SPE4A727Q0231.pdf

PDF 180 KB Posted

Attached to
SUPPORT, STRUCTURAL CO AND 1 MORE ITEM
Solicitation number
SPE4A727Q0231
Issued by

About this file

This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Aviation for the procurement of structural aircraft support components. The solicitation number is SPE4A7-27-Q-0231, issued on November 17, 2026, with quotations due by December 1, 2026.

The requirement is for 4 units of National Stock Number (NSN) 1560-01-207-8735, described as a support structural component for aircraft, manufactured through a forging process. This is a critical application item with technical data subject to export control under ITAR and EAR regulations. Offerors and their suppliers must have approved US/Canada Joint Certification Program (JCP) certification and DLA authorization to access export-controlled data. The solicitation requires CMMC Level 2 certification and specifies delivery of 1 unit for Government First Article Testing (FAT) within 90 days, followed by 236 days for delivery of the final production quantity of 4 units (416 total days). The final delivery destination is DTW400 (Parts-Attach General Depot) in Tainan City, Taiwan. Pricing is firm fixed price with inspection and acceptance at origin. The solicitation includes higher-level quality requirements per SAE AS9100 and mandates compliance with MIL-STD-1916 or ASQ H1331 sampling plans. Quotations must be submitted via DIBBS or email to mahlon.marcus@dla.mil. Evaluation factors include cost/price (approximately equal importance), past performance via the Supplier Performance Risk System (SPRS), and quoted delivery compliance. The Government testing cost for FAT is estimated at $750,000.00 and will be added to the offered price for evaluation purposes.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE4A7-27-Q-0231

1. REQUEST NO.

2026 NOV 17

2. DATE ISSUED

DTW45460275550

3. REQUISITION/PURCHASE REQUEST NO.

DO-A1

RATING

DLA WEAPONS SUPPORT

ASC SUPPLIER OPER AE AND AF DIV

6090 STRATHMORE ROAD

RICHMOND VA 23237

USA

Buyer: Mahlon Marcus DMM0366 Tel: 804-310-8180 Email: MAHLON.MARCUS@DLA.MIL

SEE SCHEDULE

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 DEC 01

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 35 PAGES

SPE4A7-27-Q-0231

The following DLA Aviation Notices are incorporated by reference. The full-text of the notices can be found at:

http://www.dla.mil/Aviation/Business/IndustryResources/DLAResourcesforSuppliers/DAANs.aspx

PGN-11-01

Notification of Rejection of Award with Technical Data

PGN-13-01

Evaluation and Award for Simplified Acquisitions

(a) AWARD. The Government intends to evaluate quotations. The award will be made to the quoter whose quote conforms to the terms and conditions of the solicitation and represents the best value to the Government. Therefore, award may be made to other than the lowest priced or the highest technically rated quote.

(b) RELATIVE IMPORTANCE AND TRADE-OFFS. The Government will base the determination of best value on a comparative assessment of the quoters' prices, past performance, and the other evaluation factors identified elsewhere in this solicitation. The determination of best value also considers the relative importance of the evaluation factors. All evaluation factors, when combined, are:

[ ] significantly more important than cost or price. As other evaluation factors become more equal, the evaluated cost or price becomes more important.

[ X ] approximately equal to cost or price; or [ ] significantly less important than cost or price. As the evaluated cost/price becomes more equal, relative importance of all other evaluation factors becomes more significant.

The final award decision may involve a trade-off among cost or price and the non-price factors. Factors that may be considered in the trade-off process include, but are not limited to:

•Item criticality and weapons system application •Current inventory status •Historical delivery or quality problems •Concerns over limited supply sources and industrial base •Benefits from obtaining new sources

(c) COST OR PRICE. The Government will evaluate the quoted cost or price. The Government will add any other cost or price evaluation factors identified elsewhere in this solicitation (e.g., Buy American Act or FOB Origin transportation costs) to arrive at the quoter's evaluated cost or price. The evaluated cost or price will be used in conjunction with the other non-price factors to determine the best value to the Government.

(d) PAST PERFORMANCE. Past performance includes, but is not limited to, the quoter's record of conforming to contract requirements and standards of good workmanship; adherence to contract schedules, including the administrative aspects of performance; the quoter's reputation for reasonable and cooperative behavior and commitment to customer satisfaction; and generally, the quoter's business-like concern for the customer's interest.

(1) The Supplier Performance Risk System (SPRS) is the current term for past performance that is formerly known as Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR), as applicable, will be used to evaluate quality and past performance on DLA awards (refer to DFARS 252.213-7000 and Procurement Note L08).

(e) PAST PERFORMANCE EVALUATION FACTORS. The Government will use the past performance evaluation factors marked below in addition to cost or price and other evaluation factors specified in the solicitation. Unless indicated otherwise, past performance is significantly more important than other non-price factors. Within the past performance subfactors, SPRS assessments (as applicable) will be weighed most heavily. Historical quality history and delivery schedule compliance (not captured in SPRS) will be weighed more heavily than the remaining past performance subfactors. All other non-price evaluation factors specified in this solicitation weigh equally, unless otherwise indicated.

[ X ] SPRS Assessments (i.e., quality and delivery) [ ] Historical Quality (not captured in SPRS) [ ] Historical Delivery Schedule Compliance (not captured in SPRS) [ ] Other (specify):

PGN-13-01 (ALT I)

Evaluation and Award for Simplified Acquisitions

(a) Quoted Delivery. The Government will evaluate the quoter’s compliance with the delivery schedule specified in the solicitation. Quoting a greater number of days delivery than requested under the solicitation will result in the quote being evaluated less favorably than a quote meeting the requested delivery schedule. There will be no evaluation preference for quoted delivery which is earlier than the requested delivery schedule.

(b) Non-Price Factors. Quoted delivery and past performance will be evaluated equally, unless indicated otherwise below.

[ ] Quoted delivery is weighed more heavily than past performance.

[ ] Past Performance is weighed more heavily than quoted delivery.

PGN-13-05

Quote Submission Method

Quotes in response to this solicitation may be submitted by the following method(s) as indicated below:

___X__Upload Proposals on the DLA Internet Bid Board System (DIBBS) at: https://www.dibbs.bsm.dla.mil/default.aspx

______Buyer’s Facsimile: ______________________________

___X__Buyer’s email address: mahlon.marcus@dla.mil

Note: E-mailed RFQs must not exceed 15 MB. Proposals greater than 15 MB must be submitted using multiple emails.

PGN-13-06

All or None for Simplified Acquisitions 201909

PAGE 3 OF 35 PAGES

SPE4A7-27-Q-0231

PGN-15-02

Offer Submission Method 202205

Offers in response to this solicitation may be submitted by the following method(s) as indicated below, in accordance with FAR 15.208, Submission, Modification, Revision, and Withdrawal of Proposals:

_____ Mail to Bid Room:

_____ DLA Aviation Mail Room, Bldg. 210 Attn: Bid Custodian 6090 Strathmore Road Richmond, VA 23297

_____ Hand-carry:

_____ DLA Aviation Mail Room, Bldg. 210 Attn: Bid Custodian 6090 Strathmore Road Richmond, VA 23297

_____ Mail to Buyer:

_____ Address located in Block 8 of Standard Form 33 Attention: __David L Shumate___________

_____ Address located in Block 9 of Standard Form 1449 Attention: __David L Shumate___________

__X__ Upload Proposals on the DLA Internet Bid Board System (DIBBS) at: https://www.dibbs.bsm.dla.mil/default.aspx

_____ Facsimile: In accordance with FAR 15.203(d)

_____ Aviation Bid Custodian: (804) 279-4165

_____ Buyer’s Facsimile: ___________________________________

__X__ E-mail:

_____ Aviation Bid Custodian: DSCR.Biddesk@dla.mil

_____ Directly to buyer’s e-mail address located in Block 10C of Standard Form 33

_____ Buyer’s e-mail address: ___mahlon.marcus@dla.mil_________

Note: E-mail proposals must not exceed 15 MB. Proposals greater than 15 MB must be submitted using multiple emails.

PGN-47-01

Transportation Account Codes (TACs) for FOB Origin Vendor Shipments

PGN-47-02

Carrier Tracking Information in Wide Area Workflow (WAWF) When submitting a Material Inspection and Receiving Report (Form DD250) in Procurement Integrated Enterprise Environment (PIEE)/WAWF, DLA Aviation requests that the vendor include the applicable Transportation Control Number (TCN) and carrier shipment tracking information. Including the TCN and the carrier shipment tracking information will assist the contractor in meeting the On Time Delivery (OTD) standards for DLA Aviation and streamline the delinquency resolution process. Vendors should enter the carrier tracking number in Block 4 “B/L” field within the Form DD250. If this is not possible, the vendor should send additional tracking information that is available (i.e., carrier shipping tracking information, screen shots, proof of delivery) to the Contract Administrator.

PNG-09-01

National Stock Number (NSN) Identification of First Article Testing

PNG-09-07

Disposition Instructions for Government First Article Test Exhibit(s) after Test Completion.

PAGE 4 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION B

SUPPLIES/SERVICES: 1560-01-207-8735

ITEM DESCRIPTION:

SUPPORT,STRUCTURAL COMPONENT,AIRCRAFT

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in

PAGE 5 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION B

SUPPLY/SERVICE: 1560-01-207-8735 CONT'D

order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers

RT001: MEASURING AND TEST EQUIPMENT

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

CRITICAL APPLICATION ITEM

AERO CNC, INC 9V479 P/N 16P3181-13

LOCKHEED MARTIN CORPORATION 81755 P/N 16P3181-13

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16Z001

REVISION NR AK DTD 03/11/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16P3181

REVISION NR B DTD 08/11/1997

PART PIECE NUMBER: 16P3181-13

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16P3181ISS014

REVISION NR E DTD 02/27/1998

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16P3181ISS080

REVISION NR E DTD 12/09/2011

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR T DTD 08/13/2018

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 P6174

REVISION NR B DTD 02/14/2023

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 M001

REVISION NR AA DTD 06/05/1991

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FPS-3001

REVISION NR H DTD 03/15/2019

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 NDTS-1500

REVISION NR L DTD 10/04/2021

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 NDTS-1502

PAGE 6 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION B

SUPPLY/SERVICE: 1560-01-207-8735 CONT'D

REVISION NR N DTD 10/04/2021

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 NDTS-5101

REVISION NR A DTD 03/01/1985

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FQPL-3017

REVISION NR J DTD 11/29/1995

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FQPL-NDTS-1101

REVISION NR 28 DTD 02/13/2023

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 NDTS-1501

REVISION NR L DTD 10/04/2021

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FPS-3001

REVISION NR H DTD 02/03/2003

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FQML-3027

REVISION NR 8 DTD 03/08/2022

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 NDTS-1101

REVISION NR L DTD 10/02/2024

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16Z001

REVISION NR AK DTD 03/11/2009

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FPS-3017

REVISION NR G DTD 06/23/2020

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FMS-3027

REVISION NR C DTD 06/26/2008

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR A DTD 05/21/2003

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR B DTD 05/21/2003

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 FMS-3027

REVISION NR C DTD 10/24/1994

PART PIECE NUMBER:

PAGE 7 OF 35 PAGES

SPE4A7-27-Q-0231

SUPPLY/SERVICE: 1560-01-207-8735 CONT'D

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 81755 16P3181

REVISION NR B DTD 03/07/1997

PART PIECE NUMBER:

TDP Rev A Gen 1

IAW REFERENCE DRAWING NR 13873 EI-012078735

REVISION NR DTD 10/10/2025

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1560-01-207-8735 4.000 EA $ ________________ $ ________________

SUPPORT,STRUCTURAL

COMPONENT,AIRCRAFT

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 236 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C

UNIT CONT:D3 OPI:O

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA

PACK CODE:Q PACKING LEVEL: B

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

FREIGHT FORWARDER:

MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

DTW400

PARTS-ATTACH GENERAL DEPOT (PAGD)

AIR FORCE MAINTENANCE & SUPPORT CMD

TEL 06-3366158 EXT 973953

TAINAN CITY

TW

MARKFOR

DTW400

PAGE 8 OF 35 PAGES

SPE4A7-27-Q-0231

SUPPLY/SERVICE: 1560-01-207-8735 CONT'D

PARTS-ATTACH GENERAL DEPOT (PAGD)

AIR FORCE MAINTENANCE & SUPPORT CMD

TEL 06-3366158 EXT 973953

TAINAN CITY

TW

M/F: (TCN) DTW45460275550

RDD: A05

PROJ: TP 2

SUPP ADD: DA4SAD SIG: L

FOR GOVERNMENT USE ONLY: (IPD) 05

DIC: A31 DIST: N45 ADV: 2L FC: NL

Government First Article Test Government First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-4 for the actual quantity required to be tested.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 0001 - S00000052 1.000 EA $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

FOB: DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7015747075 0001 N/A N/A N/A 03/05/2026

0002 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (SEP 2021)

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material: Yes [ ] No [ ] If yes, the offeror purchased the material from a Government selling agency or other source. Yes [ ] No [ ] If yes, complete the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year):

(3) The material has been altered or modified. Yes [ ] No [ ] If Yes, complete the following:

Name of the company that performed the alternation or modification Address:

Complete description of the alternations or modifications:

(4) The material has been reconditioned. Yes [ ] No [ ] If Yes, complete the following:

(i) The price offered includes the cost of reconditioning/refurbishment. Yes [ ] No [ ]

(ii) Name of the company that reconditioned that material

(iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

The material contains cure-dated components. Yes [ ] No [ ] If Yes, complete the following:

(i)The price includes replacement of cure-dated components. Yes [ ] No [ ]

(ii) Cure date:

(5) The material has data plates attached. Yes [ ] No [ ] If Yes, insert all information contained on the data plate:

(6)The offered material is in its original package. Yes [ ] No [ ] If Yes, complete the following:

Contract Number:

NSN:

CAGE Code:

Part Number:

Other Markings/Data:

(7)The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ] If Yes, complete the following:

(i) The material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ]

(ii) State below the Government Agency and contract number under which the material was previously provided:

Agency:

Contract Number:

(8)The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ] If Yes, complete the following:

(i) The specification/drawing is in the possession of the offeror. Yes [ ] No [ ]

(ii) The offeror has stated the applicable information below: Yes [ ] No [ ] Specification/Drawing Number:

Revision: (if any):

Date:

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ] If Yes, complete the following:

(i) Material has been re-preserved. Yes [ ] No [ ]

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

(ii) Material has been repackaged. Yes [ ] No [ ]

(iii) Percentage of material that has been inspected is %; and/or

(iv) Number of items inspected is

(v) A written report was prepared. Yes [ ] No [ ] The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation.

(i) Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror will forward to the contracting officer one of the following, within 24 hours of request by the contracting officer to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

[ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

[ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

[ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (6) of this procurement note. Yes [ ] No [ ] .)

[ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe:

This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

C01 SUPERSEDED PART NUMBERED ITEMS (FEB 2025)

C14 CORRECTION OF NONCONFORMING PACKAGING OR MARKING (MAY 2020)

C21 SHIPPING INSTRUCTION REQUEST (SIR) (MAY 2026)

C20 VENDOR SHIPMENT MODULE (VSM) (MAY 2026)

C18 SHIPPING INSTRUCTIONS FOR EXPORT AND U.S. TERRITORIES (AUG 2017)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

C07 WARSTOPPER PROGRAM MATERIAL BUFFER AVAILABILITY (JAN 2021)

SECTION E - INSPECTION AND ACCEPTANCE

E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025)

(1) If there is not a separate contract line item number (CLIN) for FAT, the offeror shall include all costs and risk associated with completion of the FAT requirement in the production CLIN price.

(2) If there is a separate FAT CLIN, the offeror shall include all costs and risk associated with completion of the FAT requirement in the FAT CLIN price.

The unit of issue for the FAT CLIN, EACH, is equal to one First Article Test (1EA=1FAT). To receive payment for any costs associated with FAT, the offeror shall propose costs associated with FAT on a separate CLIN. The offeror shall base the production CLIN price solely on all costs associated with completion of the production units and shall exclude all FAT-related costs.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

(3) The contracting officer will use the total award price in selecting the best value offer from among all eligible offerors. However, for an offeror to be eligible for award, the contracting officer must determine that the FAT CLIN price (unless FAT is waived) and the production CLIN price are fair and reasonable; and, if set-aside under FAR Part 19, a fair market price. The offeror shall not propose a FAT CLIN price that is materially unbalanced in relation to the production CLIN price. In the event an offeror receives a waiver of the FAT requirement, the contracting officer will deduct the FAT CLIN price for the waived source in determining the total award price.

(4)(a) Notwithstanding the conditions for waiving first article, the contracting officer may order an additional first article sample, or portion thereof, in writing if there is a --

(i) Major change to the technical data;

(ii) Lapse in production for a period in excess of 90 days; or

(iii) Change in the place of performance (manufacturing facility), manufacturing process,material used, drawing, specification or source of supply.

(b) When conditions in paragraphs (4)(a)(i), (ii), or (iii) occur, the contractor shall notify the contracting officer; who will determine whether to order an additional first article sample or portion thereof and provide instructions concerning the submission, inspection, and notification of results. The contractor shall bear the costs of the additional first article testing resulting from any of the causes in paragraphs (4)(a)(i)-(iii) instituted by the contractor and not due to changes directed by the Government.

(5) Waivers. The offeror may submit a request for FAT waiver to the contracting officer, who may waive the FAT requirement when all of the following criteria apply:

(a) The offeror requesting waiver has successfully manufactured, delivered and the government accepted the item or a similar item. The offeror shall provide the following information and be prepared to provide documentary evidence upon the contracting officer's request:

(i) Contract number(s), date(s), and issuing Government agency or agencies.

(ii) Description of item previously furnished, identified by part number, type, model number and/or other identifying information. If the item previously furnished is similar but not identical to the item being acquired under the current buy, the offeror shall explain why manufacture of the item previously furnished is sufficient to demonstrate its ability to manufacture the item being acquired under the current buy without need for a first article test.

(iii) Engineering control document/change number of item previously furnished.

(b) There have been no changes to manufacturing processes, tooling, or place of performance.

(c) There have been no changes to manufacturing data (e.g., drawing revisions that change materials, dimensions, processes, inspection or testing requirements; or subcontractors used to manufacture the items successfully in the past).

(d) The offeror shall supply an item of the same design and manufactured by the same method at the same facilities as the item or similar item previously furnished and accepted under subparagraph (5)(a).

(6) Contractor-Performed FAT.

(a) The contractor shall test the quantities as outlined in paragraph (a) of FAR clause 52.209-3 as specified in the contract. The contractor shall submit reports in accordance with paragraph (b) of FAR clause 52.209-3, as supplemented in this procurement note.

(b] For test report preparation and delivery of contractor FAT, the contractor shall --

(i) Use the data item description DI-NDTI-80809B report format.

(ii)] Mark the test report with the following: “First article test report - Contract number:[ ] and lot/item number: [ ].

(iii) Sign the FAT Report, accompanied by the system of record receiving report (i.e, WAWF or] DD Form 250) and contractor confirmation that the same process and facilities used to manufacture the first article units will be used to manufacture the production units, to the contracting officer at the applicable address shown below:

(A) For awards issued by DLA Aviation; or DLA Troop Support Clothing and Textile (C&T), Medical Materiel, or Subsistence, submit the report to the procuring activity in Block 6 of the DD Form 1155, Block 7 of Standard Form (SF) 33, Block 5 of SF 26, or Block 9 of SF 1449 award.

(B) For awards issued by DLA Land (SPE7L), submit the report to the following address:

DLA Land - FLSEB ATTN: FAT Monitor P. O. Box 3990 Columbus, OH 43218-399, or email to: Land.FAT.Monitor@dla.mil.

(C) For awards issued by DLA Maritime (SPE7M), submit the report to the following address:

DLA Maritime - FMSE ATTN: FAT Monitor P. O. Box 3990 Columbus, OH 43218-3990, or email to: maritime.fat.monitor@dla.mil.

(D) For awards issued by DLA Troop Support Construction and Equipment (SPE8E), email the report to Construction and Equipment FAT Monitor at trpsptcandefatmonitor@dla.mil. If report exceeds email limitations, submit the report to the following address:

DLA Troop Support ATTN: First Article Testing Monitor Building 3, 700 Robbins Avenue Philadelphia, Pennsylvania 19111.

Preferred electronic submissions: Hardware FAT Monitor at DLAHardwareFATMonitor@dla.mil.

(7) The contractor shall --

(a) Provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3;

(b) Maintain and make available all records evidencing those details at the Government's request.

(c) At least fourteen (14) calendar days (or as otherwise specified in the contract) prior to shipment to the Government, provide written notice to the contracting officer and to the cognizant DCMA Functional Specialist when full administration or Quality Support administration is delegated to DCMA.

(8) Government-performed FAT. The contractor shall --

(a) For delivery of separately priced Government first article samples for Government performed FAT ship the units and system of record receiving report (i.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

e., WAWF or DD Form 250) to the test facility specified in paragraph (a) of FAR clause 52.209-4.

(b) For delivery of Government first article samples that are not separately priced, ship the units with a commercial shipping document to the test facility.

(c) Prepare the shipping container(s) by marking the external packages in bold letters, “First Article Exhibits - Do Not Post to Stock," adjacent to the MIL- STD-129 (latest revision) identification markings.

(d) Use a hard copy of the system of record receiving report (i.e., WAWF DD Form 250), or commercial shipping document as a packing list, in accordance with DFARS Appendix F.

(e) Mark the exterior of the shipping container in accordance with MIL-STD-129 (latest revision), paragraph 5.11.

(f) In the interior package, include hard copies of the contract, test reports, material certifications/process operation sheets, drawings used to manufacture the units, and a pre-paid return label or shipping account for payment.

(g) Send units by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express).

(h) Send an email with subject titled “Notification of Test Exhibits [ FB2029 ]” to the corresponding address in (i) or (ii) below and to the contracting officer specified in the contract. In the email, provide the shipment date, contract/purchase order number, National Stock Number, means of transportation, tracking number, and summary of container contents. Attach a copy of the system of record receiving report (i.e., WAWF or DD Form 250) documenting the Government has performed the contract quality assurance within the system or record.

(i) DLA Land & Maritime - DSCCProdVerif@dla.mil

(ii) DLA Aviation - DSCR.Test & EvaluationOffice@dla.mil

(9) At its discretion, the Government may return FAT units to the contractor at no cost to the Government. The contractor shall submit the return address and pre-paid return label or shipping account for payment.

(10) If the Government disapproves or conditionally approves Government-performed FAT units, the Government will take action in accordance with FAR 52.209-4.

E10 GOVERNMENT FIRST ARTICLE TEST (FAT) INFORMATION (JUL 2022)

(1) For FAT requirements, the Government will conduct inspection at source and acceptance at destination. The FOB point is destination. Due to known systems limitations, solicitations may contain erroneous inspection, acceptance, and FOB points. This procurement note takes precedence over any conflicting terms.

(2) GOVERNMENT FAT DELIVERY SCHEDULE

(a) 90 Days: To Deliver FAT Units to the Government

(b) 90 Days: Government FAT Evaluation and Notification to Contractor

(c) 236 Days: To Deliver Final Production Quantity After Approval of FAT. If PLT applies, this line will be blank; the number of delivery days for final production quantity will appear in procurement note E03, Production Lot Testing - Contractor, or E04, Production Lot Testing - Government, as applicable]

(d) 416 Total Delivery Days for FAT (Sum of Paragraphs (2)(a) through (2)(c)).

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Title Number Date Tailoring

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-52 CLEARANCE AND DOCUMENTATION REQUIREMENTS - SHIPMENTS TO DOD AIR OR WATER TERMINAL

TRANSSHIPMENT POINTS (DEVIATION 2026-O0038) (FEB 2006) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall -

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table *

Field Name in WAWF Data to be entered in WAWF Guidance

Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a

(SF1449)

(If blank, see resulting award)

Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)

(If blank, see resulting award)

Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)

(If blank, see resulting award)

Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)

Ship To Code SEE SECTION B (If blank, see resulting award)

Ship From Code SEE SECTION B (If blank, see resulting award)

Mark For Code SEE SECTION B (If blank, see resulting award)

Service Approver (DoDAAC)

(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

Field Name in WAWF Data to be entered in WAWF Guidance

Service Acceptor (DoDAAC)

(If blank, see resulting award)

Accept at Other DoDAAC (If blank, see resulting award)

LPO DoDAAC (If blank, see resulting award)

DCAA Auditor DoDAAC (If blank, see resulting award)

Other DoDAAC(s) (If blank, see resulting award)

(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

See administer listed on page 1

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)

H07 SUPPLY ASSURANCE THROUGH MULTISOURCE CONTRACTING (SEP 2017)

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 35 PAGES

SPE4A7-27-Q-0231

SECTION H - SPECIAL CONTRACT REQUIREMENTS (CONTINUED)

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE (DEVIATION 2026-O0038) (FEB 2026) FAR

52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB

2026) FAR

252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN

2023) DFARS

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (JAN 2023) DFARS

52.209-4 FIRST ARTICLE APPROVAL - GOVERNMENT TESTING (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 9.308-2 (a) and (b), insert the following clause:

[Contracting Officer inserts details]

(a) The Contractor shall deliver 1 unit(s) of Lot/Item 1560-012078735 within 90 calendar days from the date of this contract to the Government at HILL AFB 809 MXSS/MXDEB ATTN: FIRST ARTICLE TEST BLDG 849 DEAR JOHN BAY HILL AFB, UT 84056-5713 [insert name and address of the testing facility] for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. This contract elsewhere specifies the characteristics that the first article must meet and the testing requirements.

(…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .