SPE4A727T4667.pdf

PDF 455 KB Posted

Attached to
DOOR, AIRCRAFT AND 1 MORE ITEM
Solicitation number
SPE4A727T4667
Issued by

About this file

This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Weapons Support for aircraft door components. The solicitation SPE4A7-27-T-4667 was issued on November 20, 2026, with a closing date of November 27, 2026. The requirement is for one (1) aircraft door (NSN 1560015261204) to be delivered within 927 calendar days from contract award to DLA Distribution San Joaquin in Tracy, California, with FOB Origin pricing. A separate First Article Test (FAT) line item requires delivery of two units within 204 calendar days to Warner Robins Air Logistics Complex in Georgia, with the Government conducting testing and providing approval/conditional approval/disapproval within 120 days of receipt.

The procurement is not a small business set-aside and falls under NAICS code 336413. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions (Revision 106, November 3, 2026) and includes extensive technical, quality, and export-control requirements, including SAE AS9003 or ISO 9001 certification for the manufacturer's inspection system, CMMC Level 2 certification, and compliance with ITAR/EAR export controls due to the item's technical data classification. The aircraft door is a critical application item requiring compliance with stable base drawing procedures, MIL-STD-1916 sampling methods, and packaging per DLA specifications. Origin inspection and First Destination Transportation provisions apply. The procurement history indicates prior awards at $122,000 (2026) and $95,000 per unit (2019).

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A7-27-T-4667

2. DATE ISSUED

2026 NOV 20

3. REQUISITION/PURCHASE REQUEST NO.

7019242070

RATING

DO-C9

DLA WEAPONS SUPPORT

ASC SUPPLIER OPER AE AND AF DIV

6090 STRATHMORE ROAD

RICHMOND VA 23237

USA

Name: Amber Wells Buyer Code:DAW0135 Tel: 445-737-7014 Email: Amber.Wells@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 27

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 106 (NOVEMBER 3, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision11-3-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 28

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 28 PAGES

SPE4A7-27-T-4667

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

FAR 52.219-6 Notice of Total Small Business Set-Aside

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

PAGE 3 OF 28 PAGES

SPE4A7-27-T-4667

SECTION A

THE MANUFACTURERS INSPECTION SYSTEM AT A MINIMUM MUST COMPLY WITH SAE

AS9003 OR ISO 9001 TAILORED TO THE REQUIREMENTS OF SAE AS9003. IF THE

STANDARD THAT APPLIES TO YOUR COMPANY IS NOT AVAILABLE ON DIBBS AS A

SELECTION, THEN SELECT “OTHER” THEN SPECIFY WHAT “OTHER EQUIVALENT”

STANDARD APPLIES.

Fast Pay does not apply to this solicitation

FIRST ARTICLE APPROVAL – GOVERNMENT TESTING REQUIRED (FAR 52.209-4 AND

ALT I)

THE CONTRACTOR SHALL DELIVER 2 UNIT(S) OF

LOT/ITEM 1560 / 15261204

WITHIN 204 CALENDAR DAYS FROM THE DATE OF

THIS CONTRACT TO THE GOVERNMENT AT THE LOCATION SPECIFIED BELOW FOR

FIRST ARTICLE TESTS.

FD2060

WARNER ROBINS ALCMC

ATTN: FIRST ARTICLE - DO NOT POST

450 THIRD STREET

ROBINS AFB

GA

31098-1887 INSPECTION REPORTS:402 MXSG/MXRILM ATTN: FIRST ARTICLE TEST LAB 450 THIRD ST. BLDG 323, ROBINS AFB, GA.

31098-1640

WITHIN 120 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE.

DISPOSITION OF FAT UNITS IAW PARAGRAPH (e) OF FAR 52.209-3 OR 52.209-4.

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, PAGE 4 OF 28 PAGES

SPE4A7-27-T-4667

SECTION A

please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are

PAGE 5 OF 28 PAGES

SPE4A7-27-T-4667

SECTION A

required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

PAGE 6 OF 28 PAGES

SECTION A

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

For general questions about technical issues prior to solicitation due date, you may contact Tommie Graham at Tommie.Graham@dla.mil or by phone at 804-279- 3519. Please note that responsibility for the quote or offer, including technical compliance with the solicitation, reside with the offeror.

Procurement History for NSN/FSC:015261204/1560

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

1HC54 SPE4A726P9313P00001 2.000 122000.00000 20260415 N

91750 SPE4A719C0192P00006 3.000 95000.00000 20190226 N

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 7 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

PR: 7019242070

NSN/MATERIAL:1560015261204

ITEM DESCRIPTION

DOOR,AIRCRAFT

DOOR, AIRCRAFT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

RT001: MEASURING AND TEST EQUIPMENT

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RD002, COVERED DEFENSE INFORMATION APPLIES

PAGE 8 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE

TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN

THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR

HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),

THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM

DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON

STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS

OF THE UNDIMENSIONED DRAWING.

THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR

DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE

DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE

INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND

(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)

0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH

DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO

WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.

REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED

TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

ENGINEERING NOTES & EXCEPTION:

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

FOR GENERAL ENGINEERING DOCUMENT NOTES, SEE DOCUMENT NUMBER

200415485.SPARES CONFIGURATION: PER B/P EXCEPT 1/4 EXCESS TRIM ON ALL

SIDES, BAG AND ATTACH TO ASSEMBLY AS LOOSE PARTS: (1) 68A411400-2042

DOUBLER AND (1) 68A411400-2043 SEAL.FINISH: FINISH PER B/P. THIS IS AN

EXTERIOR PART AND IS NOT FUEL WETTED.

DWG: 68A411400 AND EO; (-1010) CONFIGURATION / EO 2009C0001-R AND DCNF

APPLY

DWG: 68A411400(PL); PARTS LIST

DWG: 68A900000 AND EO; EO 2015C0002-R APPLIES.

DWG: PS20022 AND EO; EO 2008C0001-R APPLIES.

DWG: PS15535; (SUPERSEDED) USE PS15500.5.

DWG: PS15500.5; USE IN LIEU OF PS15535

DWG: PS15534; (SUPERSEDED) USE PS15500.4.

DWG: PS15500.4; USE IN LIEU OF PS15534

DWG: MMS420 AND ADDENDUM; ADDENDUM 1, REVISION AW, APPLIES.

DWG: PS15548; (SUPERSEDED) USE PS15500.8.

DWG: PS15500.8; USE IN LIEU OF PS15548

DWG: 40M129; NOT REQUIRED.

DWG: 68A411401; -2003

DWG: 1MA10151; C/O 68A411401

DWG: PS21202; C/O 68A411401

DWG: 68A411402; -2007

DWG: 68A411403; -2001, -2003 AND -2005

DWG: 68A411407; 2005

DWG: 68A890240 AND EO; -2001 AND -2003 EO SEQUENCE 1 AND 2 APPLY.

DWG: 200415485; NOTES 1, 3, 10, 11 AND 12 APPLY.

PAGE 9 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

NOTE: A STABLE BASE DRAWING FORMS A PART OF

THE DATA PACKAGE REQUIRED FOR PERFORMANCE AND

AS SUCH WILL BE FORWARDED TO THE SUCCESSFUL

OFFEROR WITHIN 30 DAYS AFTER AWARD OF THE

CONTRACT.

IF THE STABLE BASE DRAWING HAS NOT BEEN

RECEIVED WITHIN 30 DAYS AFTER AWARD, NOTIFY THE

PROCUREMENT CONTRACTING OFFICER.

SPECIAL INSTRUCTIONS:

WHEN THE USE OF STABLE BASE DRAWINGS ARE

REQUIRED, THE FOLLOWING SHALL APPLY:

A: STABILIZE BY ALLOWING THE STABLE BASE

DRAWING TO REST FLAT AND UNRESTRAINED ON A FLAT

SURFACE OVERNIGHT AT ROOM TEMPERATURE PRIOR TO

USE.

B. DO NOT STRETCH OR OTHERWISE APPLY STRESS.

C. CHECK THE DIMENSIONAL ACCURACY OF THE GRID

LINES. THE DIMENSION BETWEEN ADJACENT GRID

LINES MUST BE WITHIN (+,-) 0.005 INCHES. THE

GRID LINES SHALL BE MEASURED VERTICALLY,

HORIZONTALLY AND DIAGONALLY, TO INSURE THAT THE

GRIDS ARE WITHIN THE TOLERANCE OF (+,-) 0.005

INCHES. THE TOLERANCE IS ACCUMULATED OVER THE

LENGTH AND WIDTH OF THE STABLE BASE DRAWING.

D. TRAMMEL POINTS SHALL BE MEASURED TO WITHIN

CENTERLINE 0.010.

E. WHEN ROLLING STABLE BASE DRAWINGS, DO NOT

ROLL LESS THAN 3 INCHES IN DIAMETER.

F. IF THE ABOVE TOLERANCE POINTS PROVE TO BE

INACCURATE, RECORD THE DISCREPANCIES

IMMEDIATELY AND NOTIFY IN WRITING THE

ADMINISTRATIVE CONTRACTING OFFICER (ACO).

G. THE CONTRACTOR WILL BE ADVISED AT TIME OF

ISSUANCE OF THE STABLE BASE DRAWING WHEN ITS

RETURN IS REQUIRED. WHEN SO ADVISED, THE

CONTRACTOR WILL:

(1) RETURN THE STABLE BASE DRAWING (IF IT

HAS NOT BEEN DAMAGED/DESTROYED IN THE

MANUFACTURING PROCESS) BY TRACEABLE MEANS TO:

DLA AVIATION

ATTN: DLA AVIATION-VAAA (MYLAR SECTION)

RICHMOND, VA 23297-5615

(2) CERTIFY TO THE ACO OR QUALITY ASSURANCE

REPRESENTATIVE (QAR) THAT THE STABLE BASE

DRAWING HAS EITHER BEEN RETURNED TO DSCR OR WAS

DAMAGED/DESTROYED DURING MANUFACTURE.

CERTIFICATION SHOULD REFERENCE THE CONTRACT

NUMBER, DRAWING NUMBER AND SHEET.

NOTE: Please be advised and advise the contractor that they SHOULD NOT return Mylars to DSCR upon completion of the contract.

CRITICAL APPLICATION ITEM

TDP Rev A Gen 1

IAW BASIC DRAWING NR 76301 68A411400

REVISION NR F DTD 07/06/2021

PART PIECE NUMBER: 68A411400-1010

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A900029

REVISION NR R DTD 03/09/2021

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A900029

REVISION NR R DTD 03/28/2023

PART PIECE NUMBER:

TDP Rev A Gen 1

PAGE 10 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 6M51

REVISION NR T DTD 10/26/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 11M951

REVISION NR A DTD 11/16/1971

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 40M114

REVISION NR N DTD 08/12/2016

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS159

REVISION NR N DTD 03/26/2001

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.11002

REVISION NR T DTD 03/07/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.15500

REVISION NR W DTD 04/06/1994

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.15500.4

REVISION NR A DTD 07/08/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS15500.8

REVISION NR A DTD 06/29/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS21202

REVISION NR AR DTD 09/12/2013

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411407

REVISION NR A DTD 09/10/1973

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411407

REVISION NR A DTD 10/23/1973

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR M DTD 03/07/2020

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 6M39

REVISION NR AA DTD 06/19/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A329998

REVISION NR H DTD 04/30/2009

PAGE 11 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 6M148

REVISION NR H DTD 06/29/2005

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.14032

REVISION NR P DTD 10/20/2000

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS15500

REVISION NR W DTD 07/30/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS20022

REVISION NR M DTD 04/21/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 ST4M157

REVISION NR F DTD 04/28/1994

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS15500.5

REVISION NR A DTD 07/08/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.18015

REVISION NR D DTD 06/09/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.21201

REVISION NR T DTD 06/18/2010

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.13101

REVISION NR V3 DTD 03/20/1991

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 ST9M514

REVISION NR F DTD 07/28/1997

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A890240

REVISION NR D DTD 07/17/1997

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 1MA10237

REVISION NR DTD 11/16/1972

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 1MA160

REVISION NR AM DTD 07/25/2011

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS14018

REVISION NR N DTD 11/02/2005

PAGE 12 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 MMS420

REVISION NR AT DTD 02/24/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.13508

REVISION NR M DTD 07/24/2002

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411500

REVISION NR H DTD 06/20/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411500

REVISION NR H DTD 08/28/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411409

REVISION NR B DTD 12/04/1995

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 ST3M733

REVISION NR R DTD 11/10/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 29M100

REVISION NR D DTD 09/01/1982

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 ST3M404

REVISION NR T DTD 06/23/1995

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.19000

REVISION NR W DTD 01/23/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 3M189

REVISION NR E DTD 12/02/1994

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.13201

REVISION NR AJ DTD 01/22/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 ST3M714

REVISION NR J DTD 11/02/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411400

REVISION NR F DTD 08/27/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411401

REVISION NR A DTD 02/24/1981

PAGE 13 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 68A411401

REVISION NR A DTD 06/09/1981

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411402

REVISION NR A DTD 09/12/1973

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411402

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411403

REVISION NR B DTD 10/29/1986

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411403

REVISION NR B DTD 02/02/1987

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411409

REVISION NR B DTD 04/03/1997

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411412

REVISION NR A DTD 06/05/1981

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411412

REVISION NR A DTD 07/13/1981

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411413

REVISION NR A DTD 02/25/1980

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411413

REVISION NR A DTD 06/18/1981

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A890240

REVISION NR D DTD 08/25/2016

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A890240

REVISION NR DTD 09/26/1973

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 6M91

REVISION NR E DTD 02/05/1992

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS11344

REVISION NR T DTD 07/20/2009

PAGE 14 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 PS13646

REVISION NR AF DTD 12/11/1991

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.17004

REVISION NR Y DTD 07/16/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.20018

REVISION NR F DTD 08/15/2003

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 23M112

REVISION NR BE DTD 04/13/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.13646

REVISION NR AF DTD 06/12/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS23041

REVISION NR V DTD 02/24/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS23041

REVISION NR V1 DTD 06/05/1992

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS20006

REVISION NR R DTD 02/06/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS16001

REVISION NR CG DTD 08/10/2023

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 23M119

REVISION NR R DTD 07/12/1999

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 04/21/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.17004

REVISION NR Y1 DTD 11/07/1994

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411411

REVISION NR A DTD 12/21/1972

PAGE 15 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 P.S.21202

REVISION NR AR DTD 09/23/1990

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 PS16002

REVISION NR AL DTD 03/08/2011

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.19402

REVISION NR AK DTD 10/06/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR M DTD 02/16/2022

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 01/29/2024

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.13101

REVISION NR V DTD 03/26/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS901

REVISION NR G DTD 04/04/2005

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.17169

REVISION NR AR DTD 08/04/2022

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS332

REVISION NR P DTD 05/08/2006

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 6M91

REVISION NR E DTD 01/05/2012

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS-1410

REVISION NR DTD 06/09/1971

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.11002

REVISION NR T DTD 06/06/1991

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS332

REVISION NR P DTD 02/09/2001

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 P.S.22010

REVISION NR E DTD 03/03/1997

PAGE 16 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

IAW REFERENCE DRAWING NR 76301 1MA140

REVISION NR L DTD 07/10/2001

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411400

REVISION NR F DTD 07/09/2007

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411400-1010

REVISION NR B DTD 01/01/1939

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411400/1

REVISION NR E DTD 12/11/1980

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411400/2

REVISION NR E DTD 12/11/1980

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 MMS420

REVISION NR P DTD 11/17/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411403

REVISION NR B DTD 10/29/1986

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411500/1

REVISION NR G DTD 04/24/2003

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 1MA10151

REVISION NR DTD 01/18/1971

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411411

REVISION NR A DTD 11/17/1972

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 76301 68A411500

REVISION NR H DTD 01/14/1976

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7019242070 0001 EA 1.000

PAGE 17 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

PR: 7019242070 PRLI: 0001 CONT’D

NSN/MATERIAL:1560015261204

DELIVERY (IN DAYS):0927

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN RD

REC WHSE 57

TRACY CA 95304-5000

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

25600 S CHRISMAN RD REC WHSE 57

TRACY CA 95304-5000

US

Need Ship Date:07/23/2028 Original Required Delivery Date:07/23/2028

GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

PAGE 18 OF 28 PAGES

SPE4A7-27-T-4667

SECTION B

PR: PRLI: CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000052

DELIVERY (IN DAYS):0204

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 28 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 28 PAGES

SPE4A7-27-T-4667

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 28 PAGES

SPE4A7-27-T-4667

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if applicable

Ship From Code See Resulting Award if applicable

Mark For Code See Resulting Award if applicable

Service Approver (DoDAAC)

See Resulting Award if applicable

Service Acceptor (DoDAAC)

See Resulting Award if applicable

Accept at Other DoDAAC See Resulting Award if applicable

LPO DoDAAC See Resulting Award if applicable

DCAA Auditor DoDAAC See Resulting Award if applicable

Other DoDAAC(s) See Resulting Award if applicable

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Contact the local contract administrator found in block 6 of the DD 1155 (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7999 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (DEVIATION 2026-O0015) (FEB 2026)

(DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 28 PAGES

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) (DFARS)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA—BASIC (OCT 2024) (DFARS)

(a) Definitions. As used in this clause -- "Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

"U.S.-flag vessel" means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116.

(b) If the transportation of supplies by sea is anticipated under this contract, the Contractor shall --

(1) Notify the Contracting Officer and Maritime Administration (MARAD) at Cargo.Marad@dot.gov --

(i) Within 3 business days after contract award; or

(ii) Immediately prior to the shipment departure date necessary to meet delivery schedules, whichever is earlier; and

(2) Include in the notification --

(i) A statement of the Contractor's intent to transport supplies by sea;

(ii) The contract number; and

(iii) The task-order or delivery-order number, when applicable.

(c)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that -- (1)The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b. destination shipment);

(2)Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or (3)Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(d) The Contractor and its subcontractors may request, via the Contracting Officer, a waiver of the requirement to use a U.S.-flag vessel, or identification of any available U.S.-flag vessels, if the Contractor or a subcontractor sufficiently explains that --

(1) U.S.-flag vessels are not available at a fair and reasonable rate for commercial vessels of the United States; or

(2) U.S.-flag vessels are otherwise not available.

(e) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, however, if a DoD waiver is not approved prior to the shipper's sailing date, this will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date(s) and required delivery date(s);

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of current, diligent efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of quotes will suffice for this purpose. Copies of telephone notes, emails, and other relevant communications will otherwise be considered for this purpose.

(f) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and MARAD at Cargo.Marad@dot.gov, Attention: Military Team, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of the carrier.

(g) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief --https://www.ecfr.gov/current/title-33/section-2.24 https://www.govinfo.gov/link/uscode/46/116 mailto:Cargo.Marad@dot.gov mailto:Cargo.Marad@dot.gov

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 23 OF 28 PAGES

SPE4A7-27-T-4667

SECTION I - CONTRACT CLAUSES (CONTINUED)

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had received a prior-approved waiver for U.S.-flag vessels for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of DoD. The Contractor shall describe these shipments in the following format:

ITEM DESCRIPTION CONTRACT LINE ITEMS QUANTITY

TOTAL

(h) If this contract exceeds the simplified acquisition…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .