PIDs_SPE5EN16R0001_Att_A_2-16.docx

PR 1000043364

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:5310000586428

NUT, SELF-LOCKING, EXTENDED WASHER, HEXAGON

SOURCE CONTROL DATA

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:IS031

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 15653 P/N VN326B048

ALLISON TRANSMISSION, INC. DBA 73342 P/N 6846407

IAW BASIC DRAWING NR 63005 6846407

REVISION NR D DTD 04/03/2001

PART PIECE NUMBER: P/N 6846407

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN:5310000586430

NUT,SELF-LOCKING,EXTENDED

REFERENCE NUMBER:ZD025

63005 6843618 REVISION H DTD 18 JULY 2014

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:ZD001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 15653 P/N H29832-5

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

REVISION NR DTD 03/07/2007

PART PIECE NUMBER:

LINE ITEM 00002 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:050

NSN:5310000612012

NUT ASSEMBLY,SELF-LOCKING GANG CHANNEL

SOURCE CONTROL DATA

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

SPS TECHNOLOGIES, LLC DBA 80539 P/N NS102940-5

IAW BASIC DRAWING NR 63005 6857422

REVISION NR C DTD 01/21/1992

PART PIECE NUMBER: DWG P/N 6857422

LINE ITEM 00003 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

NSN:5310001634845

NUT, SPECIAL

SOURCE CONTROL DATA

ROLLS ROYCE CORP (63005)

INDIANAPOLIS,IN

P/N 6876867

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC DBA 56878 P/N 73920

IAW BASIC DRAWING NR 73342 6876867

REVISION NR A DTD 08/02/1971

PART PIECE NUMBER: 6876867

LINE ITEM 00004 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:010

NSN:5310001726922

NUT, SELF-LOCKING, HEXAGON

SOURCE CONTROLLED DATA

ROLLS-ROYCE CORP (63005)

INDIANAPOLIS, IN

P/N 6782887-428

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

APPROVED SOURCE:

SPS TECHNOLOGIES LLC. (56878)

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

SPS TECHNOLOGIES, LLC DBA 56878 P/N 52389-428

IAW BASIC DRAWING NR 63005 6782887

REVISION NR K DTD 02/28/2003

PART PIECE NUMBER: 6782887-428

LINE ITEM 00005 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310002953553

NUT ASSY,SELF-LOCKING,GANG CHANNEL

ROLLS ROYCE CORP 63005

P/N 6846603

REFERENCE NUMBER:ISC01

IDENTIFY TO:

REFERENCE NUMBER:IS001

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N RF-10001

MACLEAN-FOGG COMPANY DBA MAC 019L2 P/N RG7490-048

IAW BASIC DRAWING NR 63005 6846603

REVISION NR F DTD 10/15/1993

PART PIECE NUMBER: DWG P/N 6846603

LINE ITEM 00006 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310004637558

NUT ASSEMBLY, SELF-LOCKING, GANG CHANNEL

SOURCE CONTROL DATA

ROLLS-ROYCE CORPORATION (63005)

INDIANAPOLIS, IN

P/N 6846600

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

MACLEAN-FOGG COMPANY DBA MAC 019L2 P/N 6846600

GENERAL MOTORS CORP 24617 P/N 6846600

SPS TECHNOLOGIES, LLC DBA 80539 P/N 6846600

IAW BASIC DRAWING NR 63005 6846600

REVISION NR F DTD 01/26/1988

PART PIECE NUMBER: 6846600

LINE ITEM 00007 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310004637561

NUT, GANG CHANNEL

SOURCE CONTROL DATA

ROLLS-ROYCE CORP (63005)

P/N 6846604

IDENTIFY TO:

REFERENCE NUMBER:IS001

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N RF-10002

GENERAL MOTORS CORP 24617 P/N 6846604

IAW BASIC DRAWING NR 63005 6846604

REVISION NR G DTD 09/21/2006

PART PIECE NUMBER: P/N 6846604

LINE ITEM 00008 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310005309927

NUT,SELF-LOCKING,EXTENDED WASHER,DOUBLE

ROLLS ROYCE CORP 63005

P/N 6749294-524

REFERENCE NUMBER:ZD025

63005 6749294 REVISION U DTD 07 SEPT 2008

REFERENCE NUMBER:ZD001

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N SL3C-524

SPS TECHNOLOGIES, LLC DBA 56878 P/N E0104-524

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

LINE ITEM 00009 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310006127711

NUT, TIE, BOLT LOCK

ROLLS ROYCE CORP (63005)

INDIANAPOLIS IN

P/N 6785053

ACCEPTABLE SOURCES:

REFERENCE NUMBER:IS033

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6785053

HYDROMACH, INC. DBA 1FG56 P/N 6785051

PACIFIC SKY SUPPLY, INC. DBA 66905 P/N 6785051

GENERAL MOTORS CORP 24617 P/N 6785053

A F B SYSTEMS INC DBA SIERRA TECH 9U283 P/N 6785051

IAW REFERENCE DRAWING NR 63005 6785053

REVISION NR J DTD 10/30/2001

PART PIECE NUMBER: DWG P/N 6785053

LINE ITEM 00010 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5340006130388

BRACKET, MOUNTING

ROLLS-ROYCE CORP (63005)

P/N 6787537

REFERENCE NUMBER:ZD080

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6787537

GENERAL MOTORS CORP 24617 P/N 6787537

LINE ITEM 00011 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

NSN:5340006165140

BRACKET,DOUBLE ANGLE

ROLLS ROYCE CORP 63005

P/N 6814139

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6814139

GENERAL MOTORS CORP 24617 P/N 6814139

LINE ITEM 00012 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:5310006195675

NUT, SELF LOCKING, HEXAGON

SOURCE CONTROL DOCUMENT

ROLLS-ROYCE CORP (63005)

INDIANAPOLIS,IN

P/N 6749115-428

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

APPROVED SOURCE:

REPUBLIC FASTENER CORP (71087)(52828)

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N JL6S428B

IAW BASIC DRAWING NR 63005 6749115

REVISION NR K DTD 09/21/2006

PART PIECE NUMBER: P/N 6749115-428

LINE ITEM 00013 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310006856779

NUT,SELF-LOCKING,EXTENDED WASHER,DOUBLE HEXAGON

SOURCE CONTROL DATA

ROLLS-ROYCE CORP.(63005)

P/N 6856612

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6856612

SPS TECHNOLOGIES, LLC DBA 56878 P/N A29185-3

IAW BASIC DRAWING NR 63005 6856612

REVISION NR DTD 09/21/2006

PART PIECE NUMBER: DWG P/N 6856612

LINE ITEM 00014 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5306007012367

BOLT, MACHINE

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:CS001

VALLEY-TODECO, INC. DBA ALCOA 06710 P/N 6846196-17

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6846196-17

MORTON GRINDING, INC. DBA MORTON 2T498 P/N 6846196-17

J.W. MANUFACTURING, INC DBA VAN 23899 P/N 6846196-17

GENERAL MOTORS CORP 24617 P/N 6846196-17

IAW REFERENCE DRAWING NR 73342 6846196

REVISION NR DTD 09/26/1963

PART PIECE NUMBER: DWG P/N 6846196-17

IAW REFERENCE QAP 14153 QAP-007012367

REVISION NR DTD 05/30/2012

LINE ITEM 00015 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310007021865

ROLLS ROYCE CORP 63005

P/N 6846184-428

REFERENCE NUMBER:ZD025

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

ALCOA GLOBAL FASTENERS, INC. DBA 92215 P/N VN1477-W-048

GENERAL MOTORS CORP 24617 P/N 6846184-428

BRISTOL INDUSTRIES DBA 27238 P/N BH00660-4

IAW BASIC DRAWING NR 63005 6846184

REVISION NR J DTD 07/20/2004

PART PIECE NUMBER: P/N 6846184-428

LINE ITEM 00016 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310007208554

NUT,SELF-LOCKING,HEXAGON

ROLLS ROYCE CORP 63005

P/N 6749114-1032

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N 6749114-1032

REPUBLIC FASTENER MFG. CORP. Use 71087 P/N 6749114-1032 REPUBLIC FASTENER MFG. CORP. Use 71087 P/N JL8S 1032B

ALLISON TRANSMISSION, INC. DBA 73342 P/N 6749114-1032

IAW BASIC DRAWING NR 63005 6749114

REVISION NR V DTD 10/01/1999

PART PIECE NUMBER: DWG P/N 6749114-1032

LINE ITEM 00017 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:005

NSN:5330007582965

SEAL, RING

ROLLS ROYCE CORP 63005

P/N 6858279

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:IS026

SARGENT AEROSPACE & DEFENSE, LLC 71687 P/N AAD-14132

KAYDON RING & SEAL, INC. DBA KAYDON 75370 P/N 54140

IAW BASIC DRAWING NR 63005 6858279

REVISION NR D DTD 01/21/2004

LINE ITEM 00018 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:5310008006994

NUT SELF-LOCKING EXTENDED WASHER DOUBLE HEXAGON

REFERENCE NUMBER:ISC01

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:ZD025

CRITICAL APPLICATION ITEM

REPUBLIC FASTENER MFG. CORP DBA 52828 P/N SL3C-428

SPS TECHNOLOGIES, LLC DBA 56878 P/N E0104-428

IAW BASIC DRAWING NR 63005 6749294

REVISION NR T DTD 10/05/2006

PART PIECE NUMBER: DWG P/N 6749294-428

IAW REFERENCE QAP 14153 008006994-QAP

REVISION NR DTD 03/18/2014

LINE ITEM 00019 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310008553072

NUT, SELF LOCKING, HEXAGON

SOURCE CONTROL

ROLLS ROYCE CORP 63005

P/N 6825400-1414

APPROVED SOURCE

S P S TECHNOLOGIES (56878)

REFERENCE NUMBER:IVC01

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6825400-1414

SPS TECHNOLOGIES, LLC DBA 56878 P/N 56623-1414

GENERAL MOTORS CORP 24617 P/N 6825400-1414

IAW BASIC DRAWING NR 73342 6825400

REVISION NR E DTD 12/17/1964

PART PIECE NUMBER: P/N 6825400-1414

LINE ITEM 00020 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5330008841344

GASKET

ROLLS ROYCE CORP 63005

P/N 6855500

REFERENCE NUMBER:IS026

REFERENCE NUMBER:ZDP01

CRITICAL APPLICATION ITEM

FALLS FILTRATION TECHNOLOGIES, 00736 P/N 02W929-06

IAW BASIC DRAWING NR 73342 6855500

REVISION NR DTD 09/27/1965

PART PIECE NUMBER: 6855500

LINE ITEM 00021 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:5315008967156

KEY, PILOTING

ROLLS ROYCE CORP 63005

P/N 6793711

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:IS083

CRITICAL APPLICATION ITEM

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6793711

GENERAL MOTORS CORP 24617 P/N 6793711

LINE ITEM 00022 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310009066162

WASHER, KEY

ROLLS ROYCE CORP 63005

P/N 6849498

REFERENCE NUMBER:IS076

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6849498

GLOBAL AIR INC. 08762 P/N 6849498

MILLENNIUM MANUFACTURING CORP 09YN3 P/N 6849498

IAW REFERENCE DRAWING NR 63005 EIS1169

REVISION NR AC DTD 06/01/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 73342 EIS1030

REVISION NR E DTD 08/29/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 63005 EPS259

REVISION NR H DTD 02/28/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 63005 6849498

REVISION NR B DTD 04/29/2008

PART PIECE NUMBER: DWG P/N 6849498

IAW REFERENCE DRAWING NR 63005 EDT500

REVISION NR 12 DTD 07/21/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 73342 EIS900

REVISION NR A DTD 03/21/1956

LINE ITEM 00023 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310009353554

NUT ASSEMBLY,SELF-LOCKING,GANG CHANNEL

SOURCE CONTROL DATA

ROLLS ROYCE CORP (63005)

INDIANAPOLIS, IN

P/N 6855529

REFERENCE NUMBER:IS031

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IA061

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC DBA 80539 P/N NS102940-4

IAW BASIC DRAWING NR 63005 6855529

REVISION NR G DTD 01/21/1992

PART PIECE NUMBER: P/N 6855529

LINE ITEM 00024 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310009409529

NUT,SELF-LOCKING,EXTENDED WASHER,HEXAGON

ROLLS ROYCE CORP (63005)

INDIANAPOLIS, IN

P/N 23005070

SPS TECHNOLOGIES, LLC DBA 56878 P/N 68563N8

IAW BASIC DRAWING NR 63005 23005070

REVISION NR B DTD 01/23/1988

PART PIECE NUMBER: 23005070

LINE ITEM 00025 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310009484014

SOURCE CONTROL DATA

ROLLS-ROYCE CORP (63005)

P/N 6828826-720

REFERENCE NUMBER:ZD001

SPS TECHNOLOGIES, LLC DBA 56878 P/N 57572-720

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

REVISION NR DTD 03/07/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 63005 6828826

REVISION NR D DTD 05/22/1995

PART PIECE NUMBER: DWG P/N 6828826-720

LINE ITEM 00026 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5310013228737

NUT,SELF-LOCKING,EXTENDED WASHER,HEXAGON

ROLLS ROYCE CORP 63005

P/N 23009249

63005 23009249 REVISION F DTD 12 NOV 2001

REFERENCE NUMBER:ZD001

IDENTIFY TO:

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS031

REFERENCE NUMBER:IS032

REFERENCE NUMBER:IS003

CRITICAL APPLICATION ITEM

VALLEY-TODECO, INC. DBA ALCOA 06710 P/N 23009249

VALLEY-TODECO, INC. DBA ALCOA 06710 P/N VCV0011

BRISTOL INDUSTRIES DBA 27238 P/N 23009249

BRISTOL INDUSTRIES DBA 27238 P/N BH00784-4

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

LINE ITEM 00027 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:5330014231506

GASKET, IGNITER PLUG MOUNTING

ROLLS ROYCE CORP 63005

P/N 6724494 NON-ASBESTOS

REFERENCE NUMBER:ZD074

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZDP01

CORE MATERIAL TO BE EITHER HH-G-101 TYPE 3<(>,<)>

PARMITE PAF200 OR QUIN-T E3256.

REFERENCE NUMBER:IS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IS033

REFERENCE NUMBER:IS083

REFERENCE NUMBER:IS032

CRITICAL APPLICATION ITEM

ROLLS-ROYCE CORPORATION DBA 63005 P/N 6724494 NON-ASBESTOS

PARKER-HANNIFIN, CORPORATION DBA 83259 P/N 3187046

LINE ITEM 00028 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:5306014556485

BOLT MACHINE

INCLUDE IS001 OBJECT TEXT ID ST

REFERENCE NUMBER:IPE03

REFERENCE NUMBER:ZE002

CRITICAL APPLICATION ITEM

ROLLS-ROYCE CORPORATION DBA 63005 P/N 23033591

M.S. AEROSPACE INC. 0UCY9 P/N 23033591

ACUFAST AIRCRAFT PRODUCTS INC. 4GP55 P/N 23033591

LINE ITEM 00029 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER IS031

THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF

THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING

OFFERORS NOT CITED AS APPROVED SOURCES IN THE

PURCHASE ORDER TEXT ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF

THE SOURCE APPROVAL REQUEST, TECHNICAL DATA

PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST

ALSO BE SUBMITTED TO DLA WITH THE OFFER.

REFERENCE NUMBER IS001

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER IS083

WHEN THE PURCHASE ORDER TEXT (POT)

DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND

PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES

AND PART NUMBERS OF A NUMBER OF SPECIFIC

ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)

OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY

ADDITIONAL REQUIREMENTS SET FORTH IN THE POT

ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED

TO MEET THE NEEDS OF THE GOVERNMENT AND ARE

ACCEPTABLE. SUCH PRODUCT(S) ARE EXACT

PRODUCT(S) AS DEFINED IN DLAD 52.217-9002,

CONDITIONS FOR EVALUATION AND ACCEPTANCE OF

OFFERS FOR PART NUMBERED ITEMS.

A VENDOR OFFER/QUOTATION, BID WITHOUT

EXCEPTION, IS A CERTIFICATION THAT THE EXACT

PRODUCT, MANUFACTURED AND/OR SUPPLIED BY ONE

OF THE ENTITIES CITED IN THE POT WILL BE

FURNISHED UNDER THE CONTRACT OR ORDER. ANY

PRODUCT NOT MANUFACTURED AND/OR SUPPLIED

BY ONE OF THE ENTITIES CITED IN THE POT

IS AN ALTERNATE PRODUCT, EVEN THOUGH IT

MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE

DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE

ENTITIES CITED IN THE POT.

IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A

CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE

ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED

SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES

IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO

THE GOVERNMENT.

REFERENCE NUMBER IS032

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

REFERENCE NUMBER IA061

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER ZD001

THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE

MANUFACTURED AND TESTED IN ACCORDANCE WITH THE

CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN-

NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO

HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE-

ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.

SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS

CONSIDERING SOURCE APPROVAL.

REFERENCE NUMBER ISC01

SOURCE CONTROL

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY

CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

REFERENCE NUMBER IS033

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

DATA PACKAGES MUST BE SUBMITTED TO DLA WITH

THE OFFER.

REFERENCE NUMBER ZD080

SAMPLING:

IF THE APPLICABLE (OEM OR MILITARY) DRAWING, SPECIFICATION, STANDARD, OR

QUALITY ASSURANCE PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY LEVEL

(AQL), IT MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE. HOWEVER

THE SAMPLING ACCEPTANCE NUMBER SHALL BE REDUCED TO ZERO (0). EVEN THOUGH

THE ACCEPTANCE LEVEL IS ELIMINATED, THE SAMPLE SIZE REMAINS THE SAME.

UNLESS OTHERWISE SPECIFIED IN THE OEM OR MILITARY DRAWING,

SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISIONS (QAPs)

CHARACTERISTICS CLASSIFIED AS CRITICAL, MAJOR AND MINOR SHALL HAVE AN

ASSIGNED AQL OF 0.10, 1.0, AND 4.0 RESPECTIVELY. ASQ H1331 TABLE 1 OR

MIL-STD-1916 SHALL TAKE PRECEDENCE OVER MIL-STD-105 AND ASQ Z1.4. THESE

PLANS ACCEPT ON ZERO DEFECTS AND REJECT THE ENTIRE LOT ON ONE DEFECT. A

ZERO BASED SAMPLING PLAN SHALL BE USED, UNLESS OTHERWISE SPECIFIED BY

CONTRACT.

REFERENCE NUMBER IPE03

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

REFERENCE NUMBER IP026

PACKAGING CODE ZZ/EACH FASTENER SHALL HAVE THE

ENTIRE LENGTH OF THE SHANK AND THREADS PROTECTED

BY A WRAP OR SLEEVE.

REFERENCE NUMBER ZDP01

FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS

THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN

MILITARY SALES (FMS) AND STOCK SHIPMENTS.

REFERENCE NUMBER IS026

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

REFERENCE NUMBER IVC01

VENDOR ITEM CONTROL

REFERENCE NUMBER IS076

DRAWING CITED IS SUBJECT TO EXPORT-CONTROL

REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE

CONTRACTORS QUALIFIED TO RECEIVE RESTRICTED

DRAWINGS AS LISTED ON THE CERTIFIED CONTRACTORS

ACCESS LIST (CCAL).

APPLICATION MUST BE MADE ON DD FORM 2345,

"MILITARY CRITICAL TECHNICAL DATA AGREEMENT."

COPIES OF THIS FORM ARE AVAILABLE BY WRITING TO:

COMMANDER, DLA LOGISTICS INFORMATION SERVICE

ATTN: DLIS-F, FEDERAL CENTER, BATTLE CREEK, MI 49016-3412.

CONTRACTS WILL BE AWARDED ONLY TO THOSE

CONTRACTORS APPEARING ON THE CCAL PRIOR TO AN AWARD.

REFERENCE NUMBER IS003

ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO MARKING REQUIREMENTS

DEFINED BY TECHNICAL DATA, THE MANUFACTURER'S SYMBOL IS REQUIRED AND

SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM. THE

MANUFACTURER'S SYMBOL MUST BE LISTED IN MIL-HDBK-57. DO NOT PLACE ANY

MARKINGS ON BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT REQUIRED ON

FASTENERS WITH A THREAD DIAMETER OF 0.190 INCHES AND SMALLER.

FOR MANUFACTURER'S SYMBOL REGISTRATION INFORMATION AND INQUIRIES PLEASE

VISIT THE MIL-HDBK-57 URL AT:

http://www.troopsupport.dla.mil/Hardware/Technical/logoreg.asp

REFERENCE NUMBER ZE002

Quality conformance inspection requirements shall be in accordance with clause 52.246-9064.