SPE5EY16R0005_LTC_PID_Packaging_Consolidated_Text.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:015557805

SETSCREW (COLLAR SHAFT & SETSCREW)

U S ARMY TANK AUTOMOTIVE COMMAND 19207

WARREN MI

P/N 12423824

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS032

REFERENCE NUMBER:ZD022

FASTENAL COMPANY 0Y3H3 P/N 10975-01205

IAW REFERENCE DRAWING NR 19207 12423824

REVISION NR DTD 09/23/2008

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN:007025020

NUT,SELF-LOCKING,EXTENDED WASHER,DOUBLE

US ARMY AVIATION AND MISSILE COMMAND (18876)

HUNTSVILLE, AL.

P/N 11502722-1

ACCEPTABLE SOURCE FOR ABOVE PART NUMBER:

SPS TECHNOLOGIES (56878) JENKINTOWN PA

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:IS083

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZE002

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC DBA 56878 P/N FN1216-428

IAW REFERENCE DRAWING NR 18876 11502722

REVISION NR E DTD 09/22/2006

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:011335373

WASHER, FLAT

SOURCE CONTROL DOCUMENT

U.S. ARMY TANK-AUTOMOTIVE COMMAND (19207)

P/N 11662296-10

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

NAVISTAR DEFENSE LLC DBA 338X5 P/N 1676229C1

MERITOR HEAVY VEHICLE SYSTEMS LLC 78500 P/N 1229-B-1848

IAW BASIC DRAWING NR 19207 11662296

REVISION NR B DTD 11/11/1972

PART PIECE NUMBER: P/N 11662296-10

IAW REFERENCE DRAWING NR 19207 11662296-10

REVISION NR DTD 10/23/2012

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD017

NSN:014090912

WASHER,FLAT

US ARMY TANK AUTOMOTIVE COMMAND 19207

P/N 12347656-51

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA060

REFERENCE NUMBER:ZE002

CRITICAL APPLICATION ITEM

FABRICATION SPECIALTY, INC. DBA 28548 P/N 12347656-51

IAW REFERENCE DRAWING NR 19207 12347656

REVISION NR G DTD 12/07/2007

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

NSN:014545553

WASHER, SEAL

U S ARMY TANK AUTOMOTIVE COMMAND 19207

P/N 12418424-001

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

PARTS LIFE INC. 4MJR3 P/N 12418424-001

BRIGHTON CROMWELL LLC 3NNX8 P/N 12418424-002

DANA COMMERCIAL VEHICLE 9R200 P/N 673999

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12418424-001

REVISION NR DTD 10/18/2012

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:004

NSN:015050271

NUT, PLAIN, EXTENDED WASHER, HEXAGON

US ARMY AUTOMOTIVE TANK COMMAND 19207

P/N 12501532

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

GULF COAST HERMETICS 1KE17 P/N 001025-1-904

IAW REFERENCE DRAWING NR 19207 12501532

REVISION NR A DTD 11/30/2005

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

NSN:013790698

PIN,QUICK RELEASE

U S ARMY AVIATION AND MISSILE COMMAND 18876

P/N 11473019

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:ZD025

MARATHONNORCO AEROSPACE, INC. DBA 08844 P/N IL3382-1

GK MECHANICAL SYSTEMS LLC DBA 3BU57 P/N 22-1293-01

SIELMAN S.A. DBA SIELMAN S.A. G1005 P/N 2254000

IAW REFERENCE DRAWING NR 18876 11473020

REVISION NR A DTD 08/01/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 18876 11473019

REVISION NR DTD 12/14/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 18876 11473019

REVISION NR B DTD 03/09/2012

PART PIECE NUMBER: DWG P/N 11473019

IAW REFERENCE DRAWING NR 49956 MI-P5314

REVISION NR 1 DTD 11/10/2011

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:010146197

PIN-RIVET, THREADED

US ARMY ARDEC RDECOM 19200

P/N 12524614-1

REFERENCE NUMBER:CS001

INCLUDE IS083 OBJECT TEXT ID ST

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC 06725 P/N HL20PB-12-16

ALCOA GLOBAL FASTENERS, INC. DBA 06950 P/N HL20PB-12-16

HUCK INTERNATIONAL, INC. DBA ALCOA 17446 P/N HL20PB12-16

SPS TECHNOLOGIES, LLC DBA 56878 P/N HL20PB12-16

HI-SHEAR CORPORATION DBA 73197 P/N HL20PB-12-16

WEST COAST AEROSPACE INC DBA 60516 P/N HL20PB-12-16

IAW REFERENCE DRAWING NR 19200 12524614

REVISION NR B DTD 02/21/1996

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:011753786

PIN-RIVET

U S ARMY ARMAMENT R<(>&<)>D COMMAND(19200)

P/N 12707836-4

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IA061

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC 06725 P/N 12707836-4

HUCK INTERNATIONAL, INC. DBA ALCOA 17446 P/N HL21PB86-8-7

ALCOA GLOBAL FASTENERS, INC. DBA 92215 P/N HL21PB86-8-7

HI-SHEAR CORPORATION DBA 73197 P/N HL21PB86-8-7

WEST COAST AEROSPACE INC DBA 60516 P/N HL21PB86-8-7

LISI AEROSPACE CANADA CORP DIV HI L4528 P/N HL21PB86-8-7

IAW REFERENCE DRAWING NR 19200 12707836

REVISION NR DTD 06/24/1995

PART PIECE NUMBER: 12707836-4

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:014141459

RIVET,BLIND

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

HUCK INTERNATIONAL, INC. DBA ALCOA 17446 P/N MBP-R8-M8

HUCK FASTENERS DBA HUCK INTL INC 9K475 P/N MBP-R8-M8

IAW REFERENCE DRAWING NR 19207 12449500

REVISION NR A DTD 12/27/2012

PART PIECE NUMBER: 12449500-3

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:002827463

EYELET, TURNLOCK FASTENER

U S ARMY AVIATION AND MISSILE COMMAND 18876

P/N 8168842

REFERENCE NUMBER:ZD074

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 71286 P/N 4002-H

MONADNOCK COMPANY, THE DBA LISI 60119 P/N 4002H

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N 4002H

IAW REFERENCE DRAWING NR 18876 8168842

REVISION NR B DTD 09/22/2006

PART PIECE NUMBER: DWG P/N 8168842

LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:002910388

RECEPTACLE,TURNLOCK FASTENER

U/I - HD(100), QUP - 001

ACCEPTABLE SOURCE

THE BOEING COMPANY DBA BOEING 81205 P/N BACS20B5P130

MONADNOCK COMPANY, THE DBA LISI 60119 P/N 99833P130

BOEING COMPANY, THE DBA BOEING 76301 P/N 9M152-5-P130

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS075

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

IAW REFERENCE DRAWING NR 18876 8518276

REVISION NR D DTD 09/21/2006

PART PIECE NUMBER: 8518276

LINE ITEM 00012 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:A1 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:004492797

EYELET, TURNLOCK FASTENER

SOURCE CONTROL DATA

US.ARMY TANK AUTOMOTIVE COMMAND (19207)

WARREN, MI

P/N 7601760

REFERENCE NUMBER:ZD074

U/I HD(100, QUP - 001

APPROVED SOURCE

ALCOA FASTENING SYSTEMS CAMLOC PRODUCTS (71286)

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 71286 P/N 4002G

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N 4002-G

IAW BASIC DRAWING NR 19207 7601760

REVISION NR A DTD 08/30/1963

PART PIECE NUMBER: DWG P/N 7601760

IAW REFERENCE DRAWING NR 19207 10864585

REVISION NR A5 DTD 04/11/1995

LINE ITEM 00013 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:005433410

STUD ASSEMBLY,TURNLOCK FASTENER

US ARMY ARDEC RDECOM 19200

P/N 10554212

APPROVED SOURCE

ALCOA GLOBAL FASTENERS, INC. DBA 71286 P/N 2600-6S

GALI Corp 0AMA 0P/N 2600-6S

SKORSKY 78286 P/N 2600-6S

REFERENCE NUMBER:ZD025

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 10554212

REVISION NR DTD 10/25/1968

PART PIECE NUMBER: P/N 10554212

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 10554212

REVISION NR DTD 06/02/2014

LINE ITEM 00014 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:006372369

RECEPTACLE,TURNLOCK FASTENER

U.S.ARMY TANK AUTOMOTIVE COMMAND (19207)

WARREN,MI

P/N 10922419

IDENTIFY TO:

REFERENCE NUMBER:ZM007

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 71286 P/N 214-16

SIEMENS AG - ANL A44 S - C0680 P/N 214-16

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N 214-16

IAW REFERENCE DRAWING NR 19207 10922419

REVISION NR A DTD 03/26/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 418374

REVISION NR A DTD 05/14/1979

LINE ITEM 00015 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:100 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:A1 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:010987896

STUD, TURNLOCK FASTENER

U.S.ARMY MISSILE AND AVIATION COMMAND (18876)

HUNTSVILLE,AL.

P/N 11438379-4

IDENTIFY TO

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

FASTENER TECHNOLOGY CORP. 58794 P/N 11438379-4

ALCOA GLOBAL FASTENERS, INC. DBA 29372 P/N CA18168-4

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N CA18168-4

IAW REFERENCE DRAWING NR 18876 11438379

REVISION NR J DTD 02/20/1991

LINE ITEM 00016 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:012722676

STUD ASSEMBLY,TURNLOCK

U.A.ARMY MILLILE AND AVIATION COMMAND (18876)

HUNTSVILLE,AL

P/N 11466182-1

REFERENCE NUMBER:IS033

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:I0045

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 71286 P/N 26S51-9

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N 26S51-9

IAW REFERENCE DRAWING NR 18876 11466182

REVISION NR DTD 09/18/2006

LINE ITEM 00017 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:050

NSN:013916555

STUD TURNLOCK FASTENER

U S ARMY MISSILE COMMAND(18876)

REDSONE ARSENAL ,ALABAMA

P/N11438379-6

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IDD01

FASTENER TECHNOLOGY CORP. 58794 P/N FT5032-6

ALCOA GLOBAL FASTENERS, INC. DBA 29372 P/N CA18168-6

ALCOA FASTENING SYSTEMS FAIRCHILD D0680 P/N CA18168-6

IAW REFERENCE DRAWING NR 18876 11438379

REVISION NR J DTD 02/20/1991

LINE ITEM 00018 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:003775503

GASKET

REFERENCE NUMBER:ZI007

U S ARMY AVIATION AND MISSILE COMMAND 18876

P/N 11030849-1

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

ACTUANT CORP DBA ENERPAC 26952 P/N A1018037

ENERPAC LTD K0517 P/N A1018037

IAW REFERENCE DRAWING NR 18876 11030849

REVISION NR A DTD 06/09/1966

PART PIECE NUMBER: 11030849-1

LINE ITEM 00019 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CONTRACTOR INSTRUCTIONS:

MARK ORDNANCE PART NUMBER

11030849-1 ON PACKAGE LABEL

NSN:004860372

SEAL PLAIN

SOURCE CONTROL DATA

US ARMY TANK-AUTOMOTIVE COMMAND (19207)

P/N 11682694

REFERENCE NUMBER:ZDP01

APPROVED SOURCES

FEDERAL-MOGUL CORP GOVERNMENT 01212 P/N 7399S

DANA AUTOMOTIVE SYSTEMS GROUP, LLC 79150 P/N 63159

ACCEPTABLE SOURCES MUST MEET LATEST REV

OF OEM DRAWING.

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 11682694

REVISION NR A DTD 02/25/1975

LINE ITEM 00020 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:005805329

PACKING WITH RETAINER

US ARMY AVIATION & MISSLE COMMAND (18876)

P/N 9176823

1PG = 50EA

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IP061

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

DBR INDUSTRIES, INC. DBA 1K697 P/N 110-8

PARKER HANNIFIN CORPORATION 25184 P/N 110-8

IAW REFERENCE DRAWING NR 18876 9176823

REVISION NR B DTD 08/01/1967

LINE ITEM 00021 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:000

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

NSN:007360281

SEAL, TRANSMISSION

SOURCE CONTROL DATA

US ARMY TANK AUTOMOTIVE 19207

P/N 8351582

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS083

REFERENCE NUMBER:ZD001

REFERENCE NUMBER:IS031

CRITICAL APPLICATION ITEM

FEDERAL-MOGUL CORP GOVERNMENT 01212 P/N 476098RAR, COMP K02

IAW BASIC DRAWING NR 19207 8351582

REVISION NR H DTD 01/17/1997

PART PIECE NUMBER: 8351582

IAW REFERENCE DRAWING NR 19207 TAC-V3312

REVISION NR DTD 07/18/2008

LINE ITEM 00022 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:011024681

SEAL, PLAIN

US ARMY TANK AUTOMOTIVE 19207

P/N 12296710

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDP01

SOURCE CONTROL DATA

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IP037

REFERENCE NUMBER:IS083

CATERPILLAR INC CATERPILLAR 06YY8 P/N 132-0369

GORIZIANE GROUP SPA DBA A9271 P/N 12296710

IAW BASIC DRAWING NR 19207 12296710

REVISION NR E DTD 12/13/1999

PART PIECE NUMBER: 12296710

IAW REFERENCE QAP 19207 12296710

REVISION NR A DTD 04/29/1980

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R

REVISION NR R DTD 10/03/2006

LINE ITEM 00023 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:011053324

SEAL,PLAIN

SOURCE CONTROL DOCUMENT

U S ARMY TANK AUTOMOTIVE COMMAND (19207)

P/N 12296765

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:ZE002

CRITICAL APPLICATION ITEM

CATERPILLAR INC CATERPILLAR 06YY8 P/N 132-0467

NORMAN TECHNOLOGY, INC. DBA NTI 1YBZ6 P/N 1978

GORIZIANE GROUP SPA DBA A9271 P/N 12296765

IAW BASIC DRAWING NR 19207 12296765

REVISION NR F DTD 06/22/2010

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12296765

REVISION NR A DTD 06/26/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12296765

REVISION NR DTD 10/05/2012

LINE ITEM 00024 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:012036551

SEAL,PLAIN ENCASED

US ARMY TANK AUTOMOTIVE 19207

P/N 12342961

SOURCE CONTROL

HOUSING BORE DIAMETER - 4.2485 IN. MIN. 4.2515 IN. MAX. DIA.

IDENTIFY TO

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:ZE002

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZDP01

BRIGHTON CROMWELL LLC 3NNX8 P/N 10010489

SKF USA INC. DBA SKF AEROSPACE 80201 P/N CR 535094-60

ERGOSEAL, INC. 1L0H7 P/N 1981

ERGOSEAL, INC. 1L0H7 P/N 12342961

IAW BASIC DRAWING NR 19207 12342961

REVISION NR C DTD 09/14/2006

PART PIECE NUMBER: 12342961

IAW REFERENCE QAP 19207 12342961

REVISION NR B DTD 04/03/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342961

REVISION NR DTD 10/20/2014

LINE ITEM 00025 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:012658947

SEAL,NONMETALLIC SPECIAL SHAPED SECTION

US ARMY TANK AUTOMOTIVE COMMAND (19207)

P/N 12341211-8

IDENTIFY TO

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

KENDALL CANADA INC HOME HEALTH 09540 P/N 2341211-8

AM GENERAL LLC 34623 P/N 5593797

SCHLEGEL SYSTEMS INC DIV ROCHESTER 77824 P/N 12341211-8

IAW REFERENCE DRAWING NR 19207 12341211

REVISION NR D DTD 09/30/1991

PART PIECE NUMBER: 12341211-8

LINE ITEM 00026 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:013720298

SEAL, PLAIN ENCASED

US ARMY TANK AUTOMOTIVE 19207

P/N 12418050

REFERENCE NUMBER:ZDP01

IDENTIFY TO

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IP036

CRITICAL APPLICATION ITEM

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12418050

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12418050

PARKER-HANNIFIN CORPORATION DBA 48482 P/N P-19751

OSHKOSH DEFENSE, LLC DBA 75Q65 P/N 12418050

IAW REFERENCE DRAWING NR 19207 12418050

REVISION NR A DTD 04/13/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12418050

REVISION NR DTD 01/22/2013

LINE ITEM 00027 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:X

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:IP029

NSN:013812357

GASKET

US ARMY TANK AUTOMOTIVE 19207

P/N 12419090

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:CA061

CRITICAL APPLICATION ITEM

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12419090

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12419090

PATRIA LAND SYSTEMS OY DBA A001G P/N 35-P-75

DANA CORP DRIVETRAIN SERVICE DIV 8N900 P/N 35P-74

OSHKOSH DEFENSE, LLC DBA 75Q65 P/N 7HA585

CHELSEA PARKER HYDRAULICS U6025 P/N 35-P-74

IAW REFERENCE DRAWING NR 19207 12419090

REVISION NR DTD 09/21/2006

LINE ITEM 00028 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:BE OPI:M

INTRMDTE CONT:XX INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CONTRACTORS USE ONLY:COMMERCIAL PACKAGING

IS ACCEPTABLE.

DEPOT USE ONLY:REPACK QUP 1 EACH IAW

LEVEL A REQUIREMENTS/ MARK IAW MIL-STD 129.

REFERENCE NUMBER:ZD017

NSN:002022418

O-RING

US ARMY TANK AUTOMOTIVE COMMAND(19207)

P/N 7709259

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IP029

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ATLANTIC INDIA RUBBER CO INC DBA 70485 P/N 7709259

PARKER-HANNIFIN CORPORATION DBA 02697 P/N 7709259

PARKER-HANNIFIN CORPORATION DBA 45681 P/N 7709259

IAW BASIC DRAWING NR 19207 7709259

REVISION NR B DTD 05/02/1975

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-R-3065E(1) NOT 2

REVISION NR E DTD 01/21/2000

PART PIECE NUMBER: GR SC 710 BE3 F1

IAW REFERENCE STD NR MIL-STD-417A NOT 4

REVISION NR A DTD 12/05/1995

LINE ITEM 00029 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:X PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:002911989

O-RING

US ARMY TANK AUTOMOTIVE COMMAND(19207)

P/N 7708793

SOURCE CONTROL DATA

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IP061

REFERENCE NUMBER:IS083

REFERENCE NUMBER:ISC01

REFERENCE NUMBER:ZD001

PARKER-HANNIFIN CORPORATION DBA 91265 P/N 7708793

ACUSHNET RUBBER COMPANY, INC. DBA 70106 P/N 7708793

ATLANTIC INDIA RUBBER CO INC DBA 70485 P/N 7708793

ALLISON TRANSMISSION, INC. DBA 73342 P/N 6766430

GENERAL MOTORS CORP 24617 P/N 6766430

PARKER HANNIFIN CORPORATION 25184 P/N 7708793

PARKER-HANNIFIN CORPORATION DBA 02697 P/N 7708793

IAW BASIC DRAWING NR 19207 7708793

REVISION NR G DTD 01/17/2011

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R

REVISION NR R DTD 10/03/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7708793

REVISION NR DTD 01/14/2013

LINE ITEM 00030 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:X PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:BV OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:013896028

O-RING

US ARMY TANK AUTOMOTIVE COM 19207

P/N 12420343

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12420343

TITAN WHEEL CORPORATION OF 20076 P/N 52-49610-00

TITAN WHEEL CORPORATION OF 20076 P/N 52496100

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12420343

HUTCHINSON INDUSTRIES, INC. DBA 62161 P/N D528280-3

IAW REFERENCE DRAWING NR 19207 12420343

REVISION NR DTD 09/20/2006

PART PIECE NUMBER: 12420343

LINE ITEM 00031 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:X PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:M

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD017

NSN:000719233

BAND, RETAINING

US ARMY TANK AUTOMOTIVE 19207

P/N 7766720

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

V I J CORPORATION DBA NUCO 94581 P/N 4088AB

EATON CORPORATION DBA AEROSPACE DIV 00624 P/N 43866

IAW REFERENCE DRAWING NR 19207 7766720

REVISION NR 5 DTD 05/15/1956

LINE ITEM 00032 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

NSN:010840007

BOOT, DUST AND MOISTURE SEAL.

US ARMY TANK AUTOMOTIVE COM 19207

P/N 12273242-210

TYCO (SU473)

PN: 202C 621-51

HELLERMANN TYTON (4S037)

PN: 313C732-9

REFERENCE NUMBER:IP087

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS083

CERTIFICATE OF CONFORMANCE (FAR 52.246-15) IS REQUIRED.

CRITICAL APPLICATION ITEM

GLENAIR, INC. DBA 06324 P/N 770-022C602

GENERAL DYNAMICS LAND SYSTEMS - 56161 P/N 10652583-2

HELLERMANNTYTON LIMITED K0720 P/N 313C732-9

IAW BASIC DRAWING NR 19207 12273242

REVISION NR V DTD 09/23/2015

PART PIECE NUMBER: 12273242-210

IAW REFERENCE DRAWING NR 19207 12273242-210

REVISION NR DTD 02/18/2015

LINE ITEM 00033 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EC CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:010840011

BOOT, DUST AND MOISTURE SEAL

US ARMY TANK AND AUTOMOTIVE COM 19207

P/N 12273242-410

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IP029

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

COLONIAL WIRE & CABLE CO. 4S037 P/N 12273242-410

TYCO ELECTRONICS TECNOLOGIAS, S.A. SU473 P/N 12273242-410

IAW BASIC DRAWING NR 19207 12273242

REVISION NR R DTD 05/17/2010

PART PIECE NUMBER: 12273242-410

IAW REFERENCE STD NR MIL-STD-129R

REVISION NR R DTD 10/03/2006

PART PIECE NUMBER: TYPE I SHELF LIFE 15 MOS

IAW REFERENCE DRAWING NR 01417 SC-X15111

REVISION NR D DTD 10/05/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SC-X15112

REVISION NR C DTD 10/05/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273242-410

REVISION NR DTD 10/22/2012

LINE ITEM 00034 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:XX

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:A1

INTRMDTE CONT:XX INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:011786865

HARDWARE KIT, ELECTRONIC EQUIPMENT

REFERENCE NUMBER:ZI007

US ARMY ARDEC RDECOM 19200

P/N 12273407

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:IS075

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ITT CORPORATION DBA I T T CANNON 71468 P/N D110550

IAW BASIC DRAWING NR 19207 12273407

REVISION NR F DTD 09/22/2006

PART PIECE NUMBER: P/N 12273407

LINE ITEM 00035 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:A1 OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:IP026

NSN:012658923

STRAP,WEBBING

U.S.ARMY TACOM(19207)

WARREN, MI

P/N 12339817-4

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ANCRA INTERNATIONAL LLC 31272 P/N 44647-18

AM GENERAL LLC 34623 P/N 5595260

IAW REFERENCE DRAWING NR 19207 12339817

REVISION NR D DTD 03/21/2009

PART PIECE NUMBER: 12339817-4

LINE ITEM 00036 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NSN:014841472

STRAP,WEBBING

US ARMY TANK AND AUTOMOTIVE COM 19207

P/N 12419905

NOTE: MATERIAL IS TO BE POLYESTER, LOW ELONGATION IAW

CID A-A-55242, TY 2, CL 1, COLOR OLIVE DRAB

NO EXCEPTIONS

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

D. W. INDUSTRIES, INC. DBA 0TE27 P/N 12419905

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12419905

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12419905

IAW REFERENCE DRAWING NR 19207 12419905

REVISION NR A DTD 04/09/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12419905

REVISION NR DTD 01/21/2011

LINE ITEM 00037 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:014955767

PLATE, MOUNTING

U.S. ARMY TACOMM (19207)

WARREN MI

P/N 12422593 Revision C dtd 9/27/2005

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS053

CRITICAL APPLICATION ITEM

BARRY WRIGHT CORPORATION DBA BARRY 81860 P/N 12422593

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12422593

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12422593

LORD CORPORATION DBA AEROSPACE 76005 P/N J-21918-2

IAW REFERENCE DRAWING NR 19207 12422593

REVISION NR C DTD 09/27/2005

LINE ITEM 00038 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:00 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:IP009

REFERENCE NUMBER:IP008

NSN:015216447

CLIP, ROD RETAINER

U.S. ARMY TACOMM (19207)

WARREN MI

P/N 12423363-002

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12423363-002

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12423363-002

IAW BASIC DRAWING NR 19207 12423363

REVISION NR DTD 07/14/2003

PART PIECE NUMBER: 12423363-002

IAW REFERENCE DRAWING NR 19207 12423363-002

REVISION NR DTD 01/04/2007

LINE ITEM 00039 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:015252707

CLAMP,LOOP

(19207) U S ARMY TANK AUTOMOTIVE COMMAND

WARREN MI

P/N 12423118

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IVC01

BAE SYSTEMS LAND ARMAMENTS L.P. 076M6 P/N 12423118-001

CUMMINS FILTRATION INC. DBA 33457 P/N 90368A

BAE SYSTEMS TACTICAL VEHICLE 0FW39 P/N 12423118-001

OSHKOSH DEFENSE, LLC DBA 75Q65 P/N 12423118-001

IAW REFERENCE DRAWING NR 19207 12423118

REVISION NR C DTD 10/09/2008

PART PIECE NUMBER: P/N 12423118

LINE ITEM 00040 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:015334172

CLAMP,LOOP

U S ARMY TANK AUTOMOTIVE COMMAND (19207)

P/N 12342967

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ISC01

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IA061

REFERENCE NUMBER:IS001

MARADYNE CORPORATION DBA 0DBY7 P/N F214A15

EATON CORPORATION DBA EATON QUIP 8W928 P/N NH1008373-20

IAW BASIC DRAWING NR 19207 12342967

REVISION NR C DTD 09/16/2011

PART PIECE NUMBER: P/N 12342967

IAW REFERENCE DRAWING NR 19207 12342868

REVISION NR A DTD 05/10/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342872

REVISION NR A DTD 01/11/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342869

REVISION NR C DTD 05/21/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342967

REVISION NR DTD 06/30/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12460255

REVISION NR A DTD 09/19/2011

PART PIECE NUMBER:

IAW REFERENCE QAP 19209 12342967

REVISION NR B DTD 05/15/2006

LINE ITEM 00041 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

************************************************************************************************************ GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER IS083

WHEN THE PURCHASE ORDER TEXT (POT)

DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND

PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES

AND PART NUMBERS OF A NUMBER OF SPECIFIC

ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)

OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY

ADDITIONAL REQUIREMENTS SET FORTH IN THE POT

ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED

TO MEET THE NEEDS OF THE GOVERNMENT AND ARE

ACCEPTABLE. SUCH PRODUCT(S) ARE EXACT

PRODUCT(S) AS DEFINED IN DLAD 52.217-9002,

CONDITIONS FOR EVALUATION AND ACCEPTANCE OF

OFFERS FOR PART NUMBERED ITEMS.

A VENDOR OFFER/QUOTATION, BID WITHOUT

EXCEPTION, IS A CERTIFICATION THAT THE EXACT

PRODUCT, MANUFACTURED AND/OR SUPPLIED BY ONE

OF THE ENTITIES CITED IN THE POT WILL BE

FURNISHED UNDER THE CONTRACT OR ORDER. ANY

PRODUCT NOT MANUFACTURED AND/OR SUPPLIED

BY ONE OF THE ENTITIES CITED IN THE POT

IS AN ALTERNATE PRODUCT, EVEN THOUGH IT

MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE

DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE

ENTITIES CITED IN THE POT.

IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A

CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE

ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED

SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES

IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO

THE GOVERNMENT.

REFERENCE NUMBER IS032

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

REFERENCE NUMBER IA061

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER ZDP01

FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS

THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN

MILITARY SALES (FMS) AND STOCK SHIPMENTS.

REFERENCE NUMBER IS026

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

REFERENCE NUMBER IP029

TYPE I 60 MONTHS (5 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE

SHALL BE 5 YEARS FROM CURE DATE.

REFERENCE NUMBER IS031

THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF

THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING

OFFERORS NOT CITED AS APPROVED SOURCES IN THE

PURCHASE ORDER TEXT ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF

THE SOURCE APPROVAL REQUEST, TECHNICAL DATA

PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST

ALSO BE SUBMITTED TO DLA WITH THE OFFER.

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

REFERENCE NUMBER IS001

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER IS033

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

DATA PACKAGES MUST BE SUBMITTED TO DLA WITH

THE OFFER.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER IS075

** THIS NSN IS PART OF THE 21N PROGRAM **

REFERENCE NUMBER IP061

TYPE I 180 MONTHS (15 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL

BE 15 YEARS FROM CURE DATE.

REFERENCE NUMBER ISC01

SOURCE CONTROL

REFERENCE NUMBER ZD001

THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE

MANUFACTURED AND TESTED IN ACCORDANCE WITH THE

CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN-

NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO

HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE-

ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.

SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS

CONSIDERING SOURCE APPROVAL.

REFERENCE NUMBER ZI007

WSDC 01F Special Project NSN.

REFERENCE NUMBER ZM007

THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &

RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE

ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA

DRAWINGS PROVIDED.

BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT

NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE

SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT

EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE

ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.

REFERENCE NUMBER IPE03

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZE002

Quality conformance inspection requirements shall be in accordance with clause 52.246-9064.

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY

CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

REFERENCE NUMBER IP087

TYPE I (15 MONTH) SHELF LIFE ITEM: MATERIAL

FURNISHED UNDER THIS CONTRACT/ORDER SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

BE 15 MONTHS FROM CURE DATE.

REFERENCE NUMBER IP037

TYPE I 120 MONTHS (10 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL

BE 10 YEARS FROM CURE DATE.

REFERENCE NUMBER ZD017

In addition to MIL-STD-129 markings, each MRAP palletized shipment shall include two, 10 inch by 10 inch fluorescent yellow sticker/sign/placard with the letters MRAP in 2 inch bold black letters and applied to one side and one panel of palletized load. For better visibility, place the MRAP sticker/sign/placard on the outside of the multiwall container(s) or the pallet, not under any shrink-wrap. The stickers are to be placed high on each side of each container, so they are visible at eye level.

This sticker/sign/placard is required to expedite the receipt and inspection of these shipments. This requirement is only applicable for shipments directed to DDC depots and direct vendor deliveries to CCPs;

and does not apply to direct vendor deliveries to the customer.

ACCEPTABLE DEVIATIONS: Contractor is authorized to make adjustments to actual sticker size and font size when shipping containers are not large enough to adequately display all required MIL-STD-129 markings along with the standard size (as cited above).

OEM MRAP STICKERS: Each OEM has a designated background color in lieu of the standard yellow background MRAP sticker in an effort to apply Lean Six Sigma principles and concepts to packaging, storage, and transport of MRAP material to theater. The following are the official designations (background color # text required):

GREEN # MRAP BAE (TX)

TEAL # MRAP OSHKOSH

PURPLE # MRAP BAE (PA)

ORANGE # MRAP FPII

BLUE # MRAP NAVISTAR

PINK # MRAP GDLS

NOTE: If MRAP stickers are missing or OEM is exhausting yellow background stickers, no quality notification shall be submitted to Contract Administrating Activity.

REFERENCE NUMBER IP026

PACKAGING CODE ZZ/EACH FASTENER SHALL HAVE THE

ENTIRE LENGTH OF THE SHANK AND THREADS…