REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE7L1-27-Q-0096

1. REQUEST NO.

2026 NOV 13

2. DATE ISSUED

7018683654

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA WEAPONS SUPPORT

LAND SUPPLY CHAIN

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Buyer: Deborah Ferrin PLCL3Q2 Tel: (614 693-1652 Email: Deborah.Ferrin@dla.mil

SEE SCHEDULE

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 23

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 43 PAGES

SPE7L1-27-Q-0096

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE REVISION OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS IN EFFECT ON THE SOLICITATION ISSUE DATE. ALL REVISIONS OF THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS CAN BE FOUND ON THE WEB AT: http://www.dla.mil/ HQ/Acquisition/Offers/eProcurement.aspx

“NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (332994) applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.”

THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS.

DUE TO THE DEMILITARIZATION REQUIREMENTS OF THIS ITEM SURPLUS MATERIAL WILL NOT BE ACCEPTED.

THIS SOLICITATION MAY RESULT IN A BILATERAL AWARD

A SECURITY PRE-AWARD SURVEY IS REQUIRED BEFORE CONSIDERATION FOR AWARD. GOVERNMENT FURNISHED EQUIPMENT (GFE) AND

GOVERNMENT FURNISHED MATERIAL (GFM) REQUIRED FOR THIS CONTRACT:

__________ GOVERNMENT FURNISHED EQUIPMENT AND MATERIAL __________

THIS ITEM REQUIRES GOVERNMENT FURNISHED EQUIPMENT (GFE) AND GOVERNMENT FURNISHED MATERIAL (GFM). SEE BELOW FOR SPECIAL

CONTRACT REQUIRMENTS.

A. EQUIPMENT AND MATERIAL REQUIRED FOR CONTRACTOR’S USE:

GFP:

NSN NOMENCLATURE QTY SRC COST

1005-01-549-5837 M240L, MACHINE GUN, 2 II $19,826.00

7.62MM

Government Furnished Property will be shipped from: B14 U.S. ARMY ARMAMENT AND CHEMICAL ACQUISITION AND LOGISTICS

ACTIVITY, ATTN: AMSTA-AC, ROCK ISLAND, IL 61299-6000

GFM:

DODIC NSN NOMENCLATURE QTY SRC HAZMAT

A129 1305-00-580-0131 CTG, 7.62MM HIGH 248 EACH IV AC 1.4S

PRESSURE TEST

M60 SNGL RND

A143 1305-00-892-2330 CTG, 7.62MM, NATO 15,512 EACH IV AC 1.4S

M80 BALL LNKD

FAT Requirement:

A143 1305-00-892-2330 CTG, 7.62MM, NATO 45,000 EACH IV AC 1.4S

M80 BALL LNKD

Government Furnished Material will be shipped from: HQ JOINT MUNITIONS COMMAND, ATTN: AMJM-RMF, ROCK ISLAND, IL 61299-5500.

*AMMO Quantities will include 10% and rounded up to unit pack, based upon 1 per barrel ADQ and/or LOT sample size testing requirements.

B. A SECURITY PREAWARD SURVEY IS REQUIRED FOR THESE ITEMS. DFARS, PART 252.223-7007, “SAFEGUARDING SENSITIVE CONVENTIONAL ARMS, AMMUNITION, AND EXPLOSIVES,” SHALL BE PART OF THE SOLICITATION/CONTRACT.

C. THIS CONTRACT INVOLVES HAZARDOUS MATERIAL DFARS 252.223-7002, SAFETY PRECAUTIONS FOR AMMUNITION AND EXPLOSIVES, DFARS 252.223-.3704. PGI 223.370-4(1)(iv), SAFETY PRECAUTIONS FOR AMMUNITION AND EXPLOSIVES – PREAWARD SURVEY, AND DFARS 252.223-370-4, PGI 223.370-4(1)(iii), DISPOSAL OF REMAINING GFM AMMUNITION AND EXPLOSIVES FOLLOWING CONTRACT COMPLETITION OR TERMINATION INSTRUCTIONS SHALL BE PART OF THE SOLICITATION/CONTRACT.

D.PLEASE SUBMIT REQUEST FOR GFM AUTHORIZATIONS TO DLA.LandandMaritime.GFPManager@DLA.MIL.

______ END OF GOVERNMENT FURNISHED EQUIPMENT AND MATERIAL ________

THIS MATERIAL HAS A CONTRACTOR FIRST ARTICLE TEST (CFAT) REQUIREMENT.

5 UNITS SUBMITTED WITHIN 90 CALENDAR DAYS, GOV'T REVIEW 45 DAYS

DELIVERY CALCULATIONS FOLLOW:

90 DAYS FOR CFAT

45 DAYS GOVERNMENT REVIEW

PAGE 3 OF 43 PAGES

SPE7L1-27-Q-0096

546 DAYS FOR MATERIAL QUANTITY OF 225 UNITS.

TOTAL DELIVERY ON THIS AWARD IS 681 DAYS FROM DATE OF ORDER

"EVALUATION FACTORS FOR AWARD

Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s)." Offerors are encouraged to submit price breaks information with theirquotes. Solicitation which are manually evaluated and awarded at increased quantities nay be awarded based on the price break information submitted with the offeror's original quotation.

PROC STO 245-9003 TRANSPORTATION COSTS OF GOVERNMENT FURNISHED PROPERTY (GFP) (SEPT 2015)

TRANSPORTATION COSTS OF GOVERNMENT FURNISHED PROPERTY (GFP)

(a) In accordance with FAR 52.245-1 and FAR 52.245-2, the Government will furnish at no cost to the Contractor the property specified below for the use in performance of the resulting contract:

1005-01-549-5837; M240L, MACHINE GUN, 7.62MM; QTY 2; UNIT PRICE: $19,826.00

1305-00-580-0131; CTG, 7.62MM HIGH PRESSURE TEST M60 SNGL RND; QTY 248; UNIT PRICE: N/A

1305-00-892-2330; CTG, 7.62MM, NATO, M80 BALL LNKD; QTY 15,512; UNIT PRICE: N/A

1305-00-892-2330; CTG, 7.62MM, NATO, M80 BALL LNKD; QTY 45,000; UNIT PRICE: N/A

(b) The Government will deliver government furnished property to the Contractor's plant in accordance with 52.247-55, F.O.B. Point for Delivery of Government-Furnished Property. Offerors shall indicate in the space below the name and address of the plant where the property will be utilized. In the absence of the delivery information, the Government will evaluate offer on the assumption that the property will be utilized at the location under the heading “Production Facilities,” or Block 15A of standard form (SF) 33 of the offer. Offeror to complete:

Plant: _______________________________________________ Street address: ________________________________________ City and state: ________________________________________

(c) In the evaluation of the offers, among the factors to be considered in determining the low offeror will be the cost of transporting Government-furnished property to the Contractor's plant. Land methods of transportation by regulated common carrier will be used to evaluate cost of transportation from the Government's place of shipment (cited below) to the offeror’s facility (paragraph b). This transportation cost will be added to the offered price to determine the overallcost to the Government. If the location from which the GFP will be shipped is not known at the time of issuance of the solicitation, the cost of transporting the GFP to the offeror’s facility will not be a factor in the evaluation of offers.

Government furnished materials will be shipped from: ______________________ Weight: _____________________________________ Cube: ______________________________________

(d) The delivery schedule contained in Section F is based on the assumption that delivery of the GFP will be made to the Contractor within 45 days after date of award, unless otherwise indicated.

(e) Contractor's receipt for GFP: The Government will furnish the Contractor with shipping documents detailing the information and the exact quantity of property furnished. Within five days after receipt of GFP the Contractor shall acknowledge receipt to the Government on shipping documents and return them to ______. The Government reserves the right to suspend further shipments of property until receipts for GFP have been properly prepared and received by the Government. Notwithstanding any other contract provision, delays by the Contractor caused by suspension of GFP shipments for failure to meet this provision shall not constitute an excusable delay within the terms of this contract.

(End of Text)

“UCF SECTION F GOVERNMENT-OWNED TOOLING Offers submitted on the basis of utilization of Government-owned tooling, as specified herein, must offer the total quantity of goods and services listed in the solicitation.

(a) Availability:

(1) Tooling/set(s) of tooling as listed in the attachment to this solicitation is available and may be inspected at:

(2) The Contractor will be responsible for repairs and replacements to the tooling/set(s), if any, and all such

PAGE 4 OF 43 PAGES

SPE7L1-27-Q-0096

repairs and replacements will be accomplished by the Contractor at his own expense.

(3) Such tooling will be furnished "as is" in accordance with FAR 52.245-1, Government Property, of this solicitation.

(b) Inspection of tooling: Offerors whose offer isbased on the use of the Government-owned tooling must assure that such tooling is suitable for their use. Any costs of transporting, installing, modifying, repairing, or otherwise making the tooling suitable for use shall be borne by the successful offeror. If a prospective offeror is interested in inspecting the Government-owned tooling, arrangements should be made by contacting the Contracting Officer who will coordinate with the appropriate special tooling coordinator. Contact shall be made at least ten (10) working days prior to the time of the inspection to be made at the location indicated in paragraph (a)(1) above.

(c) If the Contractor modifies, repairs, or otherwise makes the tooling suitable for use, then the Contractor is required to maintain that special tooling in accordance with sound industrial practice. This is understood to mean that the Contractor will furnish all repairs and replacements necessary to maintain the tooling/set(s) in a condition to produce specification items throughout the period of production.

PAGE 5 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLIES/SERVICES: 1005-01-564-6769

ITEM DESCRIPTION:

BARREL ASSEMBLY, SHORT, LIGHTWEIGHT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

RD002, COVERED DEFENSE INFORMATION APPLIES

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the

PAGE 6 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RQ036- Phosphate Coating Supplier Certification Requirements

RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers

RT001: MEASURING AND TEST EQUIPMENT

THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT

FULL AND OPEN COMPETITION APPLY

CLASS 3 THREADS APPLY TO THIS NSN.

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

"VENDOR ITEM CONTROL DRAWING"

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

A FN HERSTAL LICENSE AGREEMENT 06 RESTRICTED TECHNICAL DATA PACKAGE

EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION

CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN

THE "06 FABRIQUE NATIONALE HERSTAL M240, M240C" LICENSE AGREEMENT FOLDER

AVAILABLE AT https://tdmt.dla.mil/TDMT/Client

Government Furnished Property (GFP) Non-Interference Rent Free Tooling may be required to support procurement of this item. Non-Interference Rent Free Tooling accountable to the applicable DCMA, U.S. Military Service Facility, and/or DLA will be provided under Government Furnished Property (GFP), if required.

Please submit request for GFP authorizations to:

PAGE 7 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

DLA.LandandMaritime.GFPManager@dla.mil

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

ALL DRAWINGS: IN ORDER TO ENSURE CORRECT INTERPRETATION, SPECIFIC

REVISIONS OF SPECIFICATIONS CALLED-OUT IN WITHIN DRAWING NOTES APPLY.

DR 11825994, NOTE 3:

FROM: "AMS 2759"

TO: "SAE-AMS2759"

DR 11825998, NOTE 1F:

FROM: "MIL-S-11595"

TO: "MIL-B-11595"

DR 12597042, NOTE 4:

FROM: "DOD-P-16232"

TO: "MIL-DTL-16232"

DR 12976826, NOTE 2:

DELETE: "OR 9255"

DR 13013474, NOTE 9:

FROM: "ASTM E1444"

TO: "ASTM E1444/E1444M"

DR 13016091, NOTE 3:

FROM: "AMS 2759/1"

TO: "SAE-AMS2759/1"

DR 13016480, NOTE 2:

FROM: "ASTM B348"

TO: "ASTM B348/B348M"

DR 13016481, NOTE 2:

FROM: "FED-STD-595"

TO: "SAE-AMS-STD-595"

TDPL:

PRODUCT DRAWINGS AND ASSOCIATED LISTS:

DR 11825998: REMOVE "REF"

SPECIFICATIONS AND STANDARDS:

DELETE ADD REPLACE

DOD-P-16232 -- -- MIL-DTL-16232

MIL-DTL-13924 XX -- --

MIL-DTL-53072 XX -- --

MIL-PRF-3420 -- XX --

MIL-PRF-680 -- XX --

MIL-S-11595 -- -- MIL-B-11595

ASTM-A225/A225M -- XX --

ASTM-A370 -- XX --

ASTM-A681 -- XX --

ASTM-B348 -- -- ASTM B348/B348M

ASTM-B633 XX -- --

ASTM-D2510 XX -- --

ASTM-D3359 XX -- --

ASTM-E45 -- XX --

PAGE 8 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

ASTM-E112 -- XX --

ASTM-E1444 -- -- ASTM E1444/E1444M

ASTM-E350 -- XX --

ASTM-E415 -- XX --

ASTM-F519 XX -- --

FED-STD-595 -- -- SAE-AMS-STD-595

SAE-AMS-QQ-C-320 -- -- SAE-AMS2460

SAE-AMS-QQ-P-416 XX -- --

______________END OF EXCEPTIONS__________________

__________SPECIAL PACKAGING INSTRUCTIONS_________

PACKAGING DRAWINGS AND DOCUMENTS:

DR 7266299: REMOVE "REF"

ADD DR 13041260

______END OF SPECIAL PACKAGING INSTRUCTIONS______

_________SPECIAL GFE AND GFM REQUIREMENTS_________

THIS ITEM REQUIRES GOVERNMENT FURNISHED EQUIPMENT

(GFE) AND GOVERNMENT FURNISHED MATERIAL (GFM).

SEE BELOW FOR SPECIAL CONTRACT REQUIREMENTS:

EQUIPMENT REQUIRED FOR TESTING:

1.) QTY: 2 M240; 1005-01-549-5837; SRC: II

AMMO REQUIRED FOR TESTING:

1.) HIGH PRESSURE PROOF FIRING:

QTY: 1 PER BARREL M60 7.62MM; 1305-00-580-0131; DODIC: A129; SRC: IV

2.) ACCURACY REQUIREMENT TESTING:

QTY: 16 PER BARREL M80 7.62MM BALL CARTRIDGE; 1305-00-892-2330; DODIC:

A143; SRC: IV (3 ROUNDS FOR SIGHTING, 3 ROUNDS TO CONFIRM ACCURACY, AND

A 10 ROUND BURST) MULTIPLIED BY THE SAMPLING AMOUNT.

2.1) 32 BARRELS RANDOMLY SELECTED FROM EACH LOT (2000 UNNITS OR LESS)

3.) ENDURANCE TESTING:

QTY: 15,000 FOR 1 BARREL PER LOT M80 7.62MM BALL CARTRIDGE;

1305-00-892-2330; DODIC: A143; SRC: IV

3.1) 1 BARREL RANDOMLY SELECTED FROM EACH LOT (2000 UNITS OR LESS)

4.) FIRST ARTICLE:

QTY: 15,000 FOR 3 BARRELS PER FAT REQUIREMENT (45,000 TOTAL) M80 7.62MM

BALL CARTRIDGE; 1305-00-892-2330; DODIC: A143; SRC: IV

A SECURITY PREAWARD SURVEY IS REQUIRED FOR

THESE ITEMS. DFARS, PART 252.223-7007<(>,<)>

"SAFEGUARDING SENSITIVE CONVENTIONAL ARMS<(>,<)>

AMMUNITION, AND EXPLOSIVES," SHALL BE PART OF

THE SOLICITATION/CONTRACT.

THIS CONTRACT INVOLVES HAZARDOUS MATERIAL.

DFARS 252.223.7002, SAFETY PRECAUTIONS FOR

AMMUNITION AND EXPLOSIVES, DFARS 252.223.370-4<(>,<)>

PGI 223.370-4(1)(IV), SAFETY PRECAUTIONS FOR

AMMUNITION AND EXPLOSIVES - PREAWARD SURVEY, AND

DFARS 252.223.370-4, PGI 223.370-4(1)(III)<(>,<)>

DISPOSAL OF REMAINING GFM AMMUNITION AND

EXPLOSIVES FOLLOWING CONTRACT COMPLETION OR

TERMINATION INSTRUCTIONS, SHALL BE PART OF THE SOLICITATION/CONTRACT.

PLEASE SUBMIT REQUEST FOR GFM AUTHORIZATIONS TO

DLA.LANDANDMARITIME.GFPMANAGER@DLA.MIL.

_______END SPECIAL GFE AND GFM REQUIREMENTS_______

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

PAGE 9 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

TDP Rev B Gen 2

IAW BASIC DRAWING NR 19200 13013473

REVISION NR A DTD 03/19/2012

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597040

REVISION NR J DTD 09/10/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11825992

REVISION NR M DTD 06/16/2011

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11825993

REVISION NR U DTD 11/10/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11825994

REVISION NR N DTD 12/03/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11825995

PAGE 10 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

REVISION NR P DTD 09/10/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11825996

REVISION NR R DTD 11/24/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11826001

REVISION NR Y DTD 06/12/2019

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR E DTD 02/18/2026

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597038

REVISION NR L DTD 06/16/2011

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597042

REVISION NR H DTD 02/04/2009

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597043

REVISION NR N DTD 09/19/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12976826

REVISION NR G DTD 11/12/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12976827

REVISION NR J DTD 09/19/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12976828

REVISION NR K DTD 11/12/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12976829

REVISION NR J DTD 12/13/2023

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 7266299

REVISION NR T DTD 02/01/2012

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597041

REVISION NR J DTD 09/10/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13016480

REVISION NR D DTD 03/27/2024

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13016474

REVISION NR B DTD 06/16/2011

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13016478

REVISION NR B DTD 06/16/2011

PART PIECE NUMBER:

PAGE 11 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

IAW REFERENCE DRAWING NR 19200 13016479

REVISION NR E DTD 03/27/2024

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13016481

REVISION NR B DTD 07/14/2010

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12597039

REVISION NR L DTD 11/10/2014

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 11825998

REVISION NR V DTD 06/09/2025

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13016091

REVISION NR B DTD 06/16/2011

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013485

REVISION NR B DTD 08/09/2024

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013474

REVISION NR E DTD 03/18/2018

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013475

REVISION NR A DTD 03/18/2018

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013486

REVISION NR B DTD 11/09/2021

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013473

REVISION NR A DTD 11/04/2022

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13013473

REVISION NR DTD 11/18/2025

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR MIL-DTL-63314

REVISION NR E DTD 10/28/2016

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE DRAWING NR 19200 13114207

REVISION NR A DTD 10/22/2024

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE SPEC NR MIL-DTL-16232H(1) NOT 1

REVISION NR H DTD 01/26/2026

PAGE 12 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

IAW REFERENCE UNK DI-NDTI-80809B NOT 3

REVISION NR B DTD 09/24/2024

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

TDP Rev B Gen 2

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1005-01-564-6769 225.000 EA $ ________________ $ ________________

BARREL ASSEMBLY

,SHO

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 546 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

SPI - MOP ZZ: Preservation, Packaging, Packing and Marking shall be in accordance with Special Packaging Instruction AM13013473, except as governed by Contract C requirements. DATED NOVEMBER 4, 2022

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

PAGE 13 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION B

SUPPLY/SERVICE: 1005-01-564-6769 CONT'D

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 0001 - S00000053 1.000 EA $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

FOB: DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7018683654 0001 N/A N/A N/A 10/16/2028

0002 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

C20 VENDOR SHIPMENT MODULE (VSM) (MAY 2026)

C16 FIRST DESTINATION TRANSPORTATION PROGRAM, GOVERNMENT ARRANGED TRANSPORTATION FOR MANUAL AWARDS

(AUG 2017)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

SECTION E - INSPECTION AND ACCEPTANCE

E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025)

(1) If there is not a separate contract line item number (CLIN) for FAT, the offeror shall include all costs and risk associated with completion of the FAT requirement in the production CLIN price.

(2) If there is a separate FAT CLIN, the offeror shall include all costs and risk associated with completion of the FAT requirement in the FAT CLIN price.

The unit of issue for the FAT CLIN, EACH, is equal to one First Article Test (1EA=1FAT). To receive payment for any costs associated with FAT, the offeror shall propose costs associated with FAT on a separate CLIN. The offeror shall base the production CLIN price solely on all costs associated with completion of the production units and shall exclude all FAT-related costs.

(3) The contracting officer will use the total award price in selecting the best value offer from among all eligible offerors. However, for an offeror to be eligible for award, the contracting officer must determine that the FAT CLIN price (unless FAT is waived) and the production CLIN price are fair and reasonable; and, if set-aside under FAR Part 19, a fair market price. The offeror shall not propose a FAT CLIN price that is materially unbalanced in relation to the production CLIN price. In the event an offeror receives a waiver of the FAT requirement, the contracting officer will deduct the FAT CLIN price for the waived source in determining the total award price.

(4)(a) Notwithstanding the conditions for waiving first article, the contracting officer may order an additional first article sample, or portion thereof, in writing if there is a --

(i) Major change to the technical data;

(ii) Lapse in production for a period in excess of 90 days; or

(iii) Change in the place of performance (manufacturing facility), manufacturing process,material used, drawing, specification or source of supply.

(b) When conditions in paragraphs (4)(a)(i), (ii), or (iii) occur, the contractor shall notify the contracting officer; who will determine whether to order an additional first article sample or portion thereof and provide instructions concerning the submission, inspection, and notification of results. The contractor shall bear the costs of the additional first article testing resulting from any of the causes in paragraphs (4)(a)(i)-(iii) instituted by the contractor and not due to changes directed by the Government.

(5) Waivers. The offeror may submit a request for FAT waiver to the contracting officer, who may waive the FAT requirement when all of the following criteria apply:

(a) The offeror requesting waiver has successfully manufactured, delivered and the government accepted the item or a similar item. The offeror shall provide the following information and be prepared to provide documentary evidence upon the contracting officer's request:

(i) Contract number(s), date(s), and issuing Government agency or agencies.

(ii) Description of item previously furnished, identified by part number, type, model number and/or other identifying information. If the item previously furnished is similar but not identical to the item being acquired under the current buy, the offeror shall explain why manufacture of the item previously furnished is sufficient to demonstrate its ability to manufacture the item being acquired under the current buy without need for a first article test.

(iii) Engineering control document/change number of item previously furnished.

(b) There have been no changes to manufacturing processes, tooling, or place of performance.

(c) There have been no changes to manufacturing data (e.g., drawing revisions that change materials, dimensions, processes, inspection or testing requirements; or subcontractors used to manufacture the items successfully in the past).

(d) The offeror shall supply an item of the same design and manufactured by the same method at the same facilities as the item or similar item previously furnished and accepted under subparagraph (5)(a).

(6) Contractor-Performed FAT.

(a) The contractor shall test the quantities as outlined in paragraph (a) of FAR clause 52.209-3 as specified in the contract. The contractor shall submit reports in accordance with paragraph (b) of FAR clause 52.209-3, as supplemented in this procurement note.

(b] For test report preparation and delivery of contractor FAT, the contractor shall --

(i) Use the data item description DI-NDTI-80809B report format.

(ii)] Mark the test report with the following: “First article test report - Contract number:[ ] and lot/item number: [ ].

(iii) Sign the FAT Report, accompanied by the system of record receiving report (i.e, WAWF or] DD Form 250) and contractor confirmation that the same process and facilities used to manufacture the first article units will be used to manufacture the production units, to the contracting officer at the applicable address shown below:

(A) For awards issued by DLA Aviation; or DLA Troop Support Clothing and Textile (C&T), Medical Materiel, or Subsistence, submit the report to the procuring activity in Block 6 of the DD Form 1155, Block 7 of Standard Form (SF) 33, Block 5 of SF 26, or Block 9 of SF 1449 award.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

(B) For awards issued by DLA Land (SPE7L), submit the report to the following address:

DLA Land - FLSEB ATTN: FAT Monitor P. O. Box 3990 Columbus, OH 43218-399, or email to: Land.FAT.Monitor@dla.mil.

(C) For awards issued by DLA Maritime (SPE7M), submit the report to the following address:

DLA Maritime - FMSE ATTN: FAT Monitor P. O. Box 3990 Columbus, OH 43218-3990, or email to: maritime.fat.monitor@dla.mil.

(D) For awards issued by DLA Troop Support Construction and Equipment (SPE8E), email the report to Construction and Equipment FAT Monitor at trpsptcandefatmonitor@dla.mil. If report exceeds email limitations, submit the report to the following address:

DLA Troop Support ATTN: First Article Testing Monitor Building 3, 700 Robbins Avenue Philadelphia, Pennsylvania 19111.

Preferred electronic submissions: Hardware FAT Monitor at DLAHardwareFATMonitor@dla.mil.

(7) The contractor shall --

(a) Provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3;

(b) Maintain and make available all records evidencing those details at the Government's request.

(c) At least fourteen (14) calendar days (or as otherwise specified in the contract) prior to shipment to the Government, provide written notice to the contracting officer and to the cognizant DCMA Functional Specialist when full administration or Quality Support administration is delegated to DCMA.

(8) Government-performed FAT. The contractor shall --

(a) For delivery of separately priced Government first article samples for Government performed FAT ship the units and system of record receiving report (i.

e., WAWF or DD Form 250) to the test facility specified in paragraph (a) of FAR clause 52.209-4.

(b) For delivery of Government first article samples that are not separately priced, ship the units with a commercial shipping document to the test facility.

(c) Prepare the shipping container(s) by marking the external packages in bold letters, “First Article Exhibits - Do Not Post to Stock," adjacent to the MIL- STD-129 (latest revision) identification markings.

(d) Use a hard copy of the system of record receiving report (i.e., WAWF DD Form 250), or commercial shipping document as a packing list, in accordance with DFARS Appendix F.

(e) Mark the exterior of the shipping container in accordance with MIL-STD-129 (latest revision), paragraph 5.11.

(f) In the interior package, include hard copies of the contract, test reports, material certifications/process operation sheets, drawings used to manufacture the units, and a pre-paid return label or shipping account for payment.

(g) Send units by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express).

(h) Send an email with subject titled “Notification of Test Exhibits [ ]” to the corresponding address in (i) or (ii) below and to the contracting officer specified in the contract. In the email, provide the shipment date, contract/purchase order number, National Stock Number, means of transportation, tracking number, and summary of container contents. Attach a copy of the system of record receiving report (i.e., WAWF or DD Form 250) documenting the Government has performed the contract quality assurance within the system or record.

(i) DLA Land & Maritime - DSCCProdVerif@dla.mil

(ii) DLA Aviation - DSCR.Test & EvaluationOffice@dla.mil

(9) At its discretion, the Government may return FAT units to the contractor at no cost to the Government. The contractor shall submit the return address and pre-paid return label or shipping account for payment.

(10) If the Government disapproves or conditionally approves Government-performed FAT units, the Government will take action in accordance with FAR 52.209-4.

E09 CONTRACTOR FIRST ARTICLE TEST (FAT) INFORMATION (JUL 2022)

(1) For FAT requirements, the Government will conduct inspection at source and acceptance at destination. The FOB point is destination. Due to known systems limitations, solicitations may contain erroneous inspection, acceptance, and FOB points. This procurement note takes precedence over any conflicting terms.

(2) CONTRACTOR FAT DELIVERY SCHEDULE

(a) Days: To Deliver FAT Report to the Government

(b) Days: Government FAT Report Evaluation and Notification to Contractor

(c) Days: To Deliver Final Production Quantity After Approval of FAT Report. If PLT applies, this line will be blank; the number of delivery days for final production quantity will appear in procurement note E03, Production Lot Testing - Contractor, or E04, Production Lot Testing - Government, as applicable

(d) Total Delivery Days for FAT (Sum of Paragraphs (2)(a) through (2)(c))

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

Title Number Date Tailoring

SEE SOLICITATION

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

E05 PRODUCT VERIFICATION TESTING (MAY 2020)

(1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory.

(2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing.

(3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor's signed DD Form 1222.

The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples - Do Not Post to Stock," Contract Number [ ] and Lot/Item Number [ ]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package:

(a) Hard copies of the contract;

(b) Material certifications/process operation sheets; and

(c) Drawings used to manufacture the units and return shipping information.

(4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery.

(5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor.

E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

[ ] Same as for supplies OR CAGE code:

Address:

Applicable to CLIN(s):

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

SECTION F - DELIVERIES OR PERFORMANCE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 43 PAGES

SPE7L1-27-Q-0096

SECTION F - DELIVERIES OR PERFORMANCE (CONTINUED)

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-29 F.O.B. ORIGIN (FEB 2006) FAR

52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS (APR 1984) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall -

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert…