REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE4A7-27-Q-0209

1. REQUEST NO.

2026 NOV 05

2. DATE ISSUED

7017915097

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA WEAPONS SUPPORT

ASC SUPPLIER OPER AE AND AF DIV

6090 STRATHMORE ROAD

RICHMOND VA 23237

USA

Buyer: Rahsaan Deloney DRD0025 Tel: 804-279-5594 Email: Rahsaan.Deloney@dla.mil

196 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 12

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 34 PAGES

SPE4A7-27-Q-0209

The following DLA Aviation Notices are incorporated by reference. The full text of the notices can be found at:

http://www.dla.mil/b Aviation/Business/Industry Resources/DLA Resources for Suppliers/DAANs.aspx

PGN-13-01 Evaluation and Award for Simplified Acquisitions (August 2024)

PGN-13-01 (ALT I) Evaluation and Award for Simplified Acquisitions (March 2018)

PGN-13-06 All or None for Simplified Acquisitions (September 2019)

PGN-09-01 National Stock Number (NSN) Identification of First Article Testing (September 2016)

PAGE 3 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLIES/SERVICES: 1680-01-413-6055

ITEM DESCRIPTION:

SEAT, AIRCRAFT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RT001: MEASURING AND TEST EQUIPMENT

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

PAGE 4 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

3312235; -12. NOTE 14 APPLIES. 382980; G14 AND EO; EO 2009C0001-R

APPLY.0101; CANCELLED USE STP60-505. 0227; CANCELLED USE

STP63-001.200415485; NOTES 1, 3, 6, 12 AND 14 APPLY.

CRITICAL APPLICATION ITEM

TDP Rev E Gen 5

IAW BASIC DRAWING NR 98897 3312235

REVISION NR E DTD 07/13/2010

PART PIECE NUMBER: 3312235-12

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 STP55-104

REVISION NR J DTD 12/17/2020

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR BA DTD 05/11/2023

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR AA DTD 06/23/2025

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 36659 LS881

REVISION NR AA DTD 11/11/2014

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR Y DTD 12/18/2024

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR AN DTD 05/18/2022

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 382989

REVISION NR DTD 03/06/1959

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 0581

REVISION NR BC DTD 11/02/2023

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR AN DTD 01/21/2021

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AJ DTD 05/28/2026

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 0471

REVISION NR BB DTD 04/26/2021

PAGE 5 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98752 200920837

REVISION NR E DTD 05/03/2022

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 3312235

REVISION NR E DTD 12/02/2024

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR Y DTD 11/18/2021

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 36659 LS881

REVISION NR AA DTD 03/01/2022

PART PIECE NUMBER:

TDP Rev E Gen 5

IAW REFERENCE DRAWING NR 98752 200920837

REVISION NR E DTD 08/26/2025

PART PIECE NUMBER:

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1680-01-413-6055 1.000 EA $ ________________ $ ________________

SEAT,AIRCRAFT

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

SW3120

PAGE 6 OF 34 PAGES

SPE4A7-27-Q-0209

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

SW3120

DLA DISTRIBUTION ANNISTON

TRANS OFFICER 256-676-2894

7 FRANKFORD AVE BLDG 362

ANNISTON AL 36201-4199

0002 1680-01-413-6055 2.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

SW3122

DLA DISTRIBUTION JACKSONVILLE

BLDG 175 SWAN ROAD

JACKSONVILLE FL 32212-0103

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

PAGE 7 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

CONTRACT

FREIGHT SHIPPING ADDRESS:

SW3122

DLA DISTRIBUTION JACKSONVILLE

BLDG 175 SWAN ROAD

RAYMOND MORGAN 904-661-5135

JACKSONVILLE FL 32212-0103

0003 1680-01-413-6055 2.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

SW3218

DLA DISTRIBUTION SAN DIEGO

3581 CUMMINGS ROAD BLDG 3581

SAN DIEGO CA 92136-3581

PAGE 8 OF 34 PAGES

SPE4A7-27-Q-0209

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

SW3218

DLA DISTRIBUTION SAN DIEGO

3581 CUMMINGS ROAD BLDG 3581

SAN DIEGO CA 92136-3581

0004 1680-01-413-6055 9.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PAGE 9 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SW3113

DLA DISTRIBUTION CHERRY POINT

PHANTOM RD BLDG 147 BAY A

CHERRY POINT NC 28533-5040

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

SW3113

DLA DISTRIBUTION CHERRY POINT

PHANTOM RD BLDG 147 BAY A

CHERRY POINT NC 28533-5040

0005 1680-01-413-6055 18.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PAGE 10 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

0006 1680-01-413-6055 21.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 196 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

PAGE 11 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION B

SUPPLY/SERVICE: 1680-01-413-6055 CONT'D

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN RD

REC WHSE 57

TRACY CA 95304-5000

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

PAGE 12 OF 34 PAGES

SPE4A7-27-Q-0209

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

25600 S CHRISMAN RD REC WHSE 57

TRACY CA 95304-5000

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7017915097 0001 N/A N/A N/A 08/30/2027

0002 7017915097 0002 N/A N/A N/A 08/30/2027

0003 7017915097 0003 N/A N/A N/A 08/30/2027

0004 7017915097 0004 N/A N/A N/A 08/30/2027

0005 7017915097 0005 N/A N/A N/A 08/30/2027

0006 7017915097 0006 N/A N/A N/A 08/30/2027

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (SEP 2021)

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material: Yes [ ] No [ ] If yes, the offeror purchased the material from a Government selling agency or other source. Yes [ ] No [ ] If yes, complete the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year):

(3) The material has been altered or modified. Yes [ ] No [ ] If Yes, complete the following:

Name of the company that performed the alternation or modification Address:

Complete description of the alternations or modifications:

(4) The material has been reconditioned. Yes [ ] No [ ] If Yes, complete the following:

(i) The price offered includes the cost of reconditioning/refurbishment. Yes [ ] No [ ]

(ii) Name of the company that reconditioned that material

(iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

The material contains cure-dated components. Yes [ ] No [ ] If Yes, complete the following:

(i)The price includes replacement of cure-dated components. Yes [ ] No [ ]

(ii) Cure date:

(5) The material has data plates attached. Yes [ ] No [ ] If Yes, insert all information contained on the data plate:

(6)The offered material is in its original package. Yes [ ] No [ ] If Yes, complete the following:

Contract Number:

NSN:

CAGE Code:

Part Number:

Other Markings/Data:

(7)The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ] If Yes, complete the following:

(i) The material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ]

(ii) State below the Government Agency and contract number under which the material was previously provided:

Agency:

Contract Number:

(8)The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ] If Yes, complete the following:

(i) The specification/drawing is in the possession of the offeror. Yes [ ] No [ ]

(ii) The offeror has stated the applicable information below: Yes [ ] No [ ] Specification/Drawing Number:

Revision: (if any):

Date:

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ] If Yes, complete the following:

(i) Material has been re-preserved. Yes [ ] No [ ]

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

(ii) Material has been repackaged. Yes [ ] No [ ]

(iii) Percentage of material that has been inspected is %; and/or

(iv) Number of items inspected is

(v) A written report was prepared. Yes [ ] No [ ] The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation.

(i) Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror will forward to the contracting officer one of the following, within 24 hours of request by the contracting officer to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

[ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

[ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

[ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (6) of this procurement note. Yes [ ] No [ ] .)

[ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe:

This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Title Number Date Tailoring

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

E05 PRODUCT VERIFICATION TESTING (MAY 2020)

(1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory.

(2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing.

(3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor's signed DD Form 1222.

The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples - Do Not Post to Stock," Contract Number [ ] and Lot/Item Number [ ]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package:

(a) Hard copies of the contract;

(b) Material certifications/process operation sheets; and

(c) Drawings used to manufacture the units and return shipping information.

(4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery.

(5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor.

E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018)

Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below.

The contractor shall indicate the location where supplies will be inspected, if different from the production location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

The contractor shall indicate the location where packaging will be inspected, if different from the production location:

[ ] Same as for supplies OR CAGE code:

Address:

Applicable to CLIN(s):

The contractor shall indicate the location where supplies will be accepted, if different from the inspection location:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line item numbers(s) (CLIN(s)):

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-29 F.O.B. ORIGIN (FEB 2006) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:

(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

https://www.acquisition.gov/dfars/part-232-contract-financing

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

(c) WAWF access. To access WAWF, the Contractor shall -

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items -

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table *

Field Name in WAWF Data to be entered in WAWF Guidance

Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a

(SF1449)

(If blank, see resulting award)

Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)

(If blank, see resulting award)

Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)

(If blank, see resulting award)

Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)

Ship To Code SEE SECTION B (If blank, see resulting award)

Ship From Code SEE SECTION B (If blank, see resulting award)

Mark For Code SEE SECTION B (If blank, see resulting award)

Service Approver (DoDAAC)

(If blank, see resulting award)

Service Acceptor (DoDAAC)

(If blank, see resulting award)

Accept at Other DoDAAC (If blank, see resulting award)

LPO DoDAAC (If blank, see resulting award)

DCAA Auditor DoDAAC (If blank, see resulting award)

Other DoDAAC(s) (If blank, see resulting award)

(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)

(** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

See administer listed on page 1

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE (DEVIATION 2026-O0038) (FEB 2026) FAR

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB

2026) FAR

252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN

2023) DFARS

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED (DEVIATION 2026-O0038) (FEB 2026) FAR

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY

THAT IS A STATE SPONSOR OF TERRORISM (MAY 2019) DFARS

52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR

52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEVIATION 2026-O038) (FEB 2026) FAR

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2026-O0038) (FEB 2026) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 34 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (DEVIATION 2026-O0038) (FEB 2026) FAR

52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION 2026-O0040, REVISION 1) (APR 2026)

52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR

252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR

USE ON MILITARY INSTALLATIONS (MAR 2024) FAR

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (FEB 2024) DFARS

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM, ALT II (FEB 2024) DFARS

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS

252.225-7006 ACQUISITION OF THE AMERICAN FLAG (DEC 2022) DFARS

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022) DFARS

252.225-7013 DUTY-FREE ENTRY (OCT 2025) DFARS

252.225-7015 RESTRICTION ON ACQUISITION OF HAND OR MEASURING TOOLS (JUN 2005) DFARS

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS

252.225-7060 PROHIBITION ON CERTAIN PROCUREMENTS FROM THE XINJIANG UYGHUR AUTONOMOUS REGION (JUN 2023)

DFARS

52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024) FAR

52.227-1 AUTHORIZATION AND CONSENT (JUN 2020) FAR

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT (JUN 2020) FAR

252.227-7013 RIGHTS IN TECHNICAL DATA -- OTHER THAN COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR

2023) DFARS

As prescribed in 227.7103-6 (a), use the following clause:

(a) Definitions. As used in this clause --

(1) Computer data base means a collection of data recorded in a form capable of being processed by a computer. The term does not include computer software.

(2) Computer program means a set of instructions, rules, or routines recorded in a form that is capable of causing a computer to perform a specific operation or series of operations.

(3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms, processes, flow charts, formulae and related material that would enable the software to be reproduced, recreated, or recompiled. Computer software does not include computer data https://www.acquisition.gov/dfars/part-227-patents-data-and-copyrights

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 34 PAGES

SPE4A7-27-Q-0209

SECTION I - CONTRACT CLAUSES (CONTINUED)

bases or computer software documentation.

(4) Computer software documentation means owner's manuals, user's manuals, installation instructions, operating instructions, and other similar items, regardless of storage medium, that explain the capabilities of the computer software or provide instructions for using the software.

(5) Covered Government support contractor means a contractor (other than a litigation support contractor covered by 252.204 -7014)under a contract, the primary purpose of which is to furnish independent and impartial advice or technical assistance directly to the Government in support of the Government's management and oversight of a program or effort (rather than to directly furnish an end item or service to accomplish a program or effort), provided that the contractor --

(i) Is not affiliated with the prime contractor or a first-tier subcontractor on the program or effort, or with any direct competitor of such prime contractor or any such first-tier subcontractor in furnishing end items or services of the type developed or produced on the program or effort; and

(ii) Receives access to technical data or computer software for performance of a Government contract that contains the clause at 252.227 -7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

(6) Detailed manufacturing or process data means technical data that describe the steps, sequences, and conditions of manufacturing, processing or assembly used by the manufacturer to produce an item or component or to perform a process.

(7) Developed means that an item, component, or process exists and is workable. Thus, the item or component must have been constructed or the process practiced. Workability is generally established when the item, component, or process has been analyzed or tested sufficiently to demonstrate to reasonable people skilled in the applicable art that there is a high probability that it will operate as intended. Whether, how much, and what type of analysis or testing is required to establish workability depends on the nature of the item, component, or process, and the state of the art. To be considered “developed,” the item, component, or process need not be at the stage where it could be offered for sale or sold on the commercial market, nor must the item, component, or process be actually reduced to practice within the meaning of Title 35 of the United States Code.

(8) Developed exclusively at private expense means development was accomplished entirely with costs charged to indirect cost pools, costs not allocated to a government contract, or any combination thereof.

(i) Private expense determinations should be made at the lowest practicable level.

(ii) Under fixed-price contracts, when total costs are greater than the firm-fixed-price or ceiling price of the contract, the additional development costs necessary to complete development shall not be considered when determining whether development was at government, private, or mixed expense.

(9) Developed exclusively with government funds means development was not accomplished exclusively or partially at private expense.

(10) Developed with mixed funding means development was accomplished partially with costs charged to indirect cost pools and/or costs not allocated to a government contract, and partially with costs charged directly to a government contract.

(11) Form, fit, and function data means technical data that describes the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

(12) Government purpose means any activity in which the United…