PID_&_Packaging_Info_-_RollsRoyce_2nd_Round_of_ADDS.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 5310-00-022-7831

WASHER CUP

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS033

REFERENCE NUMBER: IS032

ROLLS-ROYCE CORP (63005)

P/N 6829920

CRITICAL APPLICATION ITEM

SPACE AGE ENGINEERING INC 29953 P/N 6829920

Rolls-Royce Corporation DBA 63005 P/N 6829920 MD3 Industries, Ltd. DBA Empire 5V179 P/N 6829920

GENERAL MOTORS CORP 24617 P/N 6829920

PENN CIGAR MACHINES, INC. 7U218 P/N 6829920

IAW REFERENCE DRAWING NR 73342 6829920

REVISION NR A DTD 03/05/1994

PART PIECE NUMBER: 6829920

PREP FOR DELIVERY

LINE ITEM 00037 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 025

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5306-00-058-6554

BOLT, EXTERNALLY RELIEVED BODY

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

REFERENCE NUMBER: A0003

REFERENCE NUMBER: ZD080

REFERENCE NUMBER: CS001

CRITICAL APPLICATION ITEM

Rolls-Royce Corporation DBA 63005 P/N 6840383-16

PREP FOR DELIVERY

LINE ITEM 00038 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5306-00-058-6688

BOLT, EXTERNALLY RELIEVED BODY

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

CRITICAL APPLICATION ITEM

Rolls-Royce Corporation DBA 63005 P/N 6841662-15

PREP FOR DELIVERY

LINE ITEM 00039 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 050

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5310-00-106-8861

NUT, SELF-LOCKING, EXTENDED WASHER

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

REFERENCE NUMBER: ISC01

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS031

REFERENCE NUMBER: IS032

ROLLS ROYCE CORP (63005)

P/N 6828831-428

CRITICAL APPLICATION ITEM

SPS TECHNOLOGIES, LLC DBA 56878 P/N 57571-428

IAW BASIC DRAWING NR 73342 6828831

REVISION NR E DTD 09/22/1967

PART PIECE NUMBER: 6828831-428

PREP FOR DELIVERY

LINE ITEM 00040 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5310-00-558-7456

NUT, SELF-LOCKING, HEXAGON

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

REFERENCE NUMBER: ISC01

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS031

REFERENCE NUMBER: IS032

REFERENCE NUMBER: CS001

63005 6746975 REVISION "U" DTD 3 SEPT 2007

ROLLS-ROYCE MARINE NORTH AMERICA INC (38ZC7)

P/N 6746975

CRITICAL APPLICATION ITEM

KLINCHER LOCKNUT CORP 85639 P/N F5K1032-2

GAPCO INC 50761 P/N JL1032

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

REVISION NR DTD 03/07/2007

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00041 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5360-00-570-2898

SPRING, HELICAL, COMPRESSION

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ011

CRITICAL APPLICATION ITEM

Rolls-Royce Corporation DBA 63005 P/N 6811397

GENERAL MOTORS CORP 24617 P/N 6811397

PREP FOR DELIVERY

LINE ITEM 00042 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 005

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN: 5306-00-883-3863

BOLT, MACHINE

REFERENCE NUMBER: RA001

REFERENCE NUMBER: RP001

REFERENCE NUMBER: RQ006

REFERENCE NUMBER: RQ009

REFERENCE NUMBER: RQ011

REFERENCE NUMBER: ZD080

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS033

REFERENCE NUMBER: IS032

ROLLS ROYCE CORP (63005)

P/N 6823468

CRITICAL APPLICATION ITEM

Rolls-Royce Corporation DBA 63005 P/N 6823468

GENERAL MOTORS CORP 24617 P/N 6823468

PREP FOR DELIVERY

LINE ITEM 00043 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP: 100

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

• All Section “D” Packaging and Marking Clauses take precedence over ASTM D3951.

• In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

• The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER IS001

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER IS033

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS OF THE CURRENT REVISION OF THE OEM DRAWING OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL DATA PACKAGES MUST BE SUBMITTED TO DLA WITH THE OFFER.

REFERENCE NUMBER IS032

DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM

2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER

DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25.

REFERENCE NUMBER IP026

PACKAGING CODE ZZ/EACH FASTENER SHALL HAVE THE ENTIRE LENGTH OF THE SHANK AND THREADS PROTECTED BY A WRAP OR SLEEVE.

REFERENCE NUMBER ISC01

SOURCE CONTROL

REFERENCE NUMBER IS031

THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING OFFERORS NOT CITED AS APPROVED SOURCES IN THE PURCHASE ORDER TEXT ARE REQUIRED TO OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF THE SOURCE APPROVAL REQUEST, TECHNICAL DATA PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST ALSO BE SUBMITTED TO DLA WITH THE OFFER.

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN