
(i) A catastrophic or critical failure resulting in loss of, or serious damage to, the ship; or
(ii) An unacceptable risk of personal injury or loss of life.
(b) Identification of critical safety items. One or more of the items being procured under this contract is an aviation or ship critical safety item. The following items have been designated aviation critical safety items or ship critical safety items by the designated design control activity:
(Insert additional lines as necessary)
(c) Heightened quality assurance surveillance. Items designated in paragraph (b) of this clause are subject to heightened, risk-based surveillance by the designated quality assurance representative.
PAGE 5 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION B
SUPPLIES/SERVICES: 1095-01-452-5826
ITEM DESCRIPTION:
LINKAGE ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/
To be eligible for award, offerors and any sources of supply proposed
PAGE 6 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION B
SUPPLY/SERVICE: 1095-01-452-5826 CONT'D
for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
WHEN FIRST ARTICLE IS REQUIRED IN THE
CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER
SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS
"FIRST ARTICLE". THE CONTRACTOR SHALL ALSO
PROVIDE THE TESTING FACILITY WRITTEN
NOTIFICATION OF WHEN THE FIRST ARTICLES
EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE
SHIP DATE.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.
(End of TQ Requirement)
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;
(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract.
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI)
THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI)
ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
PAGE 7 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION B
SUPPLY/SERVICE: 1095-01-452-5826 CONT'D
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE)<(>,<)>
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.
_______________EXCEPTION DATA___________________
THE CONTRACTOR MUST IDENTIFY BY “THE" CONTRACT NUMBER THE CURRENT AMOUNT
OF STOCK LEFT BY “THE” CONTRACT NUMBER<(>,<)> “A” CONTRACT USED TO
CREATE THE STOCK, SO (STOCK ORDER #), DATE OF FIRST ARTICLE APPROVAL<(>
,<)> # OF PIECES ON SO #, QUANTITY OF PARTS LEFT IN STOCK
EXCEPTIONS – CONTRACTOR IS AUTHORIZED TO USE “A” CONTRACT TO
“STOCK/PREPRODUCTION OVERRUN” PARTS TO FULL FILL REQUIREMENTS OF A
PRODUCT LOT TESTING AND PARTS DO NOT NEED TO BE TRACEABLE TO A SPECIFIC
PART ONLY TO A HEAT LOT/BATCH NUMBER.
______________END OF EXCEPTIONS_________________
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS
EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799).
ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES
IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF
DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF
STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY
BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT
RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE
TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL
MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.
THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE
REQUIREMENTS.
A CONTRACT DATA REQUIREMENTS LIST (CDRL), DD FORM 1423, IS REQUIRED FOR
THE PROCUREMENT OF THIS ITEM.
GOVERNMENT FIRST ARTICLE TESTING AND GOVERNMENT PRODUCTION LOT TESTING
ARE REQUIRED FOR THIS CONTRACT IN ACCORDANCE WITH LATEST REVISION OF
549AS303QAP (UNLESS WAIVED BY THE PROCUREMENT ACTIVITY).
GOVERNMENT FIRST ARTICLE TEST: THREE (3) EXHIBITS ARE REQUIRED: ONE (1)
ASSEMBLED AND TWO (2) USSEMBLED.
FIRST ARTICLE TEST/ PRODUCTION LOT TEST LOCATION:
MS. DENISE SPEIZIO
DAYTON T. BROWN, INC.
1195 CHURCH ST.
BOHEMIA, NY 11716
FAT AND PLT EXHIBIT DUE DATES ARE BASELINES FOR SOLICITATION PURPOSES,
PRIOR TO NEGOTIATION.
PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA QAR AT THE ACTUAL
MANUFACTURER'S FACILITY IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION
OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE CONTRACTING OFFICER
FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE
APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION.
CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.
IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE
USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE
NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING
PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S).
CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A
CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994,
AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATORIES
AND MEASURING AND TEST EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1,
QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1,
METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT.
WHEN FIRST ARTICLE IS REQUIRED IN THE CONTRACT, THE CONTRACTOR SHALL
MARK THE OUTER SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS "FIRST
ARTICLE". THE CONTRACTOR SHALL ALSO PROVIDE THE TESTING FACILITY
WRITTEN NOTIFICATION OF WHEN THE FIRST ARTICLES EXHIBITS WILL BE SHIPPED
PAGE 8 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION B
SUPPLY/SERVICE: 1095-01-452-5826 CONT'D
10 CALENDAR DAYS BEFORE THE SHIP DATE.
WHEN PRODUCTION LOT TESTING IS REQUIRED IN THE CONTRACT, THE CONTRACTOR
SHALL MARK THE OUTER SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS "PLT
SAMPLES". THE CONTRACTOR SHALL ALSO PROVIDE THE TESTING FACILITY WRITTEN
NOTIFICATION OF WHEN THE PLT EXHIBITS WILL BE SHIPPED 10 CALENDAR DAYS
BEFORE THE SHIP DATE.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN
ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY
PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
MARVIN ENGINEERING CO, INC 32067 P/N 549AS303
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 201AS114
REVISION NR G DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 255AS154
REVISION NR U DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44A13
REVISION NR L DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44B38
REVISION NR T DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44A3
REVISION NR L DTD 08/22/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 252AS113
REVISION NR P DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44B37
REVISION NR T DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 252AS112
REVISION NR W DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44A6
REVISION NR L DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 549AS302
REVISION NR N DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 549AS111
REVISION NR N DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44C112
REVISION NR AC DTD 08/15/2022
PART PIECE NUMBER:
PAGE 9 OF 13 PAGES
SPE7L1-27-Q-0194
SUPPLY/SERVICE: 1095-01-452-5826 CONT'D
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 201AS103
REVISION NR C DTD 08/22/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE QAP 30003 3972AS150
REVISION NR B DTD 07/29/2014
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 549AS303
REVISION NR K DTD 09/16/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE DRAWING NR 30003 55A44B32
REVISION NR U DTD 08/15/2022
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE QAP 30003 549AS303
REVISION NR DTD 08/29/2014
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE QAP 16236 CDRL014525826
REVISION NR DTD 09/14/2020
PART PIECE NUMBER:
TDP Rev C Gen 6
IAW REFERENCE QAP 16236 SQAP014525826
REVISION NR A DTD 06/18/2026
PART PIECE NUMBER:
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 1095-01-452-5826 90.000 EA $ ________________ $ ________________
LINKAGE ASSEMBLY
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 999 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ITEM IS EXPORT CONTROLLED. MIL-STD-2073-1D SPECIAL
PAGE 10 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION B
SUPPLY/SERVICE: 1095-01-452-5826 CONT'D
MARKINGS CODE 40 APPLIES.
EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Government First Article Test Government First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-4 for the actual quantity required to be tested.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%
0002 0001 - S00000052 1.000 EA $ ________________ $ ________________
FOB: DELIVERY DATE: 600 DAYS ADO
PREP FOR DELIVERY:
Not Applicable
Production Lot Testing (Government)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%
0003 0001 - S00000061 1.000 EA $ ________________ $ ________________
INSPECTION POINT: ORIGIN
PAGE 11 OF 13 PAGES
SPE7L1-27-Q-0194
SUPPLY/SERVICE: 0001-S00000061 CONT'D
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 999 DAYS ADO
PREP FOR DELIVERY:
Not Applicable
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7018831906 0001 N/A N/A N/A 11/14/2029
0002 N/A N/A N/A N/A N/A N/A
0003 N/A N/A N/A N/A N/A N/A
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION G - CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award)
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award)
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 13 PAGES
SPE7L1-27-Q-0194
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
See administer listed on page 1
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of Clause)
SECTION I - CONTRACT CLAUSES
52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS
52.219-31 NOTICE OF SMALL BUSINESS RESERVE (MAR 2020) FAR
File details come from the government source that posted it. Updated .