SPE4A627T9829.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A6-27-T-9829

2. DATE ISSUED

2026 NOV 06

3. REQUISITION/PURCHASE REQUEST NO.

7019028504

RATING

DO-C9

DLA WEAPONS SUPPORT

ASC COMMODITIES DIVISION

6090 STRATHMORE ROAD

RICHMOND VA 23237

USA

Name: Kory Walker Buyer Code:DKW0064 Tel: 804-279-1868 Email: Kory.Walker@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 13

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 32

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 32 PAGES

SPE4A6-27-T-9829

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

FAR 52.219-6 Notice of Total Small Business Set-Aside

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 335311

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

PAGE 3 OF 32 PAGES

SPE4A6-27-T-9829

SECTION A

THE MANUFACTURERS INSPECTION SYSTEM AT A MINIMUM MUST COMPLY WITH SAE

AS9003 OR ISO 9001 TAILORED TO THE REQUIREMENTS OF SAE AS9003. IF THE

STANDARD THAT APPLIES TO YOUR COMPANY IS NOT AVAILABLE ON DIBBS AS A

SELECTION, THEN SELECT “OTHER” THEN SPECIFY WHAT “OTHER EQUIVALENT”

STANDARD APPLIES.

Fast Pay does not apply to this solicitation

FIRST ARTICLE APPROVAL – CONTRACTOR TESTING REQUIRED (FAR 52.209-3 and

ALT I)

THE CONTRACTOR SHALL TEST 2 UNIT(S) OF

LOT/ITEM 6150 / 16695727 AS

SPECIFIED IN THIS CONTRACT. PROVIDE WRITTEN NOTICE TO THE CONTRACTING

OFFICER AND THE QAR AT LEAST FOURTEEN (14) CALENDAR DAYS PRIOR TO

SHIPMENT TO GOVERNMENT FOR FAT, TO ACCOMODATE IN-PROCESS VERIFICATION

AND/OR FINAL INSPECTION BY THE QAR. THE CONTRACTOR SHALL SUBMIT THE

FIRST ARTICLE TEST REPORT WITHIN 90 CALENDAR

DAYS FROM THE DATE OF THIS CONTRACT. NOTIFICATION AND SUBMITTAL

ADDRESSES ARE IAW PROCUREMENT NOTE H03. WITHIN

30 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE TEST REPORT, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE. SEE PROCUREMENT NOTE H03:

SUPPLEMENTAL FIRST ARTICLE TESTTING REQUIREMENTS (SEP 2016) - FOR

ADDITIONAL FAT REQUIREMENTS.

DISPOSITION OF FIRST ARTICLES:

Procurement Note E01: Supplemental First Article Exhibit Disposition - Contractor Maintained (MAY 2020)

The first article units will be maintained or returned to the contractor to be used as a manufacturing standard. The contractor shall hold the approved first article units at the production facility until all production quantities have been produced and accepted. In the case of indefinite delivery contracts, the contractor shall hold the first article units until final production run has been approved and accepted on the first delivery order. The unit shall be considered a production guide or manufacturing standard if defects are reported on delivered material or problems are encountered during production. When disposing the units, the contractor shall follow DFARS 252.245-7004(d).

FIRST ARTICLE – CONTRACTOR TESTING – DCMA DELEGATION

Notice to Contractor: The Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) is delegated the authority to approve/disapprove the First Article Test Report submitted in accordance with the requirements in this contract. Any reference to the Contracting Officer as it relates to submission of and approval/disapproval of the FAT Report shall be deemed to mean the DCMA

PAGE 4 OF 32 PAGES

SPE4A6-27-T-9829

SECTION A

ACO.

Notice to ACO: The DCMA ACO shall forward a copy of the First Article Test Report and the DCMA ACO’s letter of approval/disapproval to the Contracting Officer at the buying activity and to the address identified in FAR Clause 52.209-3(b).

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

PAGE 5 OF 32 PAGES

SPE4A6-27-T-9829

SECTION A

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

PAGE 6 OF 32 PAGES

SECTION A

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

Procurement History for NSN/FSC:016695727/6150

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

6ZSR8 SPE4A627P2489 18.000 14225.00000 20261020 N

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce

PAGE 7 OF 32 PAGES

SPE4A6-27-T-9829

SECTION A

cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/

PAGE 8 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

PR: 7019028504

NSN/MATERIAL:6150016695727

ITEM DESCRIPTION

WIRING HARNESS

WIRING HARNESS

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

FULL AND OPEN COMPETITION APPLY

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

PAGE 9 OF 32 PAGES

SECTION B

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

RT001: MEASURING AND TEST EQUIPMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

CRITICAL APPLICATION ITEM

TDP Rev E Gen 32

IAW BASIC DRAWING NR 19207 12603185

REVISION NR N DTD 02/25/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421876

REVISION NR D DTD 09/04/2020

PART PIECE NUMBER:

PAGE 10 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7060818

REVISION NR H DTD 06/10/2015

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421852

REVISION NR B DTD 10/01/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 8338561

REVISION NR N DTD 09/01/2011

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 8338564

REVISION NR J DTD 06/10/2015

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421855

REVISION NR A DTD 07/17/2009

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421925

REVISION NR A DTD 10/15/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421926

REVISION NR A DTD 10/15/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421887

REVISION NR A DTD 08/24/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7060816

REVISION NR J DTD 07/30/2009

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421849

REVISION NR E DTD 09/04/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12422634

REVISION NR E DTD 09/04/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423385

REVISION NR B DTD 05/28/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7060817

REVISION NR H DTD 07/30/2009

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7982736

REVISION NR R DTD 12/21/2017

PAGE 11 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 8338566

REVISION NR N DTD 09/01/2011

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7762687

REVISION NR R DTD 06/10/2015

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12417666

REVISION NR B DTD 07/23/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12420957

REVISION NR D DTD 08/08/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12422676

REVISION NR B DTD 09/25/2024

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423132

REVISION NR C DTD 07/16/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 7982997

REVISION NR K DTD 06/10/2015

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 8338562

REVISION NR M DTD 06/10/2015

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423144

REVISION NR C DTD 08/12/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423806

REVISION NR A DTD 06/25/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423807

REVISION NR DTD 07/13/2006

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423808

REVISION NR DTD 07/13/2006

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423809

REVISION NR A DTD 06/25/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421843

REVISION NR H DTD 04/08/2026

PAGE 12 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421846

REVISION NR D DTD 03/24/2022

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421850

REVISION NR C DTD 09/04/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421875

REVISION NR B DTD 08/14/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12423133

REVISION NR B DTD 10/01/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12420924

REVISION NR H DTD 06/10/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12562900

REVISION NR DTD 11/07/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12562910

REVISION NR DTD 11/07/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607498

REVISION NR A DTD 07/25/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607803

REVISION NR B DTD 08/07/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606209

REVISION NR B DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605613

REVISION NR C DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605740

REVISION NR B DTD 04/03/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606219

REVISION NR A DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607667

REVISION NR A DTD 01/20/2020

PAGE 13 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12612043

REVISION NR A DTD 03/10/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607286

REVISION NR E DTD 12/09/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608759

REVISION NR A DTD 11/05/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12611590

REVISION NR A DTD 11/20/2018

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603072

REVISION NR A DTD 09/12/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603738

REVISION NR A DTD 05/20/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603745

REVISION NR A DTD 05/20/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606180

REVISION NR B DTD 07/17/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608971

REVISION NR DTD 04/03/2017

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605738

REVISION NR D DTD 05/11/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605730

REVISION NR C DTD 04/03/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605736

REVISION NR C DTD 04/03/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607651

REVISION NR B DTD 09/04/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607793

REVISION NR A DTD 08/07/2019

PAGE 14 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608953

REVISION NR B DTD 09/06/2018

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12562906

REVISION NR DTD 11/07/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12562907

REVISION NR DTD 11/07/2012

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605749

REVISION NR C DTD 04/03/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607696

REVISION NR B DTD 03/06/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607711

REVISION NR B DTD 05/28/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606195

REVISION NR B DTD 11/05/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607650

REVISION NR C DTD 04/27/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12604358

REVISION NR A DTD 07/25/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607496

REVISION NR A DTD 03/06/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607636

REVISION NR A DTD 10/24/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607798

REVISION NR B DTD 08/07/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606170

REVISION NR c DTD 05/28/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605619

REVISION NR A DTD 08/26/2019

PAGE 15 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605791

REVISION NR B DTD 01/24/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607647

REVISION NR B DTD 01/20/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 PPAP-JLTV

REVISION NR DTD 01/01/2022

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607606

REVISION NR B DTD 10/15/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607607

REVISION NR C DTD 03/04/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607608

REVISION NR C DTD 03/04/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607609

REVISION NR C DTD 03/04/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605596

REVISION NR A DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608188

REVISION NR A DTD 09/03/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607665

REVISION NR C DTD 03/04/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607666

REVISION NR B DTD 01/20/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607801

REVISION NR A DTD 08/07/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605597

REVISION NR A DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603167

REVISION NR A DTD 06/12/2018

PAGE 16 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603673

REVISION NR A DTD 11/11/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605768

REVISION NR B DTD 04/23/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606207

REVISION NR C DTD 05/28/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606340

REVISION NR A DTD 09/24/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606346

REVISION NR A DTD 09/03/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607513

REVISION NR B DTD 05/14/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607531

REVISION NR B DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607641

REVISION NR B DTD 01/20/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607788

REVISION NR B DTD 08/07/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608645

REVISION NR A DTD 01/24/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608732

REVISION NR A DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12609635

REVISION NR A DTD 08/29/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12609139

REVISION NR DTD 08/03/2017

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12609666

REVISION NR DTD 05/01/2018

PAGE 17 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12609636

REVISION NR A DTD 08/29/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12609634

REVISION NR A DTD 08/29/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608720

REVISION NR A DTD 01/24/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608714

REVISION NR DTD 06/29/2017

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608205

REVISION NR A DTD 08/07/2017

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608194

REVISION NR A DTD 06/24/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12608156

REVISION NR A DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607805

REVISION NR A DTD 01/24/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607767

REVISION NR B DTD 09/18/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607765

REVISION NR B DTD 09/18/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607713

REVISION NR B DTD 05/28/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607643

REVISION NR B DTD 01/20/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607628

REVISION NR C DTD 04/27/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606588

REVISION NR A DTD 07/25/2019

PAGE 18 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12606218

REVISION NR B DTD 08/26/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605600

REVISION NR B DTD 07/31/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12604742

REVISION NR B DTD 02/25/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12604736

REVISION NR B DTD 02/25/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12604414

REVISION NR B DTD 10/09/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603572

REVISION NR B DTD 08/13/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603186

REVISION NR A DTD 09/13/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12601925

REVISION NR C DTD 03/27/2024

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12505868

REVISION NR DTD 06/11/2008

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12505869

REVISION NR DTD 06/11/2008

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12603185

REVISION NR 06 DTD 06/24/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12605771

REVISION NR C DTD 11/12/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607664

REVISION NR B DTD 01/20/2020

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607670

REVISION NR B DTD 10/24/2019

PAGE 19 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607673

REVISION NR A DTD 03/07/2019

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12607691

REVISION NR c DTD 04/28/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614427

REVISION NR A DTD 07/12/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12695985

REVISION NR DTD 05/18/2022

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614431

REVISION NR A DTD 07/08/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614484

REVISION NR A DTD 07/08/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12689929

REVISION NR DTD 12/10/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614366

REVISION NR A DTD 07/08/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614415

REVISION NR A DTD 07/08/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614512

REVISION NR A DTD 07/06/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12689786

REVISION NR DTD 11/05/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12696388

REVISION NR DTD 09/28/2022

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614543

REVISION NR A DTD 07/22/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12685132

REVISION NR B DTD 05/28/2026

PAGE 20 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614425

REVISION NR A DTD 07/12/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614482

REVISION NR A DTD 07/16/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12421830

REVISION NR B DTD 04/07/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614437

REVISION NR A DTD 07/08/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718279

REVISION NR - DTD 12/05/2025

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718281

REVISION NR DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718285

REVISION NR - DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12614541

REVISION NR A DTD 07/06/2021

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718258

REVISION NR DTD 03/10/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718259

REVISION NR DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718268

REVISION NR DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718270

REVISION NR DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718286

REVISION NR DTD 01/20/2026

PART PIECE NUMBER:

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718288

REVISION NR DTD 01/20/2026

PAGE 21 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

TDP Rev E Gen 32

IAW REFERENCE DRAWING NR 19207 12718289

REVISION NR DTD 03/19/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7019028504 0001 EA 21.000

NSN/MATERIAL:6150016695727

DELIVERY (IN DAYS):0291

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:BS OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2083 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

PAGE 22 OF 32 PAGES

SPE4A6-27-T-9829

SECTION B

PR: 7019028504 PRLI: 0001 CONT’D

US

Need Ship Date:05/04/2027 Original Required Delivery Date:08/31/2027

CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000053

DELIVERY (IN DAYS):0090

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 23 OF 32 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 24 OF 32 PAGES

SPE4A6-27-T-9829

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 25 OF 32 PAGES

SPE4A6-27-T-9829

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if applicable

Ship From Code See Resulting Award if applicable

Mark For Code See Resulting Award if applicable

Service Approver (DoDAAC)

See Resulting Award if applicable

Service Acceptor (DoDAAC)

See Resulting Award if applicable

Accept at Other DoDAAC See Resulting Award if applicable

LPO DoDAAC See Resulting Award if applicable

DCAA Auditor DoDAAC See Resulting Award if applicable

Other DoDAAC(s) See Resulting Award if applicable

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Contact the local contract administrator found in block 6 of the DD 1155 (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7999 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (DEVIATION 2026-O0015) (FEB 2026)

(DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 26 OF 32 PAGES

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) (DFARS)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA—BASIC (OCT 2024) (DFARS)

(a) Definitions. As used in this clause -- "Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any water-borne transportation aboard a ship, vessel, boat, barge, ferry, or the like outside the internal waters of the United States as defined in 33 CFR 2.24.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means supplies that are clearly identifiable for eventual use by or owned by DoD at the time of transportation by sea, or are otherwise transported by DoD, regardless of ownership or use by DoD. An item is clearly identifiable for eventual use by DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

"U.S.-flag vessel" means either a vessel belonging to the United States or a vessel of the United States as that term is defined in 46 U.S.C. 116.

(b) If the transportation of supplies by sea is anticipated under this contract, the Contractor shall --

(1) Notify the Contracting Officer and Maritime Administration (MARAD) at Cargo.Marad@dot.gov --

(i) Within 3 business days after contract award; or

(ii) Immediately prior to the shipment departure date necessary to meet delivery schedules, whichever is earlier; and

(2) Include in the notification --

(i) A statement of the Contractor's intent to transport supplies by sea;

(ii) The contract number; and

(iii) The task-order or delivery-order number, when applicable.

(c)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if --

(i) This contract is a construction contract; or

(ii) The supplies being transported are --

(A) Other than commercial products; or

(B) Commercial products that -- (1)The…